sh-4.4# nfcDemoApp poll
#########################################################################################
##                                       NFC demo                                      ##
#########################################################################################
##                                 Poll mode activated                                 ##
#########################################################################################
                              ... press enter to quit ...

2023:03:02-13:26:05.590  find found NXPLOG_TML_LOGLEVEL=(0x3)
2023:03:02-13:26:05.591  GetNxpNumValue: NXP Config Parameter : NXPLOG_TML_LOGLEVEL=(0x3)
2023:03:02-13:26:05.591  find found NXPLOG_FWDNLD_LOGLEVEL=(0x3)
2023:03:02-13:26:05.591  GetNxpNumValue: NXP Config Parameter : NXPLOG_FWDNLD_LOGLEVEL=(0x3)
2023:03:02-13:26:05.591  find found NXPLOG_NCIX_LOGLEVEL=(0x3)
2023:03:02-13:26:05.592  GetNxpNumValue: NXP Config Parameter : NXPLOG_NCIX_LOGLEVEL=(0x3)
2023:03:02-13:26:05.592  find found NXPLOG_NCIR_LOGLEVEL=(0x3)
2023:03:02-13:26:05.592  GetNxpNumValue: NXP Config Parameter : NXPLOG_NCIR_LOGLEVEL=(0x3)
2023:03:02-13:26:05.593  initializeGlobalDebugEnabledFlag: level=1
2023:03:02-13:26:05.593  initializeGlobalDebugEnabledFlag: level=1
2023:03:02-13:26:05.593  readConfig Opened base config /etc/libnfc-nci.conf
2023:03:02-13:26:05.594  NfcAdaptation::Initialize: Overriding NFA_EE_MAX_EE_SUPPORTED to use 1
2023:03:02-13:26:05.595  verify_stack_non_volatile_store
2023:03:02-13:26:05.595  crcChecksumVerifyIntegrity: filename=/nfaStorage.bin1
2023:03:02-13:26:05.595  crcChecksumVerifyIntegrity: filename=/nfaStorage.bin4
2023:03:02-13:26:05.596  crcChecksumVerifyIntegrity: filename=/nfaStorage.bin2
2023:03:02-13:26:05.596  crcChecksumVerifyIntegrity: filename=/nfaStorage.bin3
2023:03:02-13:26:05.596  crcChecksumVerifyIntegrity: filename=/nfaStorage.bin5
2023:03:02-13:26:05.596  Initialize: preserve stack NV store
2023:03:02-13:26:05.600  GKI_create_task func=0x0x7f7fd77f28  id=4  name=NFCA_TASK  stack=0x(nil)  stackSize=0
2023:03:02-13:26:05.600  GKI creating task 4, pCond/pMutex=(nil)/(nil)
2023:03:02-13:26:05.600  Leaving GKI_create_task 0x7f7fd77f28 4 7f7f0731d0 NFCA_TASK (nil) 0
2023:03:02-13:26:05.601  GKI_create_task func=0x0x7f7fd79548  id=0  name=NFCA_THREAD  stack=0x(nil)  stackSize=0
2023:03:02-13:26:05.601  GKI creating task 0, pCond/pMutex=(nil)/(nil)
2023:03:02-13:26:05.601  gki_task_entry task_id=4, thread_id=7f7f0731d0/7f7f0731d0, pCond/pMutex=(nil)/(nil)
2023:03:02-13:26:05.601  NfcAdaptation::NFCA_TASK: enter
2023:03:02-13:26:05.602  GKI_run enter
2023:03:02-13:26:05.602  Start/Stop GKI_timer_update_registered!
2023:03:02-13:26:05.602  GKI_run, run_cond(0x7f7fe447c0)=1
2023:03:02-13:26:05.602  gki_task_entry task_id=0, thread_id=7f7e8721d0/7f7e8721d0, pCond/pMutex=(nil)/(nil)
2023:03:02-13:26:05.603  NfcAdaptation::Thread: enter
2023:03:02-13:26:05.603  GKI_create_task func=0x0x7f7fd32a70  id=3  name=NFC_TASK  stack=0x(nil)  stackSize=0
2023:03:02-13:26:05.603  GKI creating task 3, pCond/pMutex=0x7f7e8718f8/0x7f7e8718c8
2023:03:02-13:26:05.604  Leaving GKI_create_task 0x7f7fd32a70 3 7f7e0711d0 NFC_TASK (nil) 0
2023:03:02-13:26:05.604  gki_task_entry task_id=3, thread_id=7f7e0711d0/7f7e0711d0, pCond/pMutex=0x7f7e8718f8/0x7f7e8718c8
2023:03:02-13:26:05.605  NFC_TASK started.
2023:03:02-13:26:05.605  GKI_wait task=3, pCond/pMutex = 0x7f7e8718f8/0x7f7e8718c8
2023:03:02-13:26:05.606  Leaving GKI_create_task 0x7f7fd79548 0 7f7e8721d0 NFCA_THREAD (nil) 0
2023:03:02-13:26:05.606  GKI_exit_task 0 done
2023:03:02-13:26:05.606  NfcAdaptation::Thread: exit
2023:03:02-13:26:05.606  gki_task task_id=0 terminating
2023:03:02-13:26:05.608  NfcAdaptation::Initialize: exit
2023:03:02-13:26:05.608  NFA_Init
2023:03:02-13:26:05.608  nfa_dm_init
2023:03:02-13:26:05.608  id=1, enable_cplt_mask=0x0
2023:03:02-13:26:05.608  nfa_p2p_init
2023:03:02-13:26:05.608  id=3, enable_cplt_mask=0x8
2023:03:02-13:26:05.609  Nfc: nfa_snep_init (): is_dta_mode=0
2023:03:02-13:26:05.609  Nfc: nfa_snep_default_init ()
2023:03:02-13:26:05.609  id=4, enable_cplt_mask=0x18
2023:03:02-13:26:05.609  nfa_rw_init
2023:03:02-13:26:05.609  id=5, enable_cplt_mask=0x38
2023:03:02-13:26:05.609  nfa_ce_init
2023:03:02-13:26:05.609  id=6, enable_cplt_mask=0x78
2023:03:02-13:26:05.609  nfa_ee_init
2023:03:02-13:26:05.609  id=2, enable_cplt_mask=0x7c
2023:03:02-13:26:05.609  nfa_t4tnfcee_init
2023:03:02-13:26:05.609  find found NXP_T4T_NFCEE_ENABLE=(0x1)
2023:03:02-13:26:05.609  GetNxpNumValue: NXP Config Parameter : NXP_T4T_NFCEE_ENABLE=(0x1)
2023:03:02-13:26:05.609  id=9, enable_cplt_mask=0x27c
2023:03:02-13:26:05.609  llcp_init
2023:03:02-13:26:05.609  num_rx_buff = 9, rx_congest_start = 6, rx_congest_end = 4, max_num_ll_rx_buff = 2
2023:03:02-13:26:05.609  max_num_tx_buff = 21, max_num_ll_tx_buff = 6
2023:03:02-13:26:05.609  SAP:0x1, link_type:0x2, ServiceName:<urn:nfc:sn:sdp>
2023:03:02-13:26:05.609  Registered SAP = 0x01
2023:03:02-13:26:05.609  NFA_Enable
2023:03:02-13:26:05.609  NFA got event 0x0100
2023:03:02-13:26:05.610  event: NFA_DM_API_ENABLE_EVT (0x00)
2023:03:02-13:26:05.610  nfa_dm_enable
2023:03:02-13:26:05.610  NFC_Enable
2023:03:02-13:26:05.610  nfc_set_state 0 (NONE)->1 (W4_HAL_OPEN)
2023:03:02-13:26:05.611  NfcAdaptation::HalOpen
2023:03:02-13:26:05.611  phNxpNci_MinOpen(): enter
2023:03:02-13:26:05.613  find found NXPLOG_NCIHAL_LOGLEVEL=(0x3)
2023:03:02-13:26:05.613  GetNxpNumValue: NXP Config Parameter : NXPLOG_NCIHAL_LOGLEVEL=(0x3)
2023:03:02-13:26:05.613  find found NXPLOG_EXTNS_LOGLEVEL=(0x3)
2023:03:02-13:26:05.613  GetNxpNumValue: NXP Config Parameter : NXPLOG_EXTNS_LOGLEVEL=(0x3)
2023:03:02-13:26:05.614  find found NXPLOG_TML_LOGLEVEL=(0x3)
2023:03:02-13:26:05.614  GetNxpNumValue: NXP Config Parameter : NXPLOG_TML_LOGLEVEL=(0x3)
2023:03:02-13:26:05.614  find found NXPLOG_FWDNLD_LOGLEVEL=(0x3)
2023:03:02-13:26:05.615  GetNxpNumValue: NXP Config Parameter : NXPLOG_FWDNLD_LOGLEVEL=(0x3)
2023:03:02-13:26:05.615  find found NXPLOG_NCIX_LOGLEVEL=(0x3)
2023:03:02-13:26:05.615  GetNxpNumValue: NXP Config Parameter : NXPLOG_NCIX_LOGLEVEL=(0x3)
2023:03:02-13:26:05.615  find found NXPLOG_NCIR_LOGLEVEL=(0x3)
2023:03:02-13:26:05.616  GetNxpNumValue: NXP Config Parameter : NXPLOG_NCIR_LOGLEVEL=(0x3)
2023:03:02-13:26:05.616  phNxpLog_InitializeLogLevel: global =3, Fwdnld =3, extns =3,                     hal =3, tml =3, ncir =3,                     ncix =3
2023:03:02-13:26:05.616  find found MIFARE_READER_ENABLE=(0x1)
2023:03:02-13:26:05.616  GetNxpNumValue: NXP Config Parameter : MIFARE_READER_ENABLE=(0x1)
2023:03:02-13:26:05.617  Entering phNxpNciHal_init_monitor
2023:03:02-13:26:05.617  Returning with SUCCESS
2023:03:02-13:26:05.617  find found NXP_NFC_DEV_NODE
2023:03:02-13:26:05.618  GetNxpStrValue: NXP Config Parameter : NXP_NFC_DEV_NODE
2023:03:02-13:26:05.618  phTmlNfc_Init Entry......
2023:03:02-13:26:05.618  find found NXP_TRANSPORT=(0x0)
2023:03:02-13:26:05.618  GetNxpNumValue: NXP Config Parameter : NXP_TRANSPORT=(0x0)
2023:03:02-13:26:05.619  getTransport Requested transportType: 0
2023:03:02-13:26:05.619  OpenAndConfigure Opening port=/dev/nxpnfc
2023:03:02-13:26:05.629  NfccReset, VEN eType 0
2023:03:02-13:26:05.661  NfccReset, VEN eType 1
2023:03:02-13:26:05.683  PN54X - Tml Reader Thread Started................
2023:03:02-13:26:05.684  phTmlNfc_Init exit wInitStatus=0
2023:03:02-13:26:05.685  PN54X - Tml Writer Thread Started................
2023:03:02-13:26:05.687  PN54X - Tml Writer Thread Running................
2023:03:02-13:26:05.688  PN54X - Write requested.....
2023:03:02-13:26:05.688  PN54X - Invoking I2C Write.....
2023:03:02-13:26:05.689  PN54X - Read requested.....
2023:03:02-13:26:05.690  PN54X - Invoking I2C Read.....
2023:03:02-13:26:05.691  thread started
2023:03:02-13:26:05.693  len =   4 > 20000100
2023:03:02-13:26:05.693  PN54X - I2C Write successful.....
2023:03:02-13:26:05.694  PN54X - Posting Fresh Write message.....
2023:03:02-13:26:05.694  PN54X - Tml Writer Thread Running................
2023:03:02-13:26:05.695  write successful status = 0x0
2023:03:02-13:26:05.696  PN54X - I2C Read successful.....
2023:03:02-13:26:05.697  len =   4 > 40000100
2023:03:02-13:26:05.698  PN54X - Posting read message.....
2023:03:02-13:26:05.699  Response timer started
2023:03:02-13:26:05.700  Waiting after ext cmd sent
2023:03:02-13:26:05.700  read successful status = 0x0
2023:03:02-13:26:05.701  CORE_RESET_RSP NCI2.0
2023:03:02-13:26:05.702  Response timer stopped
2023:03:02-13:26:05.703  Response timer started
2023:03:02-13:26:05.703  PN54X - Read requested.....
2023:03:02-13:26:05.704  PN54X - Invoking I2C Read.....
2023:03:02-13:26:05.707  PN54X - I2C Read successful.....
2023:03:02-13:26:05.708  len =  12 > 600009020020040461125006
2023:03:02-13:26:05.708  PN54X - Posting read message.....
2023:03:02-13:26:05.709  read successful status = 0x0
2023:03:02-13:26:05.709  CORE_RESET_NTF NCI2.0 reason CORE_RESET_CMD received !
2023:03:02-13:26:05.710  nci_version : 0x20
2023:03:02-13:26:05.711  getChipType HwVersion : 0x61
2023:03:02-13:26:05.711  getChipType Product : PN557
2023:03:02-13:26:05.712  phNxpNciHal_configFeatureList chipType = 9
2023:03:02-13:26:05.712  NxpNci> FW Version: 12.50.6
2023:03:02-13:26:05.713  Response timer stopped
2023:03:02-13:26:05.714  Checking response
2023:03:02-13:26:05.714  PN54X - Read requested.....
2023:03:02-13:26:05.715  PN54X - Invoking I2C Read.....
2023:03:02-13:26:05.716  PN54X - Write requested.....
2023:03:02-13:26:05.716  PN54X - Invoking I2C Write.....
2023:03:02-13:26:05.717  len =   5 > 2001020000
2023:03:02-13:26:05.718  PN54X - I2C Write successful.....
2023:03:02-13:26:05.719  PN54X - Posting Fresh Write message.....
2023:03:02-13:26:05.719  PN54X - Tml Writer Thread Running................
2023:03:02-13:26:05.720  write successful status = 0x0
2023:03:02-13:26:05.720  Response timer started
2023:03:02-13:26:05.721  Waiting after ext cmd sent
2023:03:02-13:26:05.722  PN54X - I2C Read successful.....
2023:03:02-13:26:05.723  len =  33 > 40011E001A7E060201D002FFFF01FF000800000100020003008000820083008400
2023:03:02-13:26:05.723  PN54X - Posting read message.....
2023:03:02-13:26:05.724  read successful status = 0x0
2023:03:02-13:26:05.725  CORE_INIT_RSP NCI2.0 received !
2023:03:02-13:26:05.725  Response timer stopped
2023:03:02-13:26:05.726  Checking response
2023:03:02-13:26:05.727  find found NXP_I2C_FRAGMENTATION_ENABLED=(0x0)
2023:03:02-13:26:05.727  GetNxpNumValue: NXP Config Parameter : NXP_I2C_FRAGMENTATION_ENABLED=(0x0)
2023:03:02-13:26:05.728  I2C status : 0
2023:03:02-13:26:05.728  PN54X - Read requested.....
2023:03:02-13:26:05.729  PN54X - Invoking I2C Read.....
2023:03:02-13:26:05.730  PN54X - Write requested.....
2023:03:02-13:26:05.730  PN54X - Invoking I2C Write.....
2023:03:02-13:26:05.732  len =   6 > 20030301A005
2023:03:02-13:26:05.732  PN54X - I2C Write successful.....
2023:03:02-13:26:05.733  PN54X - Posting Fresh Write message.....
2023:03:02-13:26:05.734  PN54X - Tml Writer Thread Running................
2023:03:02-13:26:05.734  write successful status = 0x0
2023:03:02-13:26:05.735  PN54X - I2C Read successful.....
2023:03:02-13:26:05.736  len =   9 > 4003060001A0050100
2023:03:02-13:26:05.737  Response timer started
2023:03:02-13:26:05.737  Waiting after ext cmd sent
2023:03:02-13:26:05.738  PN54X - Posting read message.....
2023:03:02-13:26:05.739  read successful status = 0x0
2023:03:02-13:26:05.739  phNxpNciHal_print_res_status: response status =STATUS_OK
2023:03:02-13:26:05.740  Response timer stopped
2023:03:02-13:26:05.740  Checking response
2023:03:02-13:26:05.741  Allocating Mem for Dnld Context..
2023:03:02-13:26:05.742  find found NXP_FW_TYPE=(0x1)
2023:03:02-13:26:05.742  GetNxpNumValue: NXP Config Parameter : NXP_FW_TYPE=(0x1)
2023:03:02-13:26:05.743  firmware type from conf file: 1
2023:03:02-13:26:05.744  PN54X - Read requested.....
2023:03:02-13:26:05.744  PN54X - Invoking I2C Read.....
2023:03:02-13:26:05.745  @@@//usr//local//lib//libpn7160_fw.so
2023:03:02-13:26:05.745  FW Image Length - ImageInfoLen 34542
2023:03:02-13:26:05.746  FW Image Info Pointer - pImageInfo 0x7f7c843010
2023:03:02-13:26:05.747  FW Major Version Num - 50
2023:03:02-13:26:05.747  FW Minor Version Num - 6
2023:03:02-13:26:05.747  FW Image Length - 34542
2023:03:02-13:26:05.748  FW Image Info Pointer - 0x7f7c843010
2023:03:02-13:26:05.748  FW version for FW file = 0x5006
2023:03:02-13:26:05.748  FW version from device = 0x125006
2023:03:02-13:26:05.749  FW update not required
2023:03:02-13:26:05.749  Freeing Mem for Dnld Context..
2023:03:02-13:26:05.750  PN54X - Write requested.....
2023:03:02-13:26:05.751  PN54X - Invoking I2C Write.....
2023:03:02-13:26:05.752  len =   5 > 2003020100
2023:03:02-13:26:05.753  PN54X - I2C Write successful.....
2023:03:02-13:26:05.754  PN54X - Posting Fresh Write message.....
2023:03:02-13:26:05.754  PN54X - I2C Read successful.....
2023:03:02-13:26:05.755  len =   9 > 40030600010002F401
2023:03:02-13:26:05.755  PN54X - Posting read message.....
2023:03:02-13:26:05.756  PN54X - Tml Writer Thread Running................
2023:03:02-13:26:05.757  write successful status = 0x0
2023:03:02-13:26:05.757  read successful status = 0x0
2023:03:02-13:26:05.758  phNxpNciHal_print_res_status: response status =STATUS_OK
2023:03:02-13:26:05.758  Response timer started
2023:03:02-13:26:05.759  Waiting after ext cmd sent
2023:03:02-13:26:05.760  Response timer stopped
2023:03:02-13:26:05.760  Checking response
2023:03:02-13:26:05.761  phNxpNciHal_MinOpen(): exit
2023:03:02-13:26:05.761  PN54X - Read requested.....
2023:03:02-13:26:05.761  PN54X - Invoking I2C Read.....
2023:03:02-13:26:05.762  NfcAdaptation::HalDeviceContextCallback: event=0
2023:03:02-13:26:05.762  nfc_main_hal_cback event: HAL_NFC_OPEN_CPLT_EVT(0x0), status=0
2023:03:02-13:26:05.762  NFC_TASK got NFC_TASK_EVT_TRANSPORT_READY.
2023:03:02-13:26:05.763  nfc_set_state 1 (W4_HAL_OPEN)->2 (CORE_INIT)
2023:03:02-13:26:05.763  NfcAdaptation::HalWrite
2023:03:02-13:26:05.763  PN54X - Write requested.....
2023:03:02-13:26:05.764  PN54X - Invoking I2C Write.....
2023:03:02-13:26:05.765  len =   4 > 20000100
2023:03:02-13:26:05.765  PN54X - I2C Write successful.....
2023:03:02-13:26:05.765  PN54X - Posting Fresh Write message.....
2023:03:02-13:26:05.766  PN54X - Tml Writer Thread Running................
2023:03:02-13:26:05.766  write successful status = 0x0
2023:03:02-13:26:05.769  PN54X - I2C Read successful.....
2023:03:02-13:26:05.769  len =   4 > 40000100
2023:03:02-13:26:05.769  PN54X - Posting read message.....
2023:03:02-13:26:05.770  read successful status = 0x0
2023:03:02-13:26:05.770  CORE_RESET_RSP NCI2.0
2023:03:02-13:26:05.771  NfcAdaptation::HalDeviceContextDataCallback: len=4
2023:03:02-13:26:05.771  NFC received rsp gid:0
2023:03:02-13:26:05.772  nci_proc_core_rsp opcode:0x0
2023:03:02-13:26:05.772  CORE_RESET_RSP len :0x1
2023:03:02-13:26:05.772  PN54X - Read requested.....
2023:03:02-13:26:05.773  PN54X - Invoking I2C Read.....
2023:03:02-13:26:05.775  PN54X - I2C Read successful.....
2023:03:02-13:26:05.775  len =  12 > 600009020020040461125006
2023:03:02-13:26:05.776  PN54X - Posting read message.....
2023:03:02-13:26:05.776  read successful status = 0x0
2023:03:02-13:26:05.776  CORE_RESET_NTF NCI2.0 reason CORE_RESET_CMD received !
2023:03:02-13:26:05.777  nci_version : 0x20
2023:03:02-13:26:05.777  NxpNci> FW Version: 12.50.6
2023:03:02-13:26:05.777  NfcAdaptation::HalDeviceContextDataCallback: len=12
2023:03:02-13:26:05.777  NFC received ntf gid:0
2023:03:02-13:26:05.778  nci_proc_core_ntf opcode:0x0
2023:03:02-13:26:05.778  reset notification!!:0x2
2023:03:02-13:26:05.779  CORE_RESET_NTF Received status nfc_state : 0x2 : 0x2
2023:03:02-13:26:05.779   CORE_RESET_NTF nci_version20
2023:03:02-13:26:05.780  NfcAdaptation::HalWrite
2023:03:02-13:26:05.780  PN54X - Read requested.....
2023:03:02-13:26:05.780  PN54X - Invoking I2C Read.....
2023:03:02-13:26:05.781  PN54X - Write requested.....
2023:03:02-13:26:05.781  PN54X - Invoking I2C Write.....
2023:03:02-13:26:05.783  len =   5 > 2001020000
2023:03:02-13:26:05.783  PN54X - I2C Write successful.....
2023:03:02-13:26:05.784  PN54X - Posting Fresh Write message.....
2023:03:02-13:26:05.784  PN54X - Tml Writer Thread Running................
2023:03:02-13:26:05.785  write successful status = 0x0
2023:03:02-13:26:05.787  PN54X - I2C Read successful.....
2023:03:02-13:26:05.787  len =  33 > 40011E001A7E060201D002FFFF01FF000800000100020003008000820083008400
2023:03:02-13:26:05.787  PN54X - Posting read message.....
2023:03:02-13:26:05.787  read successful status = 0x0
2023:03:02-13:26:05.787  CORE_INIT_RSP NCI2.0 received !
2023:03:02-13:26:05.788  NfcAdaptation::HalDeviceContextDataCallback: len=33
2023:03:02-13:26:05.788  NFC received rsp gid:0
2023:03:02-13:26:05.788  nci_proc_core_rsp opcode:0x1
2023:03:02-13:26:05.788  scbr support: 0x1
2023:03:02-13:26:05.788  nfc_set_state 2 (CORE_INIT)->3 (W4_POST_INIT_CPLT)
2023:03:02-13:26:05.789  NfcAdaptation::HalCoreInitialized
2023:03:02-13:26:05.789  find found NXP_ACT_PROP_EXTN
2023:03:02-13:26:05.789  GetNxpByteArrayValue: NXP Config Parameter : NXP_ACT_PROP_EXTN
2023:03:02-13:26:05.789  PN54X - Read requested.....
2023:03:02-13:26:05.789  PN54X - Invoking I2C Read.....
2023:03:02-13:26:05.790  PN54X - Write requested.....
2023:03:02-13:26:05.790  PN54X - Invoking I2C Write.....
2023:03:02-13:26:05.791  len =   3 > 2F0200
2023:03:02-13:26:05.791  PN54X - I2C Write successful.....
2023:03:02-13:26:05.791  PN54X - Posting Fresh Write message.....
2023:03:02-13:26:05.791  PN54X - Tml Writer Thread Running................
2023:03:02-13:26:05.792  write successful status = 0x0
2023:03:02-13:26:05.792  Response timer started
2023:03:02-13:26:05.792  Waiting after ext cmd sent
2023:03:02-13:26:05.792  PN54X - I2C Read successful.....
2023:03:02-13:26:05.793  len =   8 > 4F0205000001C113
2023:03:02-13:26:05.793  PN54X - Posting read message.....
2023:03:02-13:26:05.793  read successful status = 0x0
2023:03:02-13:26:05.793  PN54X - Read requested.....
2023:03:02-13:26:05.793  PN54X - Invoking I2C Read.....
2023:03:02-13:26:05.794  Response timer stopped
2023:03:02-13:26:05.794  Checking response
2023:03:02-13:26:05.794  PN54X - Write requested.....
2023:03:02-13:26:05.794  PN54X - Invoking I2C Write.....
2023:03:02-13:26:05.796  len =   8 > 20020501A0070103
2023:03:02-13:26:05.796  PN54X - I2C Write successful.....
2023:03:02-13:26:05.796  PN54X - Posting Fresh Write message.....
2023:03:02-13:26:05.796  PN54X - Tml Writer Thread Running................
2023:03:02-13:26:05.797  write successful status = 0x0
2023:03:02-13:26:05.797  Response timer started
2023:03:02-13:26:05.797  Waiting after ext cmd sent
2023:03:02-13:26:05.797  PN54X - I2C Read successful.....
2023:03:02-13:26:05.798  len =   5 > 4002020000
2023:03:02-13:26:05.798  PN54X - Posting read message.....
2023:03:02-13:26:05.798  read successful status = 0x0
2023:03:02-13:26:05.798  phNxpNciHal_print_res_status: response status =STATUS_OK
2023:03:02-13:26:05.798  Response timer stopped
2023:03:02-13:26:05.799  Checking response
2023:03:02-13:26:05.799  PN54X - Read requested.....
2023:03:02-13:26:05.799  PN54X - Invoking I2C Read.....
2023:03:02-13:26:05.799  PN54X - Write requested.....
2023:03:02-13:26:05.800  PN54X - Invoking I2C Write.....
2023:03:02-13:26:05.801  len =   6 > 20030301A00F
2023:03:02-13:26:05.801  PN54X - I2C Write successful.....
2023:03:02-13:26:05.801  PN54X - Posting Fresh Write message.....
2023:03:02-13:26:05.801  PN54X - Tml Writer Thread Running................
2023:03:02-13:26:05.802  write successful status = 0x0
2023:03:02-13:26:05.802  Response timer started
2023:03:02-13:26:05.802  Waiting after ext cmd sent
2023:03:02-13:26:05.805  PN54X - I2C Read successful.....
2023:03:02-13:26:05.806  len =  40 > 4003250001A00F200503065001000100000000000000000000000000000000000000000000000000
2023:03:02-13:26:05.806  PN54X - Posting read message.....
2023:03:02-13:26:05.806  read successful status = 0x0
2023:03:02-13:26:05.806  phNxpNciHal_print_res_status: response status =STATUS_OK
2023:03:02-13:26:05.807  Response timer stopped
2023:03:02-13:26:05.807  Checking response
2023:03:02-13:26:05.807  find found NXP_SYS_CLK_SRC_SEL=(0x1)
2023:03:02-13:26:05.807  GetNxpNumValue: NXP Config Parameter : NXP_SYS_CLK_SRC_SEL=(0x1)
2023:03:02-13:26:05.807  find found NXP_SYS_CLK_FREQ_SEL=(0x2)
2023:03:02-13:26:05.808  GetNxpNumValue: NXP Config Parameter : NXP_SYS_CLK_FREQ_SEL=(0x2)
2023:03:02-13:26:05.808  find found NXP_SYS_CLOCK_TO_CFG=(0x6)
2023:03:02-13:26:05.808  GetNxpNumValue: NXP Config Parameter : NXP_SYS_CLOCK_TO_CFG=(0x6)
2023:03:02-13:26:05.808  gphNxpNciHal_fw_IoctlCtx.bClkSrcVal = 0x1
2023:03:02-13:26:05.808  gphNxpNciHal_fw_IoctlCtx.bClkFreqVal = 0x2
2023:03:02-13:26:05.809  gphNxpNciHal_fw_IoctlCtx.bTimeout = 0x6
2023:03:02-13:26:05.809  PN54X - Read requested.....
2023:03:02-13:26:05.809  PN54X - Invoking I2C Read.....
2023:03:02-13:26:05.809  PN54X - Write requested.....
2023:03:02-13:26:05.809  PN54X - Invoking I2C Write.....
2023:03:02-13:26:05.811  len =  10 > 20030703A002A003A004
2023:03:02-13:26:05.811  PN54X - I2C Write successful.....
2023:03:02-13:26:05.811  PN54X - Posting Fresh Write message.....
2023:03:02-13:26:05.811  PN54X - Tml Writer Thread Running................
2023:03:02-13:26:05.812  write successful status = 0x0
2023:03:02-13:26:05.812  Response timer started
2023:03:02-13:26:05.812  Waiting after ext cmd sent
2023:03:02-13:26:05.814  PN54X - I2C Read successful.....
2023:03:02-13:26:05.814  len =  17 > 40030E0003A0020101A0030108A0040101
2023:03:02-13:26:05.814  PN54X - Posting read message.....
2023:03:02-13:26:05.814  read successful status = 0x0
2023:03:02-13:26:05.815  phNxpNciHal_print_res_status: response status =STATUS_OK
2023:03:02-13:26:05.815  Response timer stopped
2023:03:02-13:26:05.815  Checking response
2023:03:02-13:26:05.815  PN54X - Read requested.....
2023:03:02-13:26:05.815  PN54X - Invoking I2C Read.....
2023:03:02-13:26:05.816  PN54X - Write requested.....
2023:03:02-13:26:05.816  PN54X - Invoking I2C Write.....
2023:03:02-13:26:05.817  len =   8 > 20020501A0030108
2023:03:02-13:26:05.817  PN54X - I2C Write successful.....
2023:03:02-13:26:05.817  PN54X - Posting Fresh Write message.....
2023:03:02-13:26:05.818  PN54X - Tml Writer Thread Running................
2023:03:02-13:26:05.818  write successful status = 0x0
2023:03:02-13:26:05.818  Response timer started
2023:03:02-13:26:05.819  Waiting after ext cmd sent
2023:03:02-13:26:05.819  PN54X - I2C Read successful.....
2023:03:02-13:26:05.819  len =   5 > 4002020000
2023:03:02-13:26:05.819  PN54X - Posting read message.....
2023:03:02-13:26:05.819  read successful status = 0x0
2023:03:02-13:26:05.820  phNxpNciHal_print_res_status: response status =STATUS_OK
2023:03:02-13:26:05.820  Response timer stopped
2023:03:02-13:26:05.820  Checking response
2023:03:02-13:26:05.820  find found NXP_NFC_PROFILE_EXTN
2023:03:02-13:26:05.821  GetNxpByteArrayValue: NXP Config Parameter : NXP_NFC_PROFILE_EXTN
2023:03:02-13:26:05.821  PN54X - Read requested.....
2023:03:02-13:26:05.821  PN54X - Invoking I2C Read.....
2023:03:02-13:26:05.821  PN54X - Write requested.....
2023:03:02-13:26:05.822  PN54X - Invoking I2C Write.....
2023:03:02-13:26:05.823  len =   8 > 20020501A0440100
2023:03:02-13:26:05.823  PN54X - I2C Write successful.....
2023:03:02-13:26:05.823  PN54X - Posting Fresh Write message.....
2023:03:02-13:26:05.823  PN54X - Tml Writer Thread Running................
2023:03:02-13:26:05.823  write successful status = 0x0
2023:03:02-13:26:05.824  Response timer started
2023:03:02-13:26:05.824  Waiting after ext cmd sent
2023:03:02-13:26:05.824  PN54X - I2C Read successful.....
2023:03:02-13:26:05.824  len =   5 > 4002020000
2023:03:02-13:26:05.825  PN54X - Posting read message.....
2023:03:02-13:26:05.825  read successful status = 0x0
2023:03:02-13:26:05.825  phNxpNciHal_print_res_status: response status =STATUS_OK
2023:03:02-13:26:05.825  Response timer stopped
2023:03:02-13:26:05.825  Checking response
2023:03:02-13:26:05.826  PN54X - Read requested.....
2023:03:02-13:26:05.826  PN54X - Invoking I2C Read.....
2023:03:02-13:26:05.826  Performing NAME_NXP_CORE_CONF Settings
2023:03:02-13:26:05.826  find found NXP_CORE_CONF
2023:03:02-13:26:05.827  GetNxpByteArrayValue: NXP Config Parameter : NXP_CORE_CONF
2023:03:02-13:26:05.827  NAME_NXP_CORE_CONF Settings Found - 1 Len: 52
2023:03:02-13:26:05.827  PN54X - Write requested.....
2023:03:02-13:26:05.827  PN54X - Invoking I2C Write.....
2023:03:02-13:26:05.833  len =  52 > 2002310F8501012801002101003001083101033201603801013304010203045401065001025B010080010181010182010E180101
2023:03:02-13:26:05.833  PN54X - I2C Write successful.....
2023:03:02-13:26:05.833  PN54X - Posting Fresh Write message.....
2023:03:02-13:26:05.833  PN54X - Tml Writer Thread Running................
2023:03:02-13:26:05.833  write successful status = 0x0
2023:03:02-13:26:05.833  Response timer started
2023:03:02-13:26:05.834  Waiting after ext cmd sent
2023:03:02-13:26:05.847  PN54X - I2C Read successful.....
2023:03:02-13:26:05.848  len =   5 > 4002020000
2023:03:02-13:26:05.848  PN54X - Posting read message.....
2023:03:02-13:26:05.849  read successful status = 0x0
2023:03:02-13:26:05.849  phNxpNciHal_print_res_status: response status =STATUS_OK
2023:03:02-13:26:05.850  Response timer stopped
2023:03:02-13:26:05.850  Checking response
2023:03:02-13:26:05.851  PN54X - Read requested.....
2023:03:02-13:26:05.852  PN54X - Invoking I2C Read.....
2023:03:02-13:26:05.852  NfcAdaptation::HalDeviceContextCallback: event=2
2023:03:02-13:26:05.852  nfc_main_hal_cback event: HAL_NFC_POST_INIT_CPLT_EVT(0x2), status=0
2023:03:02-13:26:05.853  HAL event=0x2
2023:03:02-13:26:05.854  nfc_set_state 3 (W4_POST_INIT_CPLT)->4 (IDLE)
2023:03:02-13:26:05.854  nfc_set_conn_id conn_id:0, handle:1
2023:03:02-13:26:05.855  nfc_set_conn_id conn_id:1, handle:2
2023:03:02-13:26:05.855  hci num_buf=1 buf_size=255
2023:03:02-13:26:05.855  nci_interfaces supported by NFCC: 0xf
2023:03:02-13:26:05.856  [0]: intf_type:2 intf_mask: 0x4 is_supported:1
2023:03:02-13:26:05.856  [1]: intf_type:3 intf_mask: 0x8 is_supported:1
2023:03:02-13:26:05.857  NfcAdaptation::HalWrite
2023:03:02-13:26:05.857  Going through extns - Adding Mifare in RF Discovery
2023:03:02-13:26:05.857  Going through extns - Adding Mifare in RF Discovery - END
2023:03:02-13:26:05.858  PN54X - Write requested.....
2023:03:02-13:26:05.858  PN54X - Invoking I2C Write.....
2023:03:02-13:26:05.860  len =  13 > 21000A03040302050303800180
2023:03:02-13:26:05.860  PN54X - I2C Write successful.....
2023:03:02-13:26:05.861  PN54X - Posting Fresh Write message.....
2023:03:02-13:26:05.861  PN54X - Tml Writer Thread Running................
2023:03:02-13:26:05.861  write successful status = 0x0
2023:03:02-13:26:05.861  NFC_ENABLE_REVT(0x5000)
2023:03:02-13:26:05.862  NfcAdaptation::HalPowerCycle
2023:03:02-13:26:05.862  nfa_sys: enabling subsystems
2023:03:02-13:26:05.862  nfa_ee_sys_enable
2023:03:02-13:26:05.862  nfa_sys_ptim_start_timer 0x7f7fe439e0
2023:03:02-13:26:05.863  ptim timer start
2023:03:02-13:26:05.863  enable_cplt_flags=0x8, enable_cplt_mask=0x27c
2023:03:02-13:26:05.864  enable_cplt_flags=0x18, enable_cplt_mask=0x27c
2023:03:02-13:26:05.864  enable_cplt_flags=0x38, enable_cplt_mask=0x27c
2023:03:02-13:26:05.864  enable_cplt_flags=0x78, enable_cplt_mask=0x27c
2023:03:02-13:26:05.864  nfa_t4tnfcee_sys_enable ()
2023:03:02-13:26:05.867  PN54X - I2C Read successful.....
2023:03:02-13:26:05.868  len =   4 > 41000100
2023:03:02-13:26:05.868  PN54X - Posting read message.....
2023:03:02-13:26:05.868  read successful status = 0x0
2023:03:02-13:26:05.868  NfcAdaptation::HalDeviceContextDataCallback: len=4
2023:03:02-13:26:05.869  NFC received rsp gid:1
2023:03:02-13:26:05.869  NfcAdaptation::HalWrite
2023:03:02-13:26:05.869  PN54X - Read requested.....
2023:03:02-13:26:05.870  PN54X - Invoking I2C Read.....
2023:03:02-13:26:05.870  PN54X - Write requested.....
2023:03:02-13:26:05.870  PN54X - Invoking I2C Write.....
2023:03:02-13:26:05.871  len =   3 > 220000
2023:03:02-13:26:05.872  PN54X - I2C Write successful.....
2023:03:02-13:26:05.872  PN54X - Posting Fresh Write message.....
2023:03:02-13:26:05.872  PN54X - Tml Writer Thread Running................
2023:03:02-13:26:05.873  write successful status = 0x0
2023:03:02-13:26:05.873  PN54X - I2C Read successful.....
2023:03:02-13:26:05.873  len =   5 > 4200020001
2023:03:02-13:26:05.873  PN54X - Posting read message.....
2023:03:02-13:26:05.874  read successful status = 0x0
2023:03:02-13:26:05.874  NfcAdaptation::HalDeviceContextDataCallback: len=5
2023:03:02-13:26:05.874  NFC received rsp gid:2
2023:03:02-13:26:05.875  nci_proc_ee_management_rsp opcode:0x0
2023:03:02-13:26:05.875  NFC_NFCEE_DISCOVER_REVT(0x5004)
2023:03:02-13:26:05.875  nfa_ee_proc_evt: event=0x5004 int_event:0x211
2023:03:02-13:26:05.876  Event NCI_DISC_RSP(0x211), State: INIT(0)
2023:03:02-13:26:05.876  em_state:0 cur_ee:0, num_nfcee:1
2023:03:02-13:26:05.876  em_state:0 num_ee_expecting:1 notify_enable_done:0
2023:03:02-13:26:05.876  em_state:0 cur_ee:0 num_ee_expecting:1
2023:03:02-13:26:05.877  PN54X - Read requested.....
2023:03:02-13:26:05.877  PN54X - Invoking I2C Read.....
2023:03:02-13:26:05.879  PN54X - I2C Read successful.....
2023:03:02-13:26:05.880  len =  17 > 62000E10010100010406880000003B0101
2023:03:02-13:26:05.880  PN54X - Posting read message.....
2023:03:02-13:26:05.880  read successful status = 0x0
2023:03:02-13:26:05.881  NfcAdaptation::HalDeviceContextDataCallback: len=17
2023:03:02-13:26:05.881  NFC received ntf gid:2
2023:03:02-13:26:05.881  nci_proc_ee_management_ntf opcode:0x0
2023:03:02-13:26:05.881  nfcee_id: 0x10 num_interface:0x1/0x1, num_tlvs:0x1
2023:03:02-13:26:05.882  tag:0x4, len:0x6
2023:03:02-13:26:05.882  NFC_NFCEE_INFO_REVT(0x5005)
2023:03:02-13:26:05.882  nfa_ee_proc_evt: event=0x5005 int_event:0x212
2023:03:02-13:26:05.883  Event NCI_DISC_NTF(0x212), State: INIT(0)
2023:03:02-13:26:05.883  em_state:0 ee_flags:0x0 cur_ee:0 num_ee_expecting:1
2023:03:02-13:26:05.883  nfa_ee_nci_disc_ntf cur_ee:1
2023:03:02-13:26:05.883  nfa_t4tnfcee_info_cback event: 0
2023:03:02-13:26:05.883  NfcAdaptation::HalWrite
2023:03:02-13:26:05.884  PN54X - Read requested.....
2023:03:02-13:26:05.884  PN54X - Invoking I2C Read.....
2023:03:02-13:26:05.884  PN54X - Write requested.....
2023:03:02-13:26:05.885  PN54X - Invoking I2C Write.....
2023:03:02-13:26:05.886  len =   5 > 2201021001
2023:03:02-13:26:05.886  PN54X - I2C Write successful.....
2023:03:02-13:26:05.886  PN54X - Posting Fresh Write message.....
2023:03:02-13:26:05.886  PN54X - Tml Writer Thread Running................
2023:03:02-13:26:05.886  write successful status = 0x0
2023:03:02-13:26:05.887  em_state:1 num_ee_expecting:0 notify_enable_done:1
2023:03:02-13:26:05.887  enable_cplt_flags=0x7c, enable_cplt_mask=0x27c
2023:03:02-13:26:05.887  nfa_sys_ptim_stop_timer 0x7f7fe439e0
2023:03:02-13:26:05.887  ptim timer stop
2023:03:02-13:26:05.888  Event NFA_EE_DISCV_TIMEOUT_EVT(0x21a), State: INIT_DONE(1)
2023:03:02-13:26:05.888  ptim timer stop
2023:03:02-13:26:05.888  PN54X - I2C Read successful.....
2023:03:02-13:26:05.888  len =   4 > 42010100
2023:03:02-13:26:05.888  PN54X - Posting read message.....
2023:03:02-13:26:05.888  read successful status = 0x0
2023:03:02-13:26:05.889  NfcAdaptation::HalDeviceContextDataCallback: len=4
2023:03:02-13:26:05.889  NFC received rsp gid:2
2023:03:02-13:26:05.889  nci_proc_ee_management_rsp opcode:0x1
2023:03:02-13:26:05.889  PN54X - Read requested.....
2023:03:02-13:26:05.890  PN54X - Invoking I2C Read.....
2023:03:02-13:26:05.891  PN54X - I2C Read successful.....
2023:03:02-13:26:05.891  len =   4 > 62010100
2023:03:02-13:26:05.891  PN54X - Posting read message.....
2023:03:02-13:26:05.892  read successful status = 0x0
2023:03:02-13:26:05.892  NfcAdaptation::HalDeviceContextDataCallback: len=4
2023:03:02-13:26:05.892  NFC received ntf gid:2
2023:03:02-13:26:05.892  nci_proc_ee_management_ntf opcode:0x1
2023:03:02-13:26:05.892  NFC_NFCEE_MODE_SET_REVT(0x5006)
2023:03:02-13:26:05.893  nfa_ee_proc_evt: event=0x5006 int_event:0x213
2023:03:02-13:26:05.893  Event NCI_MODE_SET(0x213), State: INIT_DONE(1)
2023:03:02-13:26:05.893  nfa_ee_nci_mode_set_rsp handle:0x10 mode:1
2023:03:02-13:26:05.893  nfa_ee_find_ecb
2023:03:02-13:26:05.893  nfa_ee_nci_mode_set_rsp p_rsp->status:0x00
2023:03:02-13:26:05.894  status:0 ecb_flags  :0x00 ee_cfged:0x00 ee_status:0
2023:03:02-13:26:05.894  nfa_t4tnfcee_info_cback event: 3
2023:03:02-13:26:05.894  flags:0x21
2023:03:02-13:26:05.894  nfa_ee_report_discover_req_evt DM is not active
2023:03:02-13:26:05.894  PN54X - Read requested.....
2023:03:02-13:26:05.895  PN54X - Invoking I2C Read.....
2023:03:02-13:26:05.897  PN54X - I2C Read successful.....
2023:03:02-13:26:05.897  len =  14 > 610A0B0200031080040003108104
2023:03:02-13:26:05.897  PN54X - Posting read message.....
2023:03:02-13:26:05.897  read successful status = 0x0
2023:03:02-13:26:05.898  NfcAdaptation::HalDeviceContextDataCallback: len=14
2023:03:02-13:26:05.898  NFC received ntf gid:1
2023:03:02-13:26:05.898  nfc_ncif_proc_ee_discover_req 2 len:11
2023:03:02-13:26:05.898  NFC_EE_DISCOVER_REQ_REVT(0x5009)
2023:03:02-13:26:05.898  flags:0x21
2023:03:02-13:26:05.899  nfa_ee_proc_evt: event=0x5009 int_event:0x217
2023:03:02-13:26:05.899  Event NCI_DISC_REQ(0x217), State: INIT_DONE(1)
2023:03:02-13:26:05.899  num_info: 2 cur_ee:1
2023:03:02-13:26:05.899  nfa_ee_find_ecb
2023:03:02-13:26:05.899  nfa_t4tnfcee_info_cback event: 13
2023:03:02-13:26:05.900  enable_cplt_flags=0x27c, enable_cplt_mask=0x27c
2023:03:02-13:26:05.900  nfaDeviceManagementCallback: enter; event=0x0
2023:03:02-13:26:05.900  nfaDeviceManagementCallback: NFA_DM_ENABLE_EVT; status=0x0
2023:03:02-13:26:05.900  PN54X - Read requested.....
2023:03:02-13:26:05.901  PN54X - Invoking I2C Read.....
2023:03:02-13:26:05.901  em_state:1 num_ee_expecting:0 notify_enable_done:1
2023:03:02-13:26:05.902  enable_cplt_flags=0x27c, enable_cplt_mask=0x27c
2023:03:02-13:26:05.902  nfcee_id=0x10 ee_status=0x0 ecb_flags=0x40 la_protocol=0x4 la_protocol=0x0 la_protocol=0x0
2023:03:02-13:26:05.902  nfa_ee_find_ecb
2023:03:02-13:26:05.903  nfa_t4tnfcee_info_cback event: 13
2023:03:02-13:26:05.903  nfcee_id=0x10 ee_status=0x0 ecb_flags=0x40 la_protocol=0x4 la_protocol=0x4 la_protocol=0x0
2023:03:02-13:26:05.903  flags:0x1
2023:03:02-13:26:05.903  [1] ee_handle:0x10, listen protocol A:4, B:4, F:0, BP:0
2023:03:02-13:26:05.904  RoutingManager::RoutingManager(): Active SE for Nfc-F is 0x00
2023:03:02-13:26:05.904  RoutingManager::RoutingManager(): default route is 0x00
2023:03:02-13:26:05.904  RoutingManager::initialize()
2023:03:02-13:26:05.904  : try ee register
2023:03:02-13:26:05.905  NFA_EeRegister
2023:03:02-13:26:05.905  NFA got event 0x0201
2023:03:02-13:26:05.905  Event API_REGISTER(0x201), State: INIT_DONE(1)
2023:03:02-13:26:05.905  max_aid_cfg_length: 660 and max_aid_entries: 133
2023:03:02-13:26:05.905  RoutingManager::nfaEeCallback: NFA_EE_REGISTER_EVT; status=0
2023:03:02-13:26:05.906  [1] ee_handle:0x10, listen protocol A:4, B:4, F:0, BP:0
2023:03:02-13:26:05.906  nfaEeCallback: NFA_EE_DISCOVER_REQ_EVT; status=0x0; num ee=1
2023:03:02-13:26:05.906  0x3
2023:03:02-13:26:05.906  NFA_CeRegisterAidOnDH
2023:03:02-13:26:05.906  NFA_EeAddSystemCodeRouting(): handle:<0xc0>
2023:03:02-13:26:05.907  nfa_ee_find_ecb
2023:03:02-13:26:05.907  Bad ee_handle or System Code
2023:03:02-13:26:05.907  RoutingManager::updateDefaultRoute
2023:03:02-13:26:05.907  : Fail to register system code
2023:03:02-13:26:05.908  NFA got event 0x0603
2023:03:02-13:26:05.908  nfa_ce_handle_event event: NFA_CE_API_CFG_ISODEP_TECH_EVT (0x603), flags: 00000000
2023:03:02-13:26:05.908  NFA got event 0x0601
2023:03:02-13:26:05.908  nfa_ce_handle_event event: NFA_CE_API_REG_LISTEN_EVT (0x601), flags: 00000000
2023:03:02-13:26:05.908  Registering UICC/Felica/Type-4 tag listener. Type=0
2023:03:02-13:26:05.909  NFA_CE: adding listen_info entry 1
2023:03:02-13:26:05.909  registering callback for wildcard AID
2023:03:02-13:26:05.909  handle 0x04 registered (for wildcard AID)
2023:03:02-13:26:05.909  disc_mask=0x140000
2023:03:02-13:26:05.909  nfa_ce_api_reg_listen: registered handle 0x0301
2023:03:02-13:26:05.910  RoutingManager::stackCallback: event=0x15
2023:03:02-13:26:05.910  RoutingManager::stackCallback: NFA_CE_REGISTERED_EVT; status=0x0; h=0x301
2023:03:02-13:26:05.910  handle:<0x0>clear protocol_mask:<0x8>
2023:03:02-13:26:05.910  nfa_ee_find_ecb
2023:03:02-13:26:05.911  handle:<0x0>protocol_mask:<0x8>/<0x0>/<0x0><0x8><0x0><0x0>
2023:03:02-13:26:05.911  nfa_ee_find_ecb
2023:03:02-13:26:05.911  RoutingManager::updateDefaultProtocolRoute
2023:03:02-13:26:05.911  : Succeed to register default ISO-DEP route
2023:03:02-13:26:05.911  handle:<0x0>protocol_mask:<0x4>/<0x0>/<0x0><0x0><0x0><0x0>
2023:03:02-13:26:05.912  NFA got event 0x0207
2023:03:02-13:26:05.912  Event API_CLEAR_PROTO_CFG(0x207), State: INIT_DONE(1)
2023:03:02-13:26:05.912  RoutingManager::nfaEeCallback: NFA_EE_CLEAR_PROTO_CFG_EVT; status=0x0
2023:03:02-13:26:05.912  nfa_ee_find_ecb
2023:03:02-13:26:05.913  NFA got event 0x0206
2023:03:02-13:26:05.913  Event API_SET_PROTO_CFG(0x206), State: INIT_DONE(1)
2023:03:02-13:26:05.913  nfa_ee_update_route_size nfcee_id:0x0 size_mask_proto:10 size_mask_tech:0
2023:03:02-13:26:05.913  nfa_ee_total_lmrt_size size:10
2023:03:02-13:26:05.913  RoutingManager::nfaEeCallback: NFA_EE_SET_PROTO_CFG_EVT; status=0x0
2023:03:02-13:26:05.914  NFA got event 0x0206
2023:03:02-13:26:05.914  Event API_SET_PROTO_CFG(0x206), State: INIT_DONE(1)
2023:03:02-13:26:05.914  nfa_ee_update_route_size nfcee_id:0x0 size_mask_proto:15 size_mask_tech:0
2023:03:02-13:26:05.914  nfa_ee_total_lmrt_size size:15
2023:03:02-13:26:05.914  RoutingManager::nfaEeCallback: NFA_EE_SET_PROTO_CFG_EVT; status=0x0
2023:03:02-13:26:05.915  nativeNfcTag_registerNdefTypeHandler
2023:03:02-13:26:05.915  handle whole ndef message: 1, tnf=0xff
2023:03:02-13:26:05.915  NfcTag::resetTechnologies
2023:03:02-13:26:05.915  find found PRESENCE_CHECK_ALGORITHM=(0x2)
2023:03:02-13:26:05.916  GetNxpNumValue: NXP Config Parameter : PRESENCE_CHECK_ALGORITHM=(0x2)
2023:03:02-13:26:05.916  PeerToPeer::initialize
2023:03:02-13:26:05.916  nfcManager_doInitialize: NAME_POLLING_TECH_MASK mask=0xCF
2023:03:02-13:26:05.916  NFA got event 0x0115
2023:03:02-13:26:05.916  event: NFA_DM_API_REG_NDEF_HDLR_EVT (0x15)
2023:03:02-13:26:05.917  Default NDEF handler successfully registered.
2023:03:02-13:26:05.917  NDEF handler successfully registered. Handle=0x00000200
2023:03:02-13:26:05.917  ndefHandlerCallback: event=0, eventData=0x7f7e070600
2023:03:02-13:26:05.917  ndefHandlerCallback: NFA_NDEF_REGISTER_EVT; status=0x0; h=0x200
2023:03:02-13:26:05.917  nfcManager_doInitialize: tag polling tech mask=0xCF
2023:03:02-13:26:05.918  nfcManager_doInitialize: @@P2P listen tech mask=0xC5
2023:03:02-13:26:05.918  NFA_SetRfDiscoveryDuration
2023:03:02-13:26:05.918  num_ids: 1
2023:03:02-13:26:05.918  NFA got event 0x0110
2023:03:02-13:26:05.919  event: NFA_DM_API_SET_RF_DISC_DURATION_EVT (0x10)
2023:03:02-13:26:05.919  NFA got event 0x0103
2023:03:02-13:26:05.919  event: NFA_DM_API_GET_CONFIG_EVT (0x03)
2023:03:02-13:26:05.919  NfcAdaptation::HalWrite
2023:03:02-13:26:05.919  PN54X - Write requested.....
2023:03:02-13:26:05.919  PN54X - Invoking I2C Write.....
2023:03:02-13:26:05.920  len =   5 > 2003020152
2023:03:02-13:26:05.920  PN54X - I2C Write successful.....
2023:03:02-13:26:05.921  PN54X - Posting Fresh Write message.....
2023:03:02-13:26:05.921  PN54X - Tml Writer Thread Running................
2023:03:02-13:26:05.921  write successful status = 0x0
2023:03:02-13:26:05.922  PN54X - I2C Read successful.....
2023:03:02-13:26:05.922  len =   8 > 4003050001520104
2023:03:02-13:26:05.922  PN54X - Posting read message.....
2023:03:02-13:26:05.922  read successful status = 0x0
2023:03:02-13:26:05.922  phNxpNciHal_print_res_status: response status =STATUS_OK
2023:03:02-13:26:05.923  NfcAdaptation::HalDeviceContextDataCallback: len=8
2023:03:02-13:26:05.923  NFC received rsp gid:0
2023:03:02-13:26:05.923  nci_proc_core_rsp opcode:0x3
2023:03:02-13:26:05.924  NFC_GET_CONFIG_REVT(0x5003)
2023:03:02-13:26:05.924  nfaDeviceManagementCallback: enter; event=0x3
2023:03:02-13:26:05.924  nfaDeviceManagementCallback: NFA_DM_GET_CONFIG_EVT
2023:03:02-13:26:05.924  PN54X - Read requested.....
2023:03:02-13:26:05.925  PN54X - Invoking I2C Read.....
2023:03:02-13:26:05.925  nfcManager_doInitialize: lfT3tMax=4
2023:03:02-13:26:05.925  param_id:0x85
2023:03:02-13:26:05.925  nfcManager_doInitialize: exit
2023:03:02-13:26:05.926  nativeNfcSnep_registerClientCallback:
2023:03:02-13:26:05.926  Nfc: NFA_SnepRegisterClient () Entry....
2023:03:02-13:26:05.926  Nfc: NFA_SnepRegisterClient () p_cback is not NULL
2023:03:02-13:26:05.926  Nfc: NFA_SnepRegisterClient () GKI_getbuf is Success
2023:03:02-13:26:05.927  Nfc: NFA_SnepRegisterClient ()creturn NFA_STATUS_OK
2023:03:02-13:26:05.927  NFA got event 0x0102
2023:03:02-13:26:05.927  event: NFA_DM_API_SET_CONFIG_EVT (0x02)
2023:03:02-13:26:05.927  nfa_dm_check_set_config
2023:03:02-13:26:05.927  NfcAdaptation::HalWrite
2023:03:02-13:26:05.928  PN54X - Write requested.....
2023:03:02-13:26:05.928  PN54X - Invoking I2C Write.....
2023:03:02-13:26:05.929  len =   7 > 20020401850101
2023:03:02-13:26:05.929  PN54X - I2C Write successful.....
2023:03:02-13:26:05.930  PN54X - Posting Fresh Write message.....
2023:03:02-13:26:05.930  PN54X - Tml Writer Thread Running................
2023:03:02-13:26:05.930  write successful status = 0x0
2023:03:02-13:26:05.930  NFA got event 0x0403
2023:03:02-13:26:05.931  Nfc: nfa_snep_evt_hdlr(): Event 0x403
2023:03:02-13:26:05.931  Nfc: nfa_snep_reg_client ()
2023:03:02-13:26:05.931  link_type = 0x2
2023:03:02-13:26:05.931  Registered SAP = 0x20
2023:03:02-13:26:05.931  PN54X - I2C Read successful.....
2023:03:02-13:26:05.931  len =   5 > 4002020000
2023:03:02-13:26:05.932  PN54X - Posting read message.....
2023:03:02-13:26:05.932  nfaSnepClientCallback: snepEvent= 0
2023:03:02-13:26:05.932  nfaSnepClientCallback: NFA_SNEP_REG_EVT; Status: 0x0000
2023:03:02-13:26:05.932  nfaSnepClientCallback: NFA_SNEP_REG_EVT; Client Register Handle: 0x0700
2023:03:02-13:26:05.932  read successful status = 0x0
2023:03:02-13:26:05.933  phNxpNciHal_print_res_status: response status =STATUS_OK
2023:03:02-13:26:05.933  NfcAdaptation::HalDeviceContextDataCallback: len=5
2023:03:02-13:26:05.933  nfcManager_enableDiscovery: enter; tech_mask = ff
2023:03:02-13:26:05.933  nfcManager_enableDiscovery: enter; tech_mask = cf
2023:03:02-13:26:05.933  nfcManager_enableDiscovery: enter; tech_mask = cf
2023:03:02-13:26:05.934  nativeNfcTag_acquireRfInterfaceMutexLock: try to acquire lock
2023:03:02-13:26:05.934  nativeNfcTag_acquireRfInterfaceMutexLock: sRfInterfaceMutex lock
2023:03:02-13:26:05.934  stopPolling_rfDiscoveryDisabled: disable polling
2023:03:02-13:26:05.934  NFA_DisablePolling
2023:03:02-13:26:05.935  PN54X - Read requested.....
2023:03:02-13:26:05.935  PN54X - Invoking I2C Read.....
2023:03:02-13:26:05.935  NFC received rsp gid:0
2023:03:02-13:26:05.935  nci_proc_core_rsp opcode:0x2
2023:03:02-13:26:05.935  NFC_SET_CONFIG_REVT(0x5002)
2023:03:02-13:26:05.936  nfaDeviceManagementCallback: enter; event=0x2
2023:03:02-13:26:05.936  nfaDeviceManagementCallback: NFA_DM_SET_CONFIG_EVT
2023:03:02-13:26:05.936  NFA got event 0x0107
2023:03:02-13:26:05.936  event: NFA_DM_API_DISABLE_POLLING_EVT (0x07)
2023:03:02-13:26:05.936  nfa_dm_act_disable_polling
2023:03:02-13:26:05.937  nfaConnectionCallback: event= 1
2023:03:02-13:26:05.937  nfaConnectionCallback: NFA_POLL_DISABLED_EVT: status = 3
2023:03:02-13:26:05.937  nativeNfcTag_releaseRfInterfaceMutexLock: sRfInterfaceMutex unlock
2023:03:02-13:26:05.937  nativeNfcTag_acquireRfInterfaceMutexLock: try to acquire lock
2023:03:02-13:26:05.937  nativeNfcTag_acquireRfInterfaceMutexLock: sRfInterfaceMutex lock
2023:03:02-13:26:05.938  startPolling_rfDiscoveryDisabled: enable polling
2023:03:02-13:26:05.938  0xCF
2023:03:02-13:26:05.938  startPolling_rfDiscoveryDisabled: wait for enable event
2023:03:02-13:26:05.938  NFA got event 0x0106
2023:03:02-13:26:05.938  event: NFA_DM_API_ENABLE_POLLING_EVT (0x06)
2023:03:02-13:26:05.939  nfa_dm_act_enable_polling
2023:03:02-13:26:05.939  nfa_dm_start_polling
2023:03:02-13:26:05.939  disc_mask=0x697f
2023:03:02-13:26:05.939  nfaConnectionCallback: event= 0
2023:03:02-13:26:05.939  nfaConnectionCallback: NFA_POLL_ENABLED_EVT: status = 0
2023:03:02-13:26:05.939  nativeNfcTag_releaseRfInterfaceMutexLock: sRfInterfaceMutex unlock
2023:03:02-13:26:05.940  nfcManager_enableDiscovery: Enable p2pListening
2023:03:02-13:26:05.940  PeerToPeer::enableP2pListening: enter isEnable: 1  mIsP2pListening: 0
2023:03:02-13:26:05.940  tech_mask:0xC5
2023:03:02-13:26:05.940  NFA got event 0x010D
2023:03:02-13:26:05.940  event: NFA_DM_API_SET_P2P_LISTEN_TECH_EVT (0x0d)
2023:03:02-13:26:05.940  tech_mask = 197
2023:03:02-13:26:05.941  tech_mask = 0xc5
2023:03:02-13:26:05.941  nfaConnectionCallback: event= 33
2023:03:02-13:26:05.941  nfaConnectionCallback: NFA_SET_P2P_LISTEN_TECH_EVT
2023:03:02-13:26:05.941  PeerToPeer::enableP2pListening: exit; mIsP2pListening: 1
2023:03:02-13:26:05.941  NFA_ResumeP2p
2023:03:02-13:26:05.942  RoutingManager::addAidRouting
2023:03:02-13:26:05.942  : enter
2023:03:02-13:26:05.942  handle:<0x10>
2023:03:02-13:26:05.943  NFA got event 0x010B
2023:03:02-13:26:05.943  event: NFA_DM_API_RESUME_P2P_EVT (0x0b)
2023:03:02-13:26:05.943  nfa_dm_act_resume_p2p
2023:03:02-13:26:05.943  nfaConnectionCallback: event= 39
2023:03:02-13:26:05.943  nfaConnectionCallback: unknown event ????
2023:03:02-13:26:05.944  nfa_ee_find_ecb
2023:03:02-13:26:05.944  aid:<d276>
2023:03:02-13:26:05.944  NFA got event 0x0208
2023:03:02-13:26:05.944  Event API_ADD_AID(0x208), State: INIT_DONE(1)
2023:03:02-13:26:05.945  nfa_ee_api_add_aid id:0x10 len=7 aid:d2 76 00 00 85 01 01
2023:03:02-13:26:05.945  nfa_ee_total_lmrt_size size:15
2023:03:02-13:26:05.945  nfa_ee_update_route_aid_size nfcee_id:0x10 size_aid:11
2023:03:02-13:26:05.945  status:0 ee_cfged:0x21
2023:03:02-13:26:05.945  nfa_t4tnfcee_info_cback event: 4
2023:03:02-13:26:05.946  RoutingManager::nfaEeCallback: NFA_EE_ADD_AID_EVT  status=0
2023:03:02-13:26:05.946  RoutingManager::addAidRouting
2023:03:02-13:26:05.946  : routed AID
2023:03:02-13:26:05.946  handle:<0x0>protocol_mask:<0x0>/<0x0>/<0x0><0x0><0x0><0x0>
2023:03:02-13:26:05.946  nfa_ee_find_ecb
2023:03:02-13:26:05.947  NFA got event 0x0206
2023:03:02-13:26:05.947  Event API_SET_PROTO_CFG(0x206), State: INIT_DONE(1)
2023:03:02-13:26:05.947  nfa_ee_update_route_size nfcee_id:0x0 size_mask_proto:15 size_mask_tech:0
2023:03:02-13:26:05.947  nfa_ee_total_lmrt_size size:26
2023:03:02-13:26:05.947  RoutingManager::nfaEeCallback: NFA_EE_SET_PROTO_CFG_EVT; status=0x0
2023:03:02-13:26:05.948  RoutingManager::commitRouting
2023:03:02-13:26:05.948  NFA_EeUpdateNow
2023:03:02-13:26:05.948  NFA got event 0x020D
2023:03:02-13:26:05.948  Event API_UPDATE_NOW(0x20d), State: INIT_DONE(1)
2023:03:02-13:26:05.948  nfa_sys_ptim_stop_timer 0x7f7fe439b0
2023:03:02-13:26:05.949  ptim timer stop
2023:03:02-13:26:05.949  nfa_ee_rout_timeout
2023:03:02-13:26:05.949  ee_cfged: 0xa1 ee_cfg_sts: 0x00
2023:03:02-13:26:05.949  0: ecb_flags  : 0x04, mask: 0x20
2023:03:02-13:26:05.949  nfa_ee_update_rout ee_cfg_sts:0x00
2023:03:02-13:26:05.950  Event CFG_TO_NFCC(0x21b), State: INIT_DONE(1)
2023:03:02-13:26:05.950  t4tNfceePower not found; taking default value
2023:03:02-13:26:05.950  last_active: 0x10
2023:03:02-13:26:05.950  nfa_ee_lmrt_to_nfcc --add the routing for NFCEEs!!
2023:03:02-13:26:05.950  nfa_ee_route_add_one_ecb_by_route_order - max_len:720, cur_offset:0, more:1, num_tlv:0,rout_type:- 1
2023:03:02-13:26:05.951  nfa_ee_add_aid_route_to_ecb -  p_cb->aid_info2
2023:03:02-13:26:05.951  nfa_ee_total_lmrt_size size:26
2023:03:02-13:26:05.951  ee_cfg_sts:0x01 lmrt_size:26
2023:03:02-13:26:05.951  nfa_ee_lmrt_to_nfcc --add the routing for DH!!
2023:03:02-13:26:05.951  nfa_ee_route_add_one_ecb_by_route_order - max_len:720, cur_offset:11, more:1, num_tlv:1,rout_type:- 1
2023:03:02-13:26:05.952  nfa_ee_add_aid_route_to_ecb - No AID entries available
2023:03:02-13:26:05.952  nfa_ee_total_lmrt_size size:26
2023:03:02-13:26:05.952  ee_cfg_sts:0x01 lmrt_size:26
2023:03:02-13:26:05.952  nfa_ee_lmrt_to_nfcc --add the routing for NFCEEs!!
2023:03:02-13:26:05.952  nfa_ee_route_add_one_ecb_by_route_order - max_len:720, cur_offset:11, more:1, num_tlv:1,rout_type:- 2
2023:03:02-13:26:05.953  nfa_ee_route_add_one_ecb_by_route_order -  Route type - NA:- 2
2023:03:02-13:26:05.953  nfa_ee_total_lmrt_size size:26
2023:03:02-13:26:05.953  ee_cfg_sts:0x01 lmrt_size:26
2023:03:02-13:26:05.953  nfa_ee_lmrt_to_nfcc --add the routing for DH!!
2023:03:02-13:26:05.953  nfa_ee_route_add_one_ecb_by_route_order - max_len:720, cur_offset:11, more:1, num_tlv:1,rout_type:- 2
2023:03:02-13:26:05.954  nfa_ee_route_add_one_ecb_by_route_order -  Route type - NA:- 2
2023:03:02-13:26:05.954  nfa_ee_total_lmrt_size size:26
2023:03:02-13:26:05.954  ee_cfg_sts:0x01 lmrt_size:26
2023:03:02-13:26:05.954  nfa_ee_lmrt_to_nfcc --add the routing for NFCEEs!!
2023:03:02-13:26:05.954  nfa_ee_route_add_one_ecb_by_route_order - max_len:720, cur_offset:11, more:1, num_tlv:1,rout_type:- 3
2023:03:02-13:26:05.955  nfa_ee_add_sys_code_route_to_ecb - No SC entries available
2023:03:02-13:26:05.955  nfa_ee_total_lmrt_size size:26
2023:03:02-13:26:05.955  ee_cfg_sts:0x01 lmrt_size:26
2023:03:02-13:26:05.955  nfa_ee_lmrt_to_nfcc --add the routing for DH!!
2023:03:02-13:26:05.955  nfa_ee_route_add_one_ecb_by_route_order - max_len:720, cur_offset:11, more:1, num_tlv:1,rout_type:- 3
2023:03:02-13:26:05.955  nfa_ee_add_sys_code_route_to_ecb - No SC entries available
2023:03:02-13:26:05.956  nfa_ee_total_lmrt_size size:26
2023:03:02-13:26:05.956  ee_cfg_sts:0x01 lmrt_size:26
2023:03:02-13:26:05.956  nfa_ee_lmrt_to_nfcc --add the routing for NFCEEs!!
2023:03:02-13:26:05.956  nfa_ee_route_add_one_ecb_by_route_order - max_len:720, cur_offset:11, more:1, num_tlv:1,rout_type:- 4
2023:03:02-13:26:05.956  nfa_ee_total_lmrt_size size:26
2023:03:02-13:26:05.957  ee_cfg_sts:0x01 lmrt_size:26
2023:03:02-13:26:05.957  nfa_ee_lmrt_to_nfcc --add the routing for DH!!
2023:03:02-13:26:05.957  nfa_ee_route_add_one_ecb_by_route_order - max_len:720, cur_offset:11, more:1, num_tlv:1,rout_type:- 4
2023:03:02-13:26:05.957  nfa_ee_add_proto_route_to_ecb - NFC DEP added for DH!!!
2023:03:02-13:26:05.957  nfa_ee_total_lmrt_size size:26
2023:03:02-13:26:05.958  ee_cfg_sts:0x01 lmrt_size:26
2023:03:02-13:26:05.958  nfa_ee_lmrt_to_nfcc --add the routing for NFCEEs!!
2023:03:02-13:26:05.958  nfa_ee_route_add_one_ecb_by_route_order - max_len:720, cur_offset:26, more:1, num_tlv:4,rout_type:- 5
2023:03:02-13:26:05.958  nfa_ee_total_lmrt_size size:26
2023:03:02-13:26:05.958  ee_cfg_sts:0x01 lmrt_size:26
2023:03:02-13:26:05.959  nfa_ee_lmrt_to_nfcc --add the routing for DH!!
2023:03:02-13:26:05.959  nfa_ee_route_add_one_ecb_by_route_order - max_len:720, cur_offset:26, more:0, num_tlv:4,rout_type:- 5
2023:03:02-13:26:05.959  nfa_ee_total_lmrt_size size:26
2023:03:02-13:26:05.959  ee_cfg_sts:0x01 lmrt_size:26
2023:03:02-13:26:05.959  nfa_ee_route_add_one_ecb_by_route_order : set routing num_tlv:4 tlv_size:26
2023:03:02-13:26:05.959  NfcAdaptation::HalWrite
2023:03:02-13:26:05.960  PN54X - Write requested.....
2023:03:02-13:26:05.960  PN54X - Invoking I2C Write.....
2023:03:02-13:26:05.963  len =  31 > 21011C000402091039D2760000850101010300010301030011040103000105
2023:03:02-13:26:05.963  PN54X - I2C Write successful.....
2023:03:02-13:26:05.964  PN54X - Posting Fresh Write message.....
2023:03:02-13:26:05.964  PN54X - Tml Writer Thread Running................
2023:03:02-13:26:05.964  write successful status = 0x0
2023:03:02-13:26:05.964  nfa_ee_update_rout ee_cfg_sts:0x10 ee_cfged:0x21
2023:03:02-13:26:05.965  PN54X - I2C Read successful.....
2023:03:02-13:26:05.965  len =   4 > 41010100
2023:03:02-13:26:05.965  PN54X - Posting read message.....
2023:03:02-13:26:05.965  read successful status = 0x0
2023:03:02-13:26:05.965  NfcAdaptation::HalDeviceContextDataCallback: len=4
2023:03:02-13:26:05.966  PN54X - Read requested.....
2023:03:02-13:26:05.966  PN54X - Invoking I2C Read.....
2023:03:02-13:26:05.966  NFC received rsp gid:1
2023:03:02-13:26:05.966  NFC_SET_ROUTING_REVT(0x500a)
2023:03:02-13:26:05.966  nfa_ee_proc_evt: event=0x500a int_event:0x218
2023:03:02-13:26:05.966  Event NCI_WAIT_RSP(0x218), State: INIT_DONE(1)
2023:03:02-13:26:05.967  ee_wait_evt:0x30 wait_rsp:1
2023:03:02-13:26:05.967  nfa_ee_report_update_evt ee_wait_evt:0x30 wait_rsp:0
2023:03:02-13:26:05.967  RoutingManager::nfaEeCallback: NFA_EE_UPDATED_EVT
2023:03:02-13:26:05.967  startRfDiscovery: is start=1
2023:03:02-13:26:05.967  nativeNfcTag_acquireRfInterfaceMutexLock: try to acquire lock
2023:03:02-13:26:05.968  nativeNfcTag_acquireRfInterfaceMutexLock: sRfInterfaceMutex lock
2023:03:02-13:26:05.968  NFA_StartRfDiscovery
2023:03:02-13:26:05.968  NFA got event 0x010E
2023:03:02-13:26:05.968  event: NFA_DM_API_START_RF_DISCOVERY_EVT (0x0e)
2023:03:02-13:26:05.968  nfa_dm_act_start_rf_discovery
2023:03:02-13:26:05.968  nfa_dm_start_rf_discover
2023:03:02-13:26:05.969  1
2023:03:02-13:26:05.969  0x0, 0x0, 0x0, 0x0
2023:03:02-13:26:05.969  nfa_dm_cb.disc_cb.entry[0].selected_disc_mask = 0x140000
2023:03:02-13:26:05.969  nfa_dm_cb.disc_cb.entry[1].selected_disc_mask = 0x697f
2023:03:02-13:26:05.969  nfa_p2p_set_config
2023:03:02-13:26:05.970  LLCP_GetDiscoveryConfig
2023:03:02-13:26:05.970  nfa_dm_check_set_config
2023:03:02-13:26:05.970  NfcAdaptation::HalWrite
2023:03:02-13:26:05.970  PN54X - Write requested.....
2023:03:02-13:26:05.970  PN54X - Invoking I2C Write.....
2023:03:02-13:26:05.973  len =  26 > 20021701291446666D010112020207FF03020003040164070103
2023:03:02-13:26:05.973  PN54X - I2C Write successful.....
2023:03:02-13:26:05.974  PN54X - Posting Fresh Write message.....
2023:03:02-13:26:05.974  PN54X - Tml Writer Thread Running................
2023:03:02-13:26:05.974  write successful status = 0x0
2023:03:02-13:26:05.974  dm_disc_mask = 0x14697f
2023:03:02-13:26:05.974  tech_proto_mask = 0x0014697F
2023:03:02-13:26:05.975  nfa_dm_check_set_config
2023:03:02-13:26:05.975  nfa_dm_set_total_duration
2023:03:02-13:26:05.975  nfa_dm_check_set_config
2023:03:02-13:26:05.975  NFC_DiscoveryStart
2023:03:02-13:26:05.975  NFC_DiscoveryStart status: 0xe3
2023:03:02-13:26:05.975  PN54X - I2C Read successful.....
2023:03:02-13:26:05.976  len =   5 > 4002020000
2023:03:02-13:26:05.976  PN54X - Posting read message.....
2023:03:02-13:26:05.976  read successful status = 0x0
2023:03:02-13:26:05.976  phNxpNciHal_print_res_status: response status =STATUS_OK
2023:03:02-13:26:05.976  NfcAdaptation::HalDeviceContextDataCallback: len=5
2023:03:02-13:26:05.977  NFC received rsp gid:0
2023:03:02-13:26:05.977  nci_proc_core_rsp opcode:0x2
2023:03:02-13:26:05.977  NFC_SET_CONFIG_REVT(0x5002)
2023:03:02-13:26:05.977  NfcAdaptation::HalWrite
2023:03:02-13:26:05.978  PN54X - Read requested.....
2023:03:02-13:26:05.978  PN54X - Invoking I2C Read.....
2023:03:02-13:26:05.978  PN54X - Write requested.....
2023:03:02-13:26:05.978  PN54X - Invoking I2C Write.....
2023:03:02-13:26:05.981  len =  19 > 20021005300104310100320120380101500100
2023:03:02-13:26:05.981  PN54X - I2C Write successful.....
2023:03:02-13:26:05.981  PN54X - Posting Fresh Write message.....
2023:03:02-13:26:05.981  PN54X - Tml Writer Thread Running................
2023:03:02-13:26:05.981  write successful status = 0x0
2023:03:02-13:26:05.994  PN54X - I2C Read successful.....
2023:03:02-13:26:05.994  len =   5 > 4002020000
2023:03:02-13:26:05.995  PN54X - Posting read message.....
2023:03:02-13:26:05.995  read successful status = 0x0
2023:03:02-13:26:05.995  phNxpNciHal_print_res_status: response status =STATUS_OK
2023:03:02-13:26:05.995  NfcAdaptation::HalDeviceContextDataCallback: len=5
2023:03:02-13:26:05.995  PN54X - Read requested.....
2023:03:02-13:26:05.996  PN54X - Invoking I2C Read.....
2023:03:02-13:26:05.996  NFC received rsp gid:0
2023:03:02-13:26:05.996  nci_proc_core_rsp opcode:0x2
2023:03:02-13:26:05.996  NFC_SET_CONFIG_REVT(0x5002)
2023:03:02-13:26:05.997  NfcAdaptation::HalWrite
2023:03:02-13:26:05.997  PN54X - Write requested.....
2023:03:02-13:26:05.997  PN54X - Invoking I2C Write.....
2023:03:02-13:26:05.999  len =   8 > 200205010002F401
2023:03:02-13:26:05.999  PN54X - I2C Write successful.....
2023:03:02-13:26:05.999  PN54X - Posting Fresh Write message.....
2023:03:02-13:26:05.999  PN54X - Tml Writer Thread Running................
2023:03:02-13:26:06.000  write successful status = 0x0
2023:03:02-13:26:06.000  PN54X - I2C Read successful.....
2023:03:02-13:26:06.000  len =   5 > 4002020000
2023:03:02-13:26:06.000  PN54X - Posting read message.....
2023:03:02-13:26:06.001  read successful status = 0x0
2023:03:02-13:26:06.001  phNxpNciHal_print_res_status: response status =STATUS_OK
2023:03:02-13:26:06.001  NfcAdaptation::HalDeviceContextDataCallback: len=5
2023:03:02-13:26:06.001  NFC received rsp gid:0
2023:03:02-13:26:06.002  nci_proc_core_rsp opcode:0x2
2023:03:02-13:26:06.002  NFC_SET_CONFIG_REVT(0x5002)
2023:03:02-13:26:06.002  NfcAdaptation::HalPrediscover
2023:03:02-13:26:06.002  NfcAdaptation::HalWrite
2023:03:02-13:26:06.003  > Polling Loop Started
2023:03:02-13:26:06.003  PN54X - Read requested.....
2023:03:02-13:26:06.004  PN54X - Invoking I2C Read.....
2023:03:02-13:26:06.004  PN54X - Write requested.....
2023:03:02-13:26:06.005  PN54X - Invoking I2C Write.....
2023:03:02-13:26:06.007  len =  18 > 21030F070001010102010301800181010601
2023:03:02-13:26:06.007  PN54X - I2C Write successful.....
2023:03:02-13:26:06.007  PN54X - Posting Fresh Write message.....
2023:03:02-13:26:06.008  PN54X - Tml Writer Thread Running................
2023:03:02-13:26:06.008  write successful status = 0x0
2023:03:02-13:26:06.010  PN54X - I2C Read successful.....
2023:03:02-13:26:06.010  len =   4 > 41030100
2023:03:02-13:26:06.011  PN54X - Posting read message.....
2023:03:02-13:26:06.011  read successful status = 0x0
2023:03:02-13:26:06.012  NfcAdaptation::HalDeviceContextDataCallback: len=4
2023:03:02-13:26:06.012  PN54X - Read requested.....
2023:03:02-13:26:06.012  PN54X - Invoking I2C Read.....
2023:03:02-13:26:06.013  NFC received rsp gid:1
2023:03:02-13:26:06.013  p2p priority is running under bail out mode ONLY.
2023:03:02-13:26:06.013  event:0x4000
2023:03:02-13:26:06.013  state: IDLE (0), event: DISCOVER_RSP(1) disc_flags: 0x31
2023:03:02-13:26:06.014  old_state: IDLE (0), new_state: DISCOVERY (1) disc_flags: 0x11
2023:03:02-13:26:06.014  event:0x00
2023:03:02-13:26:06.014  nfa_ce_handle_disc_start (status=0x0)
2023:03:02-13:26:06.015  event:0x00
2023:03:02-13:26:06.015  nfa_dm_disc_notify_started
2023:03:02-13:26:06.015  nfaConnectionCallback: event= 30
2023:03:02-13:26:06.015  nfaConnectionCallback: NFA_RF_DISCOVERY_STARTED_EVT: status = 0
2023:03:02-13:26:06.016  new state: DISCOVERY (1), disc_flags: 0x1
2023:03:02-13:26:06.016  nativeNfcTag_releaseRfInterfaceMutexLock: sRfInterfaceMutex unlock
2023:03:02-13:26:06.016  nfcManager_enableDiscovery: exit
2023:03:02-13:26:06.016  nativeNfcSnep_startServer:
2023:03:02-13:26:06.017  startRfDiscovery: is start=0
2023:03:02-13:26:06.017  nativeNfcTag_acquireRfInterfaceMutexLock: try to acquire lock
2023:03:02-13:26:06.017  nativeNfcTag_acquireRfInterfaceMutexLock: sRfInterfaceMutex lock
2023:03:02-13:26:06.018  NFA_StopRfDiscovery
2023:03:02-13:26:06.018  NFA got event 0x010F
2023:03:02-13:26:06.018  event: NFA_DM_API_STOP_RF_DISCOVERY_EVT (0x0f)
2023:03:02-13:26:06.019  nfa_dm_act_stop_rf_discovery
2023:03:02-13:26:06.019  deactivate_type:0x0
2023:03:02-13:26:06.019  state: DISCOVERY (1), event: DEACTIVATE_CMD(6) disc_flags: 0x2
2023:03:02-13:26:06.020  NFC_Deactivate 4 (IDLE) deactivate_type:0
2023:03:02-13:26:06.020  NfcAdaptation::HalWrite
2023:03:02-13:26:06.020  PN54X - Write requested.....
2023:03:02-13:26:06.021  PN54X - Invoking I2C Write.....
2023:03:02-13:26:06.022  len =   4 > 21060100
2023:03:02-13:26:06.022  PN54X - I2C Write successful.....
2023:03:02-13:26:06.023  PN54X - Posting Fresh Write message.....
2023:03:02-13:26:06.023  PN54X - Tml Writer Thread Running................
2023:03:02-13:26:06.024  write successful status = 0x0
2023:03:02-13:26:06.024  new state: DISCOVERY (1), disc_flags: 0x22
2023:03:02-13:26:06.024  nfa_sys_ptim_stop_timer 0x7f7fe422a8
2023:03:02-13:26:06.025  ptim timer stop
2023:03:02-13:26:06.025  Stopped presence check timer (if started)
2023:03:02-13:26:06.037  PN54X - I2C Read successful.....
2023:03:02-13:26:06.037  len =   4 > 41060100
2023:03:02-13:26:06.037  PN54X - Posting read message.....
2023:03:02-13:26:06.037  read successful status = 0x0
2023:03:02-13:26:06.038  NfcAdaptation::HalDeviceContextDataCallback: len=4
2023:03:02-13:26:06.038  NFC received rsp gid:1
2023:03:02-13:26:06.039  p2p priority is running under bail out mode ONLY.
2023:03:02-13:26:06.039  nfc_set_state 4 (IDLE)->4 (IDLE)
2023:03:02-13:26:06.039  nfa_dm_disc_data_cback
2023:03:02-13:26:06.039  event:0x4005
2023:03:02-13:26:06.040  state: DISCOVERY (1), event: DEACTIVATE_RSP(7) disc_flags: 0x22
2023:03:02-13:26:06.040  old_state: DISCOVERY (1), new_state: IDLE (0) disc_flags: 0x2
2023:03:02-13:26:06.040  nfaConnectionCallback: event= 31
2023:03:02-13:26:06.041  nfaConnectionCallback: NFA_RF_DISCOVERY_STOPPED_EVT: status = 0
2023:03:02-13:26:06.041  PN54X - Read requested.....
2023:03:02-13:26:06.041  PN54X - Invoking I2C Read.....
2023:03:02-13:26:06.042  nfa_dm_start_rf_discover
2023:03:02-13:26:06.042  new state: IDLE (0), disc_flags: 0x0
2023:03:02-13:26:06.042  nativeNfcTag_releaseRfInterfaceMutexLock: sRfInterfaceMutex unlock
2023:03:02-13:26:06.043  Nfc: NFA_SnepRegisterServer (): SAP:0x4, SN:<urn:nfc:sn:snep>
2023:03:02-13:26:06.044  NFA got event 0x0402
2023:03:02-13:26:06.044  Nfc: nfa_snep_evt_hdlr(): Event 0x402
2023:03:02-13:26:06.045  Nfc: nfa_snep_reg_server ()
2023:03:02-13:26:06.045  SAP:0x4, link_type:0x2, ServiceName:<urn:nfc:sn:snep>
2023:03:02-13:26:06.046  Registered SAP = 0x04
2023:03:02-13:26:06.046  sys_id = 4, update_wks = 1
2023:03:02-13:26:06.046  disc_mask=0x4480000
2023:03:02-13:26:06.047  nfaSnepServerCallback: Function Entry  snepEvent: 0x0
2023:03:02-13:26:06.047  nfaSnepServerCallback: NFA_SNEP_REG_EVT; Status: 0x0000
2023:03:02-13:26:06.047  nfaSnepServerCallback: NFA_SNEP_REG_EVT; Server Register Handle: 0x0701
2023:03:02-13:26:06.048  snepServerThread: enter
2023:03:02-13:26:06.049  startRfDiscovery: is start=1
2023:03:02-13:26:06.049  nativeNfcTag_acquireRfInterfaceMutexLock: try to acquire lock
2023:03:02-13:26:06.050  nativeNfcTag_acquireRfInterfaceMutexLock: sRfInterfaceMutex lock
2023:03:02-13:26:06.050  NFA_StartRfDiscovery
2023:03:02-13:26:06.050  NFA got event 0x010E
2023:03:02-13:26:06.051  event: NFA_DM_API_START_RF_DISCOVERY_EVT (0x0e)
2023:03:02-13:26:06.051  nfa_dm_act_start_rf_discovery
2023:03:02-13:26:06.051  nfa_dm_start_rf_discover
2023:03:02-13:26:06.051  1
2023:03:02-13:26:06.052  0x0, 0x0, 0x0, 0x0
2023:03:02-13:26:06.052  nfa_dm_cb.disc_cb.entry[0].selected_disc_mask = 0x140000
2023:03:02-13:26:06.052  nfa_dm_cb.disc_cb.entry[1].selected_disc_mask = 0x697f
2023:03:02-13:26:06.052  nfa_dm_cb.disc_cb.entry[2].selected_disc_mask = 0x4480000
2023:03:02-13:26:06.053  nfa_p2p_set_config
2023:03:02-13:26:06.053  LLCP_GetDiscoveryConfig
2023:03:02-13:26:06.053  nfa_dm_check_set_config
2023:03:02-13:26:06.053  NfcAdaptation::HalWrite
2023:03:02-13:26:06.054  PN54X - Write requested.....
2023:03:02-13:26:06.054  PN54X - Invoking I2C Write.....
2023:03:02-13:26:06.057  len =  26 > 20021701291446666D010112020207FF03020013040164070103
2023:03:02-13:26:06.058  PN54X - I2C Write successful.....
2023:03:02-13:26:06.058  PN54X - Posting Fresh Write message.....
2023:03:02-13:26:06.058  PN54X - Tml Writer Thread Running................
2023:03:02-13:26:06.058  write successful status = 0x0
2023:03:02-13:26:06.059  nfa_dm_check_set_config
2023:03:02-13:26:06.059  dm_disc_mask = 0x45c697f
2023:03:02-13:26:06.059  tech_proto_mask = 0x045C697F
2023:03:02-13:26:06.060  nfa_dm_check_set_config
2023:03:02-13:26:06.060  nfa_dm_set_total_duration
2023:03:02-13:26:06.060  nfa_dm_check_set_config
2023:03:02-13:26:06.060  NFC_DiscoveryStart
2023:03:02-13:26:06.061  NFC_DiscoveryStart status: 0xe3
2023:03:02-13:26:06.061  PN54X - I2C Read successful.....
2023:03:02-13:26:06.062  len =   5 > 4002020000
2023:03:02-13:26:06.062  PN54X - Posting read message.....
2023:03:02-13:26:06.062  read successful status = 0x0
2023:03:02-13:26:06.063  phNxpNciHal_print_res_status: response status =STATUS_OK
2023:03:02-13:26:06.063  NfcAdaptation::HalDeviceContextDataCallback: len=5
2023:03:02-13:26:06.064  NFC received rsp gid:0
2023:03:02-13:26:06.064  nci_proc_core_rsp opcode:0x2
2023:03:02-13:26:06.064  NFC_SET_CONFIG_REVT(0x5002)
2023:03:02-13:26:06.065  NfcAdaptation::HalWrite
2023:03:02-13:26:06.065  PN54X - Read requested.....
2023:03:02-13:26:06.065  PN54X - Invoking I2C Read.....
2023:03:02-13:26:06.066  PN54X - Write requested.....
2023:03:02-13:26:06.066  PN54X - Invoking I2C Write.....
2023:03:02-13:26:06.070  len =  29 > 20021A02611446666D010112020207FF03020013040164070103600108
2023:03:02-13:26:06.070  PN54X - I2C Write successful.....
2023:03:02-13:26:06.070  PN54X - Posting Fresh Write message.....
2023:03:02-13:26:06.070  PN54X - Tml Writer Thread Running................
2023:03:02-13:26:06.070  write successful status = 0x0
2023:03:02-13:26:06.071  PN54X - I2C Read successful.....
2023:03:02-13:26:06.071  len =   5 > 4002020000
2023:03:02-13:26:06.071  PN54X - Posting read message.....
2023:03:02-13:26:06.072  read successful status = 0x0
2023:03:02-13:26:06.072  phNxpNciHal_print_res_status: response status =STATUS_OK
2023:03:02-13:26:06.072  NfcAdaptation::HalDeviceContextDataCallback: len=5
2023:03:02-13:26:06.072  NFC received rsp gid:0
2023:03:02-13:26:06.073  nci_proc_core_rsp opcode:0x2
2023:03:02-13:26:06.073  NFC_SET_CONFIG_REVT(0x5002)
2023:03:02-13:26:06.073  NfcAdaptation::HalWrite
2023:03:02-13:26:06.073  PN54X - Read requested.....
2023:03:02-13:26:06.073  PN54X - Invoking I2C Read.....
2023:03:02-13:26:06.074  PN54X - Write requested.....
2023:03:02-13:26:06.074  PN54X - Invoking I2C Write.....
2023:03:02-13:26:06.075  len =  10 > 20020702320160500102
2023:03:02-13:26:06.076  PN54X - I2C Write successful.....
2023:03:02-13:26:06.076  PN54X - Posting Fresh Write message.....
2023:03:02-13:26:06.076  PN54X - Tml Writer Thread Running................
2023:03:02-13:26:06.076  write successful status = 0x0
2023:03:02-13:26:06.083  PN54X - I2C Read successful.....
2023:03:02-13:26:06.084  len =   5 > 4002020000
2023:03:02-13:26:06.084  PN54X - Posting read message.....
2023:03:02-13:26:06.084  read successful status = 0x0
2023:03:02-13:26:06.085  phNxpNciHal_print_res_status: response status =STATUS_OK
2023:03:02-13:26:06.085  NfcAdaptation::HalDeviceContextDataCallback: len=5
2023:03:02-13:26:06.086  NFC received rsp gid:0
2023:03:02-13:26:06.086  nci_proc_core_rsp opcode:0x2
2023:03:02-13:26:06.086  NFC_SET_CONFIG_REVT(0x5002)
2023:03:02-13:26:06.087  NfcAdaptation::HalPrediscover
2023:03:02-13:26:06.087  NfcAdaptation::HalWrite
2023:03:02-13:26:06.087  > Polling Loop Started
2023:03:02-13:26:06.087  PN54X - Read requested.....
2023:03:02-13:26:06.087  PN54X - Invoking I2C Read.....
2023:03:02-13:26:06.088  PN54X - Write requested.....
2023:03:02-13:26:06.088  PN54X - Invoking I2C Write.....
2023:03:02-13:26:06.091  len =  22 > 21031309000101010201030180018101820183010601
2023:03:02-13:26:06.091  PN54X - I2C Write successful.....
2023:03:02-13:26:06.091  PN54X - Posting Fresh Write message.....
2023:03:02-13:26:06.091  PN54X - Tml Writer Thread Running................
2023:03:02-13:26:06.091  write successful status = 0x0
2023:03:02-13:26:06.093  PN54X - I2C Read successful.....
2023:03:02-13:26:06.093  len =   4 > 41030100
2023:03:02-13:26:06.093  PN54X - Posting read message.....
2023:03:02-13:26:06.093  read successful status = 0x0
2023:03:02-13:26:06.094  NfcAdaptation::HalDeviceContextDataCallback: len=4
2023:03:02-13:26:06.094  NFC received rsp gid:1
2023:03:02-13:26:06.094  p2p priority is running under bail out mode ONLY.
2023:03:02-13:26:06.094  event:0x4000
2023:03:02-13:26:06.095  state: IDLE (0), event: DISCOVER_RSP(1) disc_flags: 0x31
2023:03:02-13:26:06.095  old_state: IDLE (0), new_state: DISCOVERY (1) disc_flags: 0x11
2023:03:02-13:26:06.095  event:0x00
2023:03:02-13:26:06.095  nfa_dm_disc_notify_started
2023:03:02-13:26:06.095  PN54X - Read requested.....
2023:03:02-13:26:06.096  PN54X - Invoking I2C Read.....
2023:03:02-13:26:06.096  nfaConnectionCallback: event= 30
2023:03:02-13:26:06.096  nfaConnectionCallback: NFA_RF_DISCOVERY_STARTED_EVT: status = 0
2023:03:02-13:26:06.096  new state: DISCOVERY (1), disc_flags: 0x1
2023:03:02-13:26:06.097  nativeNfcTag_releaseRfInterfaceMutexLock: sRfInterfaceMutex unlock
Waiting for a Tag/Device...