topic Re: Need Advise on desiding a micorcontroller in S12 / MagniV Microcontrollers https://community.nxp.com/t5/S12-MagniV-Microcontrollers/Need-Advise-on-desiding-a-micorcontroller/m-p/128988#M1035 <HTML><HEAD></HEAD><BODY><DIV>If you are completely new to embedded technology, I can suggest you do not select a microcontroller but go for a full fledged tested Data Acquisition Card, which you can interface with PC. Since your&nbsp; spec. are ready&nbsp;this will be easier.</DIV><DIV>&nbsp;</DIV><DIV>&nbsp;</DIV><DIV>&nbsp;</DIV></BODY></HTML> Fri, 17 Mar 2006 17:39:22 GMT samiran_cj 2006-03-17T17:39:22Z Need Advise on desiding a micorcontroller https://community.nxp.com/t5/S12-MagniV-Microcontrollers/Need-Advise-on-desiding-a-micorcontroller/m-p/128987#M1034 <HTML><HEAD></HEAD><BODY><DIV>Hi all,</DIV><DIV>&nbsp;</DIV><DIV>I am new to this embedded technology but i know what i need very speicfically.</DIV><DIV>&nbsp;</DIV><DIV>I need to Controlle the following things</DIV><DIV>&nbsp;</DIV><DIV>1) 50 Digital I/0</DIV><DIV>2) 5 analog&nbsp; temperature sensor, pressure monitor - Data recorded very mint for and should be stored at least last 5 hours of data.</DIV><DIV>3) USB and Serial communication - prefred USB</DIV><DIV>4) 2 - interrupts</DIV><DIV>5) single line LED marque display</DIV><DIV>&nbsp;</DIV><DIV>Can any one advise what kind of processor and memory i can go with.</DIV><DIV>Should program in C or C++. My software user interface will be in vb.net mostly.</DIV><DIV>&nbsp;</DIV><DIV>Thanks in advance,</DIV><DIV><A class="jive-link-email-small" href="mailto:suresh@fuseflow.com">suresh@fuseflow.com</A>&nbsp;</DIV><DIV>Suresh</DIV><DIV>&nbsp;</DIV></BODY></HTML> Fri, 17 Mar 2006 02:36:38 GMT https://community.nxp.com/t5/S12-MagniV-Microcontrollers/Need-Advise-on-desiding-a-micorcontroller/m-p/128987#M1034 SureshF 2006-03-17T02:36:38Z Re: Need Advise on desiding a micorcontroller https://community.nxp.com/t5/S12-MagniV-Microcontrollers/Need-Advise-on-desiding-a-micorcontroller/m-p/128988#M1035 <HTML><HEAD></HEAD><BODY><DIV>If you are completely new to embedded technology, I can suggest you do not select a microcontroller but go for a full fledged tested Data Acquisition Card, which you can interface with PC. Since your&nbsp; spec. are ready&nbsp;this will be easier.</DIV><DIV>&nbsp;</DIV><DIV>&nbsp;</DIV><DIV>&nbsp;</DIV></BODY></HTML> Fri, 17 Mar 2006 17:39:22 GMT https://community.nxp.com/t5/S12-MagniV-Microcontrollers/Need-Advise-on-desiding-a-micorcontroller/m-p/128988#M1035 samiran_cj 2006-03-17T17:39:22Z