// SPDX-License-Identifier: GPL-2.0+
/*
 * Copyright 2017-2018 NXP
 */

/dts-v1/;

#include "fsl-imx8qm.dtsi"

/ {
	model = "NXP i.MX8QM MEK";
	compatible = "fsl,imx8qm-mek", "fsl,imx8qm";

	aliases {
		//gpio8 = &max7322;
	};

	chosen {
		bootargs = "console=ttyLP0,115200 earlycon";
		stdout-path = &lpuart0;
	};

	regulators {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <0>;

		reg_usb_otg1_vbus: regulator@0 {
			compatible = "regulator-fixed";
			reg = <0>;
			regulator-name = "usb_otg1_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
			enable-active-high;
		};

		// reg_usdhc2_vmmc: usdhc2_vmmc {
		// 	compatible = "regulator-fixed";
		// 	regulator-name = "sw-3p3-sd1";
		// 	regulator-min-microvolt = <3300000>;
		// 	regulator-max-microvolt = <3300000>;
		// 	gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
		// 	off-on-delay-us = <4800>;
		// 	enable-active-high;
		// };

		epdev_on: fixedregulator@100 {
			compatible = "regulator-fixed";
			pinctrl-names = "default", "sleep";
			pinctrl-0 = <&pinctrl_wlreg_on>;
			pinctrl-1 = <&pinctrl_wlreg_on_sleep>;
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			regulator-name = "epdev_on";
			gpio = <&gpio1 13 0>;
			enable-active-high;
		};
	};
};

&iomuxc {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hog>;

	imx8qm-mek {
		pinctrl_hog: hoggrp {
			fsl,pins = <
				SC_P_USB_SS3_TC0_LSIO_GPIO4_IO03	  0x06000048
				/*SC_P_LVDS0_I2C0_SCL_LSIO_GPIO1_IO06	  0x06000021
				SC_P_LVDS0_I2C0_SDA_LSIO_GPIO1_IO07	  0x06000021*/
				SC_P_QSPI1A_SS1_B_LSIO_GPIO4_IO20		  0x06000021
				SC_P_QSPI1A_DATA2_LSIO_GPIO4_IO24		  0x06000021
				SC_P_QSPI1A_DATA3_LSIO_GPIO4_IO23		  0x06000021
			>;
		};

		pinctrl_fec1: fec1grp {
			fsl,pins = <
				SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD	0x000014a0
				SC_P_ENET0_MDC_CONN_ENET0_MDC			0x06000020
				SC_P_ENET0_MDIO_CONN_ENET0_MDIO			0x06000020
				SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x00000061
				SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC	0x00000061
				SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0	0x00000061
				SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1	0x00000061
				SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2	0x00000061
				SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3	0x00000061
				SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC	0x00000061
				SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x00000061
				SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0	0x00000061
				SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1	0x00000061
				SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2	0x00000061
				SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3	0x00000061
			>;
		};

		pinctrl_fec2: fec2grp {
			fsl,pins = <
				SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD	0x000014a0
				SC_P_ENET1_RGMII_TX_CTL_CONN_ENET1_RGMII_TX_CTL	0x00000060
				SC_P_ENET1_RGMII_TXC_CONN_ENET1_RGMII_TXC	0x00000060
				SC_P_ENET1_RGMII_TXD0_CONN_ENET1_RGMII_TXD0	0x00000060
				SC_P_ENET1_RGMII_TXD1_CONN_ENET1_RGMII_TXD1	0x00000060
				SC_P_ENET1_RGMII_TXD2_CONN_ENET1_RGMII_TXD2	0x00000060
				SC_P_ENET1_RGMII_TXD3_CONN_ENET1_RGMII_TXD3	0x00000060
				SC_P_ENET1_RGMII_RXC_CONN_ENET1_RGMII_RXC	0x00000060
				SC_P_ENET1_RGMII_RX_CTL_CONN_ENET1_RGMII_RX_CTL	0x00000060
				SC_P_ENET1_RGMII_RXD0_CONN_ENET1_RGMII_RXD0	0x00000060
				SC_P_ENET1_RGMII_RXD1_CONN_ENET1_RGMII_RXD1	0x00000060
				SC_P_ENET1_RGMII_RXD2_CONN_ENET1_RGMII_RXD2	0x00000060
				SC_P_ENET1_RGMII_RXD3_CONN_ENET1_RGMII_RXD3	0x00000060
			>;
		};

		pinctrl_flexspi0: flexspi0grp {
			fsl,pins = <
				SC_P_QSPI0A_DATA0_LSIO_QSPI0A_DATA0	0x06000021
				SC_P_QSPI0A_DATA1_LSIO_QSPI0A_DATA1	0x06000021
				SC_P_QSPI0A_DATA2_LSIO_QSPI0A_DATA2	0x06000021
				SC_P_QSPI0A_DATA3_LSIO_QSPI0A_DATA3	0x06000021
				SC_P_QSPI0A_DQS_LSIO_QSPI0A_DQS		0x06000021
				SC_P_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B	0x06000021
				SC_P_QSPI0A_SS1_B_LSIO_QSPI0A_SS1_B	0x06000021
				SC_P_QSPI0A_SCLK_LSIO_QSPI0A_SCLK	0x06000021
				SC_P_QSPI0B_SCLK_LSIO_QSPI0B_SCLK	0x06000021
				SC_P_QSPI0B_DATA0_LSIO_QSPI0B_DATA0	0x06000021
				SC_P_QSPI0B_DATA1_LSIO_QSPI0B_DATA1	0x06000021
				SC_P_QSPI0B_DATA2_LSIO_QSPI0B_DATA2	0x06000021
				SC_P_QSPI0B_DATA3_LSIO_QSPI0B_DATA3	0x06000021
				SC_P_QSPI0B_DQS_LSIO_QSPI0B_DQS		0x06000021
				SC_P_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B	0x06000021
				SC_P_QSPI0B_SS1_B_LSIO_QSPI0B_SS1_B	0x06000021
			>;
		};

		pinctrl_lpuart0: lpuart0grp {
			fsl,pins = <
				SC_P_UART0_RX_DMA_UART0_RX		0x06000020
				SC_P_UART0_TX_DMA_UART0_TX		0x06000020
			>;
		};

		pinctrl_i2c0: i2c0grp {
			fsl,pins = <
				SC_P_HDMI_TX0_TS_SCL_DMA_I2C0_SCL	0x06000021
				SC_P_HDMI_TX0_TS_SDA_DMA_I2C0_SDA	0x06000021
			>;
		};

		pinctrl_pciea: pcieagrp{
			fsl,pins = <
				SC_P_PCIE_CTRL0_CLKREQ_B_LSIO_GPIO4_IO27	0x06000021
				SC_P_PCIE_CTRL0_WAKE_B_LSIO_GPIO4_IO28		0x04000021
				SC_P_PCIE_CTRL0_PERST_B_LSIO_GPIO4_IO29		0x06000021
				SC_P_USDHC2_RESET_B_LSIO_GPIO4_IO09		0x06000021
			>;
		};

		// pinctrl_typec: typecgrp {
		// 	fsl,pins = <
		// 		SC_P_QSPI1A_SS0_B_LSIO_GPIO4_IO19	0x60
		// 		SC_P_USB_SS3_TC3_LSIO_GPIO4_IO06	0x60
		// 		SC_P_QSPI1A_DATA0_LSIO_GPIO4_IO26	0x00000021
		// 	>;
		//  };

		pinctrl_usbotg1: usbotg1 {
			fsl,pins = <
				SC_P_USB_SS3_TC0_CONN_USB_OTG1_PWR		0x00000021
			>;
		};

		// pinctrl_usdhc1: usdhc1grp {
		// 	fsl,pins = <
		// 		SC_P_EMMC0_CLK_CONN_EMMC0_CLK		0x06000041
		// 		SC_P_EMMC0_CMD_CONN_EMMC0_CMD		0x00000021
		// 		SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021
		// 		SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021
		// 		SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021
		// 		SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021
		// 		SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021
		// 		SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021
		// 		SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021
		// 		SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021
		// 		SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000041
		// 		SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B	0x00000021
		// 	>;
		// };

		// pinctrl_usdhc2_gpio: usdhc2grpgpio {
		// 	fsl,pins = <
		// 		SC_P_USDHC1_DATA6_LSIO_GPIO5_IO21	0x00000021
		// 		SC_P_USDHC1_DATA7_LSIO_GPIO5_IO22	0x00000021
		// 		SC_P_USDHC1_RESET_B_LSIO_GPIO4_IO07	0x00000021
		// 	>;
		// };

		// pinctrl_usdhc2: usdhc2grp {
		// 	fsl,pins = <
		// 		SC_P_USDHC1_CLK_CONN_USDHC1_CLK		0x06000041
		// 		SC_P_USDHC1_CMD_CONN_USDHC1_CMD		0x00000021
		// 		SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000021
		// 		SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000021
		// 		SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000021
		// 		SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000021
		// 		SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000021
		// 	>;
		// };

		// pinctrl_lvds0_lpi2c1: lvds0lpi2c1grp {
		// 	fsl,pins = <
		// 		SC_P_LVDS0_I2C1_SCL_LVDS0_I2C1_SCL	0xc600004c
		// 		SC_P_LVDS0_I2C1_SDA_LVDS0_I2C1_SDA	0xc600004c
		// 	>;
		// };

		// pinctrl_lvds1_lpi2c1: lvds1lpi2c1grp {
		// 	fsl,pins = <
		// 		SC_P_LVDS1_I2C1_SCL_LVDS1_I2C1_SCL	0xc600004c
		// 		SC_P_LVDS1_I2C1_SDA_LVDS1_I2C1_SDA	0xc600004c
		// 	>;
		// };

		pinctrl_wlreg_on: wlregongrp{
			fsl,pins = <
				SC_P_LVDS1_I2C0_SDA_LSIO_GPIO1_IO13		0x06000000
			>;
		};

		pinctrl_wlreg_on_sleep: wlregon_sleepgrp{
			fsl,pins = <
				SC_P_LVDS1_I2C0_SDA_LSIO_GPIO1_IO13		0x07800000
			>;
		};
	};
};

&gpio1 {
	status = "okay";
};

&gpio2 {
	status = "okay";
};

&gpio4 {
	status = "okay";
};

&gpio5 {
	status = "okay";
};

&usbotg1 {
	/*vbus-supply = <&reg_usb_otg1_vbus>;
	srp-disable;
	hnp-disable;
	adp-disable;
	disable-over-current;*/
	status = "okay";
};

&usbotg3 {
	status = "disabled";
};

// &usdhc1 {
// 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
// 	pinctrl-0 = <&pinctrl_usdhc1>;
// 	pinctrl-1 = <&pinctrl_usdhc1>;
// 	pinctrl-2 = <&pinctrl_usdhc1>;
// 	bus-width = <8>;
// 	non-removable;
// 	status = "disabled";
// };

// &usdhc2 {
// 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
// 	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
// 	pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
// 	pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
// 	bus-width = <4>;
// 	cd-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
// 	wp-gpios = <&gpio5 21 GPIO_ACTIVE_HIGH>;
// 	vmmc-supply = <&reg_usdhc2_vmmc>;
// 	status = "disabled";
// };

&fec1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_fec1>;
	phy-mode = "rgmii-txid";
	phy-handle = <&ethphy0>;
	fsl,magic-packet;
	fsl,rgmii_rxc_dly;
	status = "okay";

	mdio {
		#address-cells = <1>;
		#size-cells = <0>;

		ethphy0: ethernet-phy@0 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <0>;
			at803x,eee-disabled;
			at803x,vddio-1p8v;
		};

		ethphy1: ethernet-phy@1 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <1>;
			at803x,eee-disabled;
			at803x,vddio-1p8v;
		};
	};
};

&fec2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_fec2>;
	phy-mode = "rgmii";
	phy-handle = <&ethphy1>;
	fsl,ar8031-phy-fixup;
	fsl,magic-packet;
	status = "okay";
};

&flexspi0 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_flexspi0>;
	status = "okay";

	flash0: mt35xu02g@0 {
		compatible = "micron,mt35xu02g", "jedec,spi-nor";
		#address-cells = <1>;
		#size-cells = <1>;
		m25p,fast-read;
		spi-max-frequency = <50000000>;
		reg = <0>;
		/* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
		spi-rx-bus-width = <8>; /* 8 SPI Rx lines */
		spi-tx-bus-width = <1>; /* 1 SPI Tx line */
	};
};

&i2c0 {
	#address-cells = <1>;
	#size-cells = <0>;
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c0>;
	status = "disabled";

	// max7322: gpio@68 {
	// 	compatible = "maxim,max7322";
	// 	reg = <0x68>;
	// 	gpio-controller;
	// 	#gpio-cells = <2>;
	// };

	// typec_ptn5110: typec@50 {
	// 	compatible = "usb,tcpci";
	// 	pinctrl-names = "default";
	// 	pinctrl-0 = <&pinctrl_typec>;
	// 	reg = <0x51>;
	// 	interrupt-parent = <&gpio4>;
	// 	interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
	// 	ss-sel-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
	// 	reset-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>;
	// 	src-pdos = <0x380190c8 0x3803c0c8>;
	// 	port-type = "drp";
	// 	sink-disable;
	// 	default-role = "source";
	// 	status = "disabled";
	// };
};

&lpuart0 { /* console */
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_lpuart0>;
	status = "okay";
};

// &i2c1_lvds0 {
// 	#address-cells = <1>;
// 	#size-cells = <0>;
// 	pinctrl-names = "default";
// 	pinctrl-0 = <&pinctrl_lvds0_lpi2c1>;
// 	clock-frequency = <100000>;
// 	status = "disabled";

// 	lvds-to-hdmi-bridge@4c {
// 		compatible = "ite,it6263";
// 		reg = <0x4c>;

// 		port {
// 			it6263_0_in: endpoint {
// 				clock-lanes = <3>;
// 				data-lanes = <0 1 2 4>;
// 				remote-endpoint = <&lvds0_out>;
// 			};
// 		};
// 	};
// };

// &i2c1_lvds1 {
// 	#address-cells = <1>;
// 	#size-cells = <0>;
// 	pinctrl-names = "default";
// 	pinctrl-0 = <&pinctrl_lvds1_lpi2c1>;
// 	clock-frequency = <100000>;
// 	status = "disabled";

// 	lvds-to-hdmi-bridge@4c {
// 		compatible = "ite,it6263";
// 		reg = <0x4c>;
// 	};
// };

&pciea{
	ext_osc = <1>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pciea>;
	disable-gpio = <&gpio4 9 GPIO_ACTIVE_LOW>;
	reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
	clkreq-gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
	epdev_on = <&epdev_on>;
	status = "okay";
};

// &sata {
// 	pinctrl-names = "default";
// 	pinctrl-0 = <&pinctrl_pciea>;
// 	clkreq-gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
// 	status = "disabled";
// };

&tsens {
	tsens-num = <6>;
};

&thermal_zones {
	pmic-thermal0 {
		polling-delay-passive = <250>;
		polling-delay = <2000>;
		thermal-sensors = <&tsens 5>;
		trips {
			pmic_alert0: trip0 {
				temperature = <110000>;
				hysteresis = <2000>;
				type = "passive";
			};
			pmic_crit0: trip1 {
				temperature = <125000>;
				hysteresis = <2000>;
				type = "critical";
			};
		};
		cooling-maps {
			map0 {
				trip = <&pmic_alert0>;
				cooling-device =
				<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
			};
			map1 {
				trip = <&pmic_alert0>;
				cooling-device =
				<&A72_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
			};
		};
	};
};

// &dpu1 {
// 	status = "disabled";
// };

// &ldb1_phy {
// 	status = "disabled";
// };

// &ldb1 {
// 	status = "disabled";

// 	lvds-channel@0 {
// 		fsl,data-mapping = "jeida";
// 		fsl,data-width = <24>;
// 		status = "disabled";

// 		display-timings {
// 			native-mode = <&timing0>;

// 			timing0: timing0 {
// 				clock-frequency = <74250000>;
// 				hactive = <1280>;
// 				vactive = <720>;
// 				hfront-porch = <220>;
// 				hback-porch = <110>;
// 				hsync-len = <40>;
// 				vback-porch = <5>;
// 				vfront-porch = <20>;
// 				vsync-len = <5>;
// 			};
// 		};

// 		port@1 {
// 			reg = <1>;

// 			lvds0_out: endpoint {
// 				remote-endpoint = <&it6263_0_in>;
// 			};
// 		};
// 	};
// };