2024:03:05-11:44:30.387 NxpNciR: len = 5 > 4002020000 2024:03:05-11:44:30.387 NxpTml: PN54X - Posting read message..... 2024:03:05-11:44:30.387 NxpHal: hal_extns_write_rsp_timeout_cb - write timeout!!! 2024:03:05-11:44:30.388 NxpHal: read successful status = 0x0 2024:03:05-11:44:30.388 NxpHal: phNxpNciHal_print_res_status: response status =STATUS_OK 2024:03:05-11:44:30.388 NxpHal: Response timer stopped 2024:03:05-11:44:30.388 NxpHal: Callback Status is failed!! Timer Expired!! Couldn't read it! 0xff 2024:03:05-11:44:30.389 NxpHal: NXP Core configuration failed 2024:03:05-11:44:30.389 NxpTml: PN54X - Read requested..... 2024:03:05-11:44:30.389 NxpTml: PN54X - Invoking I2C Read..... [ 107.387700] python3.8[823]: Tue Mar 5 11:54:53 UTC 2024 2024:03:05-11:42:22.771 NxpHal: Force FW Download, NFCC not coming out from Standby 2024:03:05-11:42:22.772 NxpFunc: NfcAdaptation::HalDeviceContextCallback: event=6 2024:03:05-11:42:23.430 NxpTml: _i2c_read() [hdr] errno : 10 2024:03:05-11:42:23.430 NxpTml: PN54X - Error in I2C Read..... 2024:03:05-11:42:23.431 NxpTml: PN54X - Read requested..... 2024:03:05-11:42:23.431 NxpTml: PN54X - Invoking I2C Read..... 2024:03:05-11:42:23.430 NxpTml: _i2c_read() [hdr] errno : 10 2024:03:05-11:42:23.430 NxpTml: PN54X - Error in I2C Read..... 2024:03:05-11:42:23.431 NxpTml: PN54X - Read requested..... 2024:03:05-11:42:23.431 NxpTml: PN54X - Invoking I2C Read..... read in write = 0 [ 191.783514] sysrq: HELP : loglevel(0-9) reboot(b) crash(c) terminate-all-tasks(e) memory-full-oom-kill(f) kill-all-tasks(i) thaw-filesystems(j) sak(k) show-memory-usage(m) nice-all-RT-tasks(n) poweroff(o) show-registers(p) show-all-timers(q) unraw(r) sync(s) show-task-states(t) unmount(u) show-blocked-tasks(w) [ 195.628959] sysrq: This sysrq operation is disabled. [ 195.912800] sysrq: HELP : loglevel(0-9) reboot(b) crash(c) terminate-all-tasks(e) memory-full-oom-kill(f) kill-all-tasks(i) thaw-filesystems(j) sak(k) show-memory-usage(m) nice-all-RT-tasks(n) poweroff(o) show-registers(p) show-all-timers(q) unraw(r) sync(s) show-task-states(t) unmount(u) show-blocked-tasks(w) [ 16.536638] pn54x_dev_init [ 16.537055] pn54x_probe [ 16.537158] of_get_named_gpiod_flags: parsed 'enable-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@2a000/i2c@0/pn547@28[0]' - status (0) [ 16.537204] of_get_named_gpiod_flags: can't parse 'firmware-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@2a000/i2c@0/pn547@28[0]' [ 16.537233] pn544 1-0028: FIRM GPIO error getting from OF node [ 16.537291] of_get_named_gpiod_flags: parsed 'interrupt-gpios' property of node '/ocp/interconnect@48000000/segment@0/target-module@2a000/i2c@0/pn547@28[0]' - status (0) [ 16.537334] of_get_named_gpiod_flags: can't parse 'nxp,pn54x-clkreq' property of node '/ocp/interconnect@48000000/segment@0/target-module@2a000/i2c@0/pn547@28[0]' [ 16.537353] pn544 1-0028: CLKREQ GPIO error getting from OF node [ 16.537399] pn544 1-0028: 1-0028 supply nxp,pn54x-pvdd not found, using dummy regulator [ 16.537631] pn544 1-0028: 1-0028 supply nxp,pn54x-vbat not found, using dummy regulator [ 16.537771] pn544 1-0028: 1-0028 supply nxp,pn54x-pmuvcc not found, using dummy regulator [ 16.537952] pn544 1-0028: 1-0028 supply nxp,pn54x-sevdd not found, using dummy regulator [ 16.538070] pn54x_probe: request irq_gpio 20 [ 16.538285] pn54x_probe: request ven_gpio 26 [ 16.625355] pn54x_probe : requesting IRQ 60