ÿ U-Boot 2021.04-5.10.35-2.0.0+g3463140881 (Jun 08 2021 - 01:39:44 +0000) CPU: NXP i.MX8QXP RevC A35 at 1200 MHz at 25C Model: NXP i.MX8QXP MEK Board: iMX8QXP MEK Boot: SD1 DRAM: 3 GiB TCPC: Vendor ID [0x1fc9], Product ID [0x5110], Addr [I2C1 0x50] MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... *** Warning - bad CRC, using default environment [*]-Video Link 0it6263_i2c_reg_read, read err 3 faill to read from it6263 revision, ret 3 (1280 x 720) [0] dpu@56180000, video [1] lvds-channel@0, display [2] lvds-to-hdmi-bridge@4c, video_bridge In: serial Out: serial Err: serial BuildInfo: - SCFW 58865b98, SECO-FW 7aeb8423, IMX-MKIMAGE 5138add7, ATF ec35fef - U-Boot 2021.04-5.10.35-2.0.0+g3463140881 switch to partitions #0, OK mmc1 is current device flash target is MMC:1 Net: eth0: ethernet@5b040000 [PRIME] Warning: ethernet@5b050000 (eth1) using random MAC address - ae:d2:c0:47:6a:55 , eth1: ethernet@5b050000 Fastboot: Normal Normal Boot Hit any key to stop autoboot: 3 2 1 0 switch to partitions #0, OK mmc1 is current device Failed to load 'boot.scr' 29487616 bytes read in 401 ms (70.1 MiB/s) Booting from mmc ... 100412 bytes read in 3 ms (31.9 MiB/s) Moving Image from 0x80280000 to 0x80400000, end=820b0000 ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 0000000083000000, end 000000008301b83b Disable clock-controller@5a4d0000 rsrc 62 not owned Disable clock-controller@5ac90000 rsrc 102 not owned Disable clock-controller@585a0000 rsrc 411 not owned Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd042] [ 0.000000] Linux version 5.10.35-lts-5.10.y+gef3f2cfc6010 (oe-user@oe-host) (aarch64-poky-linux-gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.36.1.20210209) #1 SMP PREEMPT Tue Jun 8 14:42:10 UTC 2021 [ 0.000000] Machine model: Freescale i.MX8QXP MEK [ 0.000000] efi: UEFI not found. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'm4@0x88000000': base 0x0000000088000000, size 128 MiB [ 0.000000] OF: reserved mem: OVERLAP DETECTED! [ 0.000000] vdev0vring0@90000000 (0x0000000090000000--0x0000000090008000) overlaps with rsc_table@90000000 (0x0000000090000000--0x0000000090008000) [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000c0000000, size 960 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000090400000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vdevbuffer, compatible id shared-dma-pool [ 0.000000] earlycon: lpuart32 at MMIO32 0x000000005a060000 (options '') [ 0.000000] printk: bootconsole [lpuart32] enabled [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000080200000-0x00000008bfffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x8bf9b3700-0x8bf9b5fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080200000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x00000008bfffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080200000-0x0000000083ffffff] [ 0.000000] node 0: [mem 0x0000000084000000-0x00000000861fffff] [ 0.000000] node 0: [mem 0x0000000086200000-0x000000008fffffff] [ 0.000000] node 0: [mem 0x0000000090000000-0x000000009001ffff] [ 0.000000] node 0: [mem 0x0000000090020000-0x00000000900fefff] [ 0.000000] node 0: [mem 0x00000000900ff000-0x00000000900fffff] [ 0.000000] node 0: [mem 0x0000000090100000-0x00000000901fffff] [ 0.000000] node 0: [mem 0x0000000090200000-0x00000000904fffff] [ 0.000000] node 0: [mem 0x0000000090500000-0x0000000091ffffff] [ 0.000000] node 0: [mem 0x0000000092000000-0x0000000094bfffff] [ 0.000000] node 0: [mem 0x0000000094c00000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000880000000-0x00000008bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x00000008bfffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 23 pages/cpu s56280 r8192 d29736 u94208 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 773640 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: console=ttyLP0,115200 earlycon root=/dev/mmcblk1p2 rootwait rw [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000bc000000-0x00000000c0000000] (64MB) [ 0.000000] Memory: 1788976K/3143680K available (17536K kernel code, 1468K rwdata, 6780K rodata, 2880K init, 545K bss, 371664K reserved, 983040K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 512 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000051b00000 [ 0.000000] random: get_random_bytes called from start_kernel+0x330/0x4f4 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 8.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns [ 0.000005] sched_clock: 56 bits at 8MHz, resolution 125ns, wraps every 2199023255500ns [ 0.008666] Console: colour dummy device 80x25 [ 0.012851] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.00 BogoMIPS (lpj=32000) [ 0.023023] pid_max: default: 32768 minimum: 301 [ 0.027709] LSM: Security Framework initializing [ 0.032305] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.039630] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.049018] rcu: Hierarchical SRCU implementation. [ 0.056049] EFI services will not be available. [ 0.060544] smp: Bringing up secondary CPUs ... [ 0.065475] Detected VIPT I-cache on CPU1 [ 0.065509] GICv3: CPU1: found redistributor 1 region 0:0x0000000051b20000 [ 0.065563] CPU1: Booted secondary processor 0x0000000001 [0x410fd042] [ 0.066311] Detected VIPT I-cache on CPU2 [ 0.066336] GICv3: CPU2: found redistributor 2 region 0:0x0000000051b40000 [ 0.066368] CPU2: Booted secondary processor 0x0000000002 [0x410fd042] [ 0.067069] Detected VIPT I-cache on CPU3 [ 0.067092] GICv3: CPU3: found redistributor 3 region 0:0x0000000051b60000 [ 0.067122] CPU3: Booted secondary processor 0x0000000003 [0x410fd042] [ 0.067199] smp: Brought up 1 node, 4 CPUs [ 0.123097] SMP: Total of 4 processors activated. [ 0.127778] CPU features: detected: 32-bit EL0 Support [ 0.132922] CPU features: detected: CRC32 instructions [ 0.138032] CPU features: detected: 32-bit EL1 Support [ 0.152046] CPU: All CPU(s) started at EL2 [ 0.155851] alternatives: patching kernel code [ 0.161471] devtmpfs: initialized [ 0.180834] KASLR disabled due to lack of seed [ 0.185138] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.194687] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.238731] pinctrl core: initialized pinctrl subsystem [ 0.244357] DMI not present or invalid. [ 0.248395] NET: Registered protocol family 16 [ 0.262519] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.270756] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.279851] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.287516] audit: initializing netlink subsys (disabled) [ 0.293073] audit: type=2000 audit(0.208:1): state=initialized audit_enabled=0 res=1 [ 0.293818] thermal_sys: Registered thermal governor 'step_wise' [ 0.300562] thermal_sys: Registered thermal governor 'power_allocator' [ 0.307083] cpuidle: using governor menu [ 0.317464] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.324047] ASID allocator initialised with 65536 entries [ 0.331482] Serial: AMBA PL011 UART driver [ 0.335322] imx mu driver is registered. [ 0.339163] imx rpmsg driver is registered. [ 0.447366] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.453752] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.460430] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.467115] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.474983] cryptd: max_cpu_qlen set to 1000 [ 0.483903] ACPI: Interpreter disabled. [ 0.489940] iommu: Default domain type: Translated [ 0.494712] vgaarb: loaded [ 0.497525] SCSI subsystem initialized [ 0.501361] usbcore: registered new interface driver usbfs [ 0.506562] usbcore: registered new interface driver hub [ 0.511845] usbcore: registered new device driver usb [ 0.519521] mc: Linux media interface: v0.10 [ 0.523491] videodev: Linux video capture interface: v2.00 [ 0.529007] pps_core: LinuxPPS API ver. 1 registered [ 0.533878] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.543010] PTP clock support registered [ 0.547359] EDAC MC: Ver: 3.0.0 [ 0.552585] FPGA manager framework [ 0.555767] Advanced Linux Sound Architecture Driver Initialized. [ 0.562843] Bluetooth: Core ver 2.22 [ 0.566134] NET: Registered protocol family 31 [ 0.570517] Bluetooth: HCI device and connection manager initialized [ 0.576861] Bluetooth: HCI socket layer initialized [ 0.581724] Bluetooth: L2CAP socket layer initialized [ 0.586777] Bluetooth: SCO socket layer initialized [ 0.593461] imx-scu scu: NXP i.MX SCU Initialized [ 0.637227] random: fast init done [ 0.709479] imx8qxp-pinctrl scu:pinctrl: Invalid fsl,pins or pins property in node /scu/pinctrl/wifi_initgrp [ 0.719009] imx8qxp-pinctrl scu:pinctrl: initialized IMX pinctrl driver [ 0.751092] clocksource: Switched to clocksource arch_sys_counter [ 0.757138] VFS: Disk quotas dquot_6.6.0 [ 0.760833] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.768047] pnp: PnP ACPI: disabled [ 0.805651] NET: Registered protocol family 2 [ 0.810176] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.818481] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.826523] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.834083] TCP: Hash tables configured (established 32768 bind 32768) [ 0.840449] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.847054] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.854308] NET: Registered protocol family 1 [ 0.858871] RPC: Registered named UNIX socket transport module. [ 0.864484] RPC: Registered udp transport module. [ 0.869148] RPC: Registered tcp transport module. [ 0.873838] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.881107] PCI: CLS 0 bytes, default 64 [ 0.885476] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.895261] kvm [1]: IPA Size Limit: 40 bits [ 0.900999] kvm [1]: GICv3: no GICV resource entry [ 0.905455] kvm [1]: disabling GICv2 emulation [ 0.909899] kvm [1]: GIC system register CPU interface enabled [ 0.915794] kvm [1]: vgic interrupt IRQ9 [ 0.919749] kvm [1]: Hyp mode initialized successfully [ 0.929037] Initialise system trusted keyrings [ 0.933395] workingset: timestamp_bits=42 max_order=20 bucket_order=0 [ 0.946897] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.953160] NFS: Registering the id_resolver key type [ 0.957905] Key type id_resolver registered [ 0.962044] Key type id_legacy registered [ 0.966133] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.972732] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.980132] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.986638] 9p: Installing v9fs 9p2000 file system support [ 1.036672] Key type asymmetric registered [ 1.040436] Asymmetric key parser 'x509' registered [ 1.045330] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 1.052689] io scheduler mq-deadline registered [ 1.057196] io scheduler kyber registered [ 1.090177] pwm-backlight lvds_backlight@0: supply power not found, using dummy regulator [ 1.098494] pwm-backlight lvds_backlight@1: supply power not found, using dummy regulator [ 1.108000] EINJ: ACPI disabled. [ 1.211042] mxs-dma 5b810000.dma-apbh: initialized [ 1.222596] Bus freq driver module loaded [ 1.236089] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.248482] 5a060000.serial: ttyLP0 at MMIO 0x5a060010 (irq = 67, base_baud = 5000000) is a FSL_LPUAR[ 1.257663] printk: console [ttyLP0] enabled [ 1.257663] printk: console [ttyLP0] enabled [ 1.266092] printk: bootconsole [lpuart32] disabled [ 1.266092] printk: bootconsole [lpuart32] disabled [ 1.277057] 5a070000.serial: ttyLP1 at MMIO 0x5a070010 (irq = 68, base_baud = 5000000) is a FSL_LPUART [ 1.287591] 5a080000.serial: ttyLP2 at MMIO 0x5a080010 (irq = 69, base_baud = 5000000) is a FSL_LPUART [ 1.298104] 5a090000.serial: ttyLP3 at MMIO 0x5a090010 (irq = 70, base_baud = 5000000) is a FSL_LPUART [ 1.371432] nwl-dsi 56228000.dsi_host: [drm:nwl_dsi_probe] *ERROR* Failed to get device IRQ: -517 [ 1.380997] nwl-dsi 56248000.dsi_host: [drm:nwl_dsi_probe] *ERROR* Failed to get device IRQ: -517 [ 1.400135] loop: module loaded [ 1.405985] megasas: 07.714.04.00-rc1 [ 1.413918] imx ahci driver is registered. [ 1.430567] spi-nor spi0.0: mt35xu512aba (65536 Kbytes) [ 1.443174] libphy: Fixed MDIO Bus: probed [ 1.449744] tun: Universal TUN/TAP device driver, 1.6 [ 1.457704] thunder_xcv, ver 1.0 [ 1.461018] thunder_bgx, ver 1.0 [ 1.464300] nicpf, ver 1.0 [ 1.469405] pps pps0: new PPS source ptp0 [ 1.484355] libphy: fec_enet_mii_bus: probed [ 1.493700] fec 5b040000.ethernet eth0: registered PHC device 0 [ 1.506680] hclge is initializing [ 1.510098] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 1.517360] hns3: Copyright (c) 2017 Huawei Corporation. [ 1.522791] e1000: Intel(R) PRO/1000 Network Driver [ 1.527687] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.533523] e1000e: Intel(R) PRO/1000 Network Driver [ 1.538504] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.544480] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.549893] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.555511] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 1.561790] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.568392] sky2: driver version 1.30 [ 1.574368] VFIO - User Level meta-driver version: 0.3 [ 1.592896] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.599491] ehci-pci: EHCI PCI platform driver [ 1.604039] ehci-platform: EHCI generic platform driver [ 1.610194] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.616432] ohci-pci: OHCI PCI platform driver [ 1.620949] ohci-platform: OHCI generic platform driver [ 1.629271] usbcore: registered new interface driver uas [ 1.634664] usbcore: registered new interface driver usb-storage [ 1.640766] usbcore: registered new interface driver usbserial_generic [ 1.647384] usbserial: USB Serial support registered for generic [ 1.653448] usbcore: registered new interface driver ftdi_sio [ 1.659232] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.666584] usbcore: registered new interface driver usb_serial_simple [ 1.673141] usbserial: USB Serial support registered for carelink [ 1.679263] usbserial: USB Serial support registered for zio [ 1.684955] usbserial: USB Serial support registered for funsoft [ 1.690992] usbserial: USB Serial support registered for flashloader [ 1.697381] usbserial: USB Serial support registered for google [ 1.703330] usbserial: USB Serial support registered for libtransistor [ 1.709887] usbserial: USB Serial support registered for vivopay [ 1.715928] usbserial: USB Serial support registered for moto_modem [ 1.722228] usbserial: USB Serial support registered for motorola_tetra [ 1.728871] usbserial: USB Serial support registered for novatel_gps [ 1.735256] usbserial: USB Serial support registered for hp4x [ 1.741034] usbserial: USB Serial support registered for suunto [ 1.746997] usbserial: USB Serial support registered for siemens_mpi [ 1.753449] usbcore: registered new interface driver usb_ehset_test [ 1.770283] input: sc-powerkey as /devices/platform/sc-powerkey/input/input0 [ 1.781706] imx-sc-rtc scu:rtc: registered as rtc0 [ 1.786603] imx-sc-rtc scu:rtc: setting system clock to 1970-01-01T01:31:49 UTC (5509) [ 1.795826] i2c /dev entries driver [ 1.809447] Bluetooth: HCI UART driver ver 2.3 [ 1.813938] Bluetooth: HCI UART protocol H4 registered [ 1.819090] Bluetooth: HCI UART protocol BCSP registered [ 1.824437] Bluetooth: HCI UART protocol LL registered [ 1.829584] Bluetooth: HCI UART protocol ATH3K registered [ 1.835016] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 1.841715] Bluetooth: HCI UART protocol Broadcom registered [ 1.847426] Bluetooth: HCI UART protocol QCA registered [ 1.857221] sdhci: Secure Digital Host Controller Interface driver [ 1.863450] sdhci: Copyright(c) Pierre Ossman [ 1.869101] Synopsys Designware Multimedia Card Interface Driver [ 1.877489] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.886599] mmc0: CQHCI version 5.10 [ 1.886654] mmc1: CQHCI version 5.10 [ 1.890242] sdhci-esdhc-imx 5b010000.mmc: voltage-ranges unspecified [ 1.893854] sdhci-esdhc-imx 5b020000.mmc: voltage-ranges unspecified [ 1.900229] ledtrig-cpu: registered to indicate activity on CPUs [ 1.915167] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 1.922281] usbcore: registered new interface driver usbhid [ 1.927898] usbhid: USB HID core driver [ 1.931678] mmc0: SDHCI controller on 5b010000.mmc [5b010000.mmc] using ADMA [ 1.959117] mxc-mipi-csi2 58227000.csi: lanes: 4, name: mxc-mipi-csi2.0 [ 1.976738] mxc-isi 58100000.isi: mxc_isi.0 registered successfully [ 1.987743] mxc-isi 58110000.isi: mxc_isi.1 registered successfully [ 1.998687] mxc-isi 58120000.isi: mxc_isi.2 registered successfully [ 2.009740] mxc-isi 58130000.isi: mxc_isi.3 registered successfully [ 2.020720] mxc-isi 58140000.isi: mxc_isi.4 registered successfully [ 2.030299] mmc0: new HS400 MMC card at address 0001 [ 2.030428] mxc-parallel-csi 58261000.pcsi: mxc_parallel_csi_probe probe successfully [ 2.035966] mmcblk0: mmc0:0001 R1J57L 29.1 GiB [ 2.048006] mmcblk0boot0: mmc0:0001 R1J57L partition 1 8.00 MiB [ 2.048974] remoteproc remoteproc0: releasing imx-rproc [ 2.054183] mmcblk0boot1: mmc0:0001 R1J57L partition 2 8.00 MiB [ 2.065369] mmcblk0rpmb: mmc0:0001 R1J57L partition 3 4.00 MiB, chardev (235:0) [ 2.074094] mmcblk0: p1 p2 [ 2.075698] Galcore version 6.4.3.p2.336687 [ 2.196465] [drm] Initialized vivante 1.0.0 20170808 for 80000000.imx8_gpu0_ss on minor 0 [ 2.209901] [VPU Decoder] warning: init rtx channel failed, ret: -517 [ 2.216410] [VPU Decoder] failed to request mailbox, ret = -517 [ 2.228650] [VPU Encoder] warning: init rtx channel failed, ret: -517 [ 2.235233] [VPU Encoder] fail to request mailbox, ret = -517 [ 2.309643] fsl-audmix 59840000.amix: DAI FE name:HiFi-AUDMIX-FE-ai@59820000 [ 2.316840] fsl-audmix 59840000.amix: DAI FE name:HiFi-AUDMIX-FE-ai@59830000 [ 2.336835] NET: Registered protocol family 26 [ 2.341897] NET: Registered protocol family 10 [ 2.347319] Segment Routing with IPv6 [ 2.351039] NET: Registered protocol family 17 [ 2.355613] Bluetooth: RFCOMM TTY layer initialized [ 2.360508] Bluetooth: RFCOMM socket layer initialized [ 2.365711] Bluetooth: RFCOMM ver 1.11 [ 2.369495] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.374831] Bluetooth: BNEP filters: protocol multicast [ 2.380073] Bluetooth: BNEP socket layer initialized [ 2.385055] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.391007] Bluetooth: HIDP socket layer initialized [ 2.396025] 8021q: 802.1Q VLAN Support v1.8 [ 2.400265] lib80211: common routines for IEEE802.11 drivers [ 2.406082] 9pnet: Installing 9P2000 support [ 2.410409] tsn generic netlink module v1 init... [ 2.415216] Key type dns_resolver registered [ 2.419867] registered taskstats version 1 [ 2.423981] Loading compiled-in X.509 certificates [ 2.454916] mxs_phy 5b100000.usbphy: supply phy-3p0 not found, using dummy regulator [ 2.483138] gpio-42 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 2.492054] imx-lpi2c 37230000.i2c: using scl,sda for recovery [ 2.497905] imx-lpi2c 37230000.i2c: can't get the TX DMA channel, error -19! [ 2.504977] imx-lpi2c 37230000.i2c: error -ENODEV: dma setup error -19, use pio [ 2.516125] pca953x 16-0020: error -ENODEV: reg get err [ 2.521381] pca953x 16-0020: using no AI [ 2.525482] pca953x 16-0020: failed writing register [ 2.530476] pca953x: probe of 16-0020 failed with error -5 [ 2.553075] ov5640 16-003c: supply DOVDD not found, using dummy regulator [ 2.560057] ov5640 16-003c: supply AVDD not found, using dummy regulator [ 2.566824] ov5640 16-003c: supply DVDD not found, using dummy regulator [ 2.621025] ov5640 16-003c: ov5640_read_reg: error: reg=300a [ 2.626711] ov5640 16-003c: ov5640_check_chip_id: failed to read chip identifier [ 2.634803] ov5640: probe of 16-003c failed with error -5 [ 2.640318] i2c i2c-16: LPI2C adapter registered [ 2.646404] imx-lpi2c 5a810000.i2c: can't get the TX DMA channel, error -19! [ 2.653495] imx-lpi2c 5a810000.i2c: error -ENODEV: dma setup error -19, use pio [ 2.668357] max732x 17-0068: failed reading [ 2.672588] max732x: probe of 17-0068 failed with error -5 [ 2.678253] i2c i2c-1: Added multiplexed i2c bus 17 [ 2.683416] i2c i2c-1: Added multiplexed i2c bus 18 [ 2.692554] input: fxos8700 as /devices/platform/bus@5a000000/5a810000.i2c/i2c-1/i2c-19/19-001e/input/input1 [ 2.704406] fxos8700 device driver probe successfully [ 2.708080] input: fxas2100x as /devices/platform/bus@5a000000/5a810000.i2c/i2c-1/i2c-19/19-0021/input/input2 [ 2.723831] fxas2100x 19-0021: fxas2100x device driver probe successfully [ 2.734054] read mpl3115 chip id 0xc4 [ 2.737882] input: mpl3115 as /devices/virtual/input/input3 [ 2.744221] mpl3115 device driver probe successfully [ 2.744313] i2c i2c-1: Added multiplexed i2c bus 19 [ 2.757743] pca953x 20-001a: error -ENODEV: reg get err [ 2.763006] pca953x 20-001a: using no AI [ 2.770605] pca953x 20-001d: error -ENODEV: reg get err [ 2.775876] pca953x 20-001d: using no AI [ 2.781376] isl29023 20-0044: supply vdd not found, using dummy regulator [ 2.794864] input: isl29023 light sensor as /devices/virtual/input/input4 [ 2.802142] isl29023 20-0044: driver version 1.0 enabled [ 2.807684] i2c i2c-1: Added multiplexed i2c bus 20 [ 2.812591] pca954x 1-0071: registered 4 multiplexed busses for I2C switch pca9646 [ 2.821867] i2c i2c-1: LPI2C adapter registered [ 2.827831] imx-lpi2c 58226000.i2c: can't get the TX DMA channel, error -19! [ 2.834921] imx-lpi2c 58226000.i2c: error -ENODEV: dma setup error -19, use pio [ 2.855264] max9286_mipi 21-006a: max9286_read_reg:read reg error: reg=1e [ 2.862086] max9286 is not found, chip id reg 0x1e = 0x(ffffffff) [ 2.868286] i2c i2c-21: LPI2C adapter registered [ 2.881637] pwm-backlight lvds_backlight@0: supply power not found, using dummy regulator [ 2.882957] imx6q-pcie 5f010000.pcie: supply epdev_on not found, using dummy regulator [ 2.898218] imx6q-pcie 5f010000.pcie: No cache used with register defaults set! [ 2.908323] pwm-backlight lvds_backlight@1: supply power not found, using dummy regulator [ 2.926522] dpu-core 56180000.dpu: driver probed [ 2.934365] imx-drm display-subsystem: bound imx-drm-dpu-bliteng.2 (ops dpu_bliteng_ops) [ 2.943109] imx6q-pcie 5f010000.pcie: PCIe PLL locked after 0 us. [ 2.943166] imx-drm display-subsystem: bound imx-dpu-crtc.0 (ops dpu_crtc_ops) [ 2.949322] imx6q-pcie 5f010000.pcie: host bridge /bus@5f000000/pcie@0x5f010000 ranges: [ 2.957023] imx-drm display-subsystem: bound imx-dpu-crtc.1 (ops dpu_crtc_ops) [ 2.964505] imx6q-pcie 5f010000.pcie: IO 0x007ff80000..0x007ff8ffff -> 0x0000000000 [ 2.979949] imx6q-pcie 5f010000.pcie: MEM 0x0070000000..0x007fefffff -> 0x0070000000 [ 3.063580] mmc1: CQHCI version 5.10 [ 3.064671] imx-rproc imx8x_cm4@0: mbox_request_channel_byname() could not locate channel named "txdb" [ 3.067213] sdhci-esdhc-imx 5b020000.mmc: voltage-ranges unspecified [ 3.076534] imx-rproc imx8x_cm4@0: No txdb, ret -22 [ 3.082925] sdhci-esdhc-imx 5b020000.mmc: Got CD GPIO [ 3.088530] remoteproc remoteproc0: imx-rproc is available [ 3.092839] sdhci-esdhc-imx 5b020000.mmc: Got WP GPIO [ 3.130038] debugfs: File 'Playback' in directory 'dapm' already present! [ 3.135421] mmc1: SDHCI controller on 5b020000.mmc [5b020000.mmc] using ADMA [ 3.136879] debugfs: File 'Capture' in directory 'dapm' already present! [ 3.291247] cs42xx8 16-0048: failed to get device ID, ret = -5 [ 3.297518] cs42xx8: probe of 16-0048 failed with error -5 [ 3.314531] imx-lpi2c 56226000.i2c: can't get the TX DMA channel, error -19! [ 3.321625] imx-lpi2c 56226000.i2c: error -ENODEV: dma setup error -19, use pio [ 3.385252] it6263 22-004c: Probe failed. Remote port 'lvds-channel@0' disabled [ 3.393260] adv7511 22-003d: supply avdd not found, using dummy regulator [ 3.400201] adv7511 22-003d: supply dvdd not found, using dummy regulator [ 3.407051] adv7511 22-003d: supply pvdd not found, using dummy regulator [ 3.413903] adv7511 22-003d: supply a2vdd not found, using dummy regulator [ 3.420836] adv7511 22-003d: supply v3p3 not found, using dummy regulator [ 3.427701] adv7511 22-003d: supply v1p2 not found, using dummy regulator [ 3.435112] adv7511 22-003d: Probe failed. Remote port 'dsi_host@56228000' disabled [ 3.442943] i2c i2c-22: LPI2C adapter registered [ 3.444937] mmc1: new ultra high speed SDR104 SDHC card at address 59b4 [ 3.454722] imx-lpi2c 56246000.i2c: can't get the TX DMA channel, error -19! [ 3.454883] mmcblk1: mmc1:59b4 SDU1 29.5 GiB [ 3.461806] imx-lpi2c 56246000.i2c: error -ENODEV: dma setup error -19, use pio [ 3.467772] mmcblk1: p1 p2 [ 3.529611] it6263 23-004c: Probe failed. Remote port 'lvds-channel@0' disabled [ 3.537681] adv7511 23-003d: supply avdd not found, using dummy regulator [ 3.544665] adv7511 23-003d: supply dvdd not found, using dummy regulator [ 3.551545] adv7511 23-003d: supply pvdd not found, using dummy regulator [ 3.558415] adv7511 23-003d: supply a2vdd not found, using dummy regulator [ 3.565367] adv7511 23-003d: supply v3p3 not found, using dummy regulator [ 3.572259] adv7511 23-003d: supply v1p2 not found, using dummy regulator [ 3.579974] adv7511 23-003d: Probe failed. Remote port 'dsi_host@56248000' disabled [ 3.587829] i2c i2c-23: LPI2C adapter registered [ 3.594536] imx-drm display-subsystem: bound imx-drm-dpu-bliteng.2 (ops dpu_bliteng_ops) [ 3.602973] imx-drm display-subsystem: bound imx-dpu-crtc.0 (ops dpu_crtc_ops) [ 3.610476] imx-drm display-subsystem: bound imx-dpu-crtc.1 (ops dpu_crtc_ops) [ 3.618232] imx-drm display-subsystem: bound bus@56220000:ldb@562210e0 (ops imx8qxp_ldb_ops) [ 3.626735] imx-drm display-subsystem: bound 56228000.dsi_host (ops nwl_dsi_component_ops) [ 3.635431] imx-drm display-subsystem: bound bus@56220000:ldb@562410e0 (ops imx8qxp_ldb_ops) [ 3.643920] imx-drm display-subsystem: bound 56248000.dsi_host (ops nwl_dsi_component_ops) [ 3.652652] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 3.686145] isi-m2m 58100000.isi:m2m_device: Register m2m success for ISI.0 [ 3.695281] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.705085] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.711746] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 3.720392] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db [ 3.734151] ALSA device list: [ 3.737143] #0: imx-audmix [ 3.740058] #1: bt-sco-audio [ 3.743133] #2: wm8960-audio [ 3.973765] imx6q-pcie 5f010000.pcie: Phy link never came up [ 3.979901] imx6q-pcie 5f010000.pcie: failed to initialize host [ 3.985877] imx6q-pcie 5f010000.pcie: unable to add pcie port. [ 4.036820] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.045071] VFS: Mounted root (ext4 filesystem) on device 179:98. [ 4.052325] devtmpfs: mounted [ 4.056487] Freeing unused kernel memory: 2880K [ 4.061144] Run /sbin/init as init process [ 4.238310] systemd[1]: System time before build time, advancing clock. [ 4.268432] systemd[1]: systemd 247.6+ running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -ZSTD -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 4.291319] systemd[1]: Detected architecture arm64. Welcome to NXP i.MX Release Distro 5.10-hardknott (hardknott)! [ 4.344066] systemd[1]: Set hostname to . [ 4.428632] systemd-sysv-generator[215]: SysV service '/etc/init.d/rc.local' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.453243] systemd-sysv-generator[215]: SysV service '/etc/init.d/sendsigs' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.477845] systemd-sysv-generator[215]: SysV service '/etc/init.d/umountnfs.sh' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.502794] systemd-sysv-generator[215]: SysV service '/etc/init.d/save-rtc.sh' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.529038] systemd-sysv-generator[215]: SysV service '/etc/init.d/single' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.553703] systemd-sysv-generator[215]: SysV service '/etc/init.d/halt' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.577624] systemd-sysv-generator[215]: SysV service '/etc/init.d/umountfs' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.601868] systemd-sysv-generator[215]: SysV service '/etc/init.d/reboot' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.993931] systemd[1]: Queued start job for default target Graphical Interface. [ 5.002795] random: systemd: uninitialized urandom read (16 bytes read) [ 5.075785] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 5.099445] random: systemd: uninitialized urandom read (16 bytes read) [ 5.108413] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 5.131293] random: systemd: uninitialized urandom read (16 bytes read) [ 5.140332] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 5.165744] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 5.187981] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 5.211840] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 5.235983] systemd[1]: Reached target Host and Network Name Lookups. [ OK ] Reached target Host and Network Name Lookups. [ 5.259559] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 5.279304] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 5.299295] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 5.319335] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 5.344875] systemd[1]: Listening on RPCbind Server Activation Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ 5.367696] systemd[1]: Reached target RPC Port Mapper. [ OK ] Reached target RPC Port Mapper. [ 5.380263] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 5.399568] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 5.424294] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 5.448150] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 5.472275] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 5.484003] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 5.509290] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 5.532185] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 5.556202] systemd[1]: Listening on User Database Manager Socket. [ OK ] Listening on User Database Manager Socket. [ 5.584628] systemd[1]: Mounting Huge Pages File System... Mounting Huge Pages File System... [ 5.612146] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 5.640370] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 5.664077] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 5.677417] systemd[1]: Mounting Temporary Directory (/tmp)... Mounting Temporary Directory (/tmp)... [ 5.710371] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of st…odes for the current kernel... [ 5.740976] systemd[1]: Starting Load Kernel Module configfs... Starting Load Kernel Module configfs... [ 5.768429] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 5.796696] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 5.812532] fuse: init (API version 7.32) [ 5.823945] systemd[1]: Starting RPC Bind... Starting RPC Bind... [ 5.843689] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 5.853729] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 5.866691] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 5.880851] systemd[1]: Starting Journal Service... Starting Journal Service... [ 5.904192] systemd[1]: Condition check resulted in Load Kernel Modules being skipped. [ 5.916497] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 5.937740] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) [ 5.955257] systemd[1]: Starting Apply Kernel Variables... Starting Apply Kernel Variables... [ 5.979692] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 6.003629] systemd[1]: Starting Setup Virtual Console... Starting Setup Virtual Console... [ 6.032211] systemd[1]: Started RPC Bind. [ OK ] Started RPC Bind. [ 6.051866] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Mounted Huge Pages File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Kernel Debug File System. [ OK ] Mounted Temporary Directory (/tmp). [ OK ] Finished Create list of st… nodes for the current kernel. [ OK ] Finished Load Kernel Module configfs. [ OK ] Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module fuse. [ OK ] Finished Remount Root and Kernel File Systems. [ OK ] Finished Apply Kernel Variables. [ OK ] Finished Setup Virtual Console. Mounting FUSE Control File System... Mounting Kernel Configuration File System... Starting Flush Journal to Persistent Storage... [ 6.357106] systemd-journald[227]: Received client request to flush runtime journal. Starting Create Static Device Nodes in /dev... [ OK ] Mounted FUSE Control File System. [ OK ] Mounted Kernel Configuration File System. [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). Mounting /var/volatile... Starting Rule-based Manage…for Device Events and Files... [ OK ] Mounted /var/volatile. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ OK ] Started Rule-based Manager for Device Events and Files. [ OK ] Finished Create Volatile Files and Directories. Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Set. [ OK ] Reached target System Time Synchronized. [ OK ] Finished Coldplug All udev Devices. [ OK ] Reached target System Initialization. [ OK ] Started Daily rotation of log files. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on dropbear.socket. Starting Weston socket. Starting Console System Startup Logging... Starting Start Psplash Boot Screen... [ OK ] Listening on Weston socket. [ OK ] Finished Console System Startup Logging. [ OK ] Started Start Psplash Boot Screen. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System.[ 7.288745] caam 31400000.crypto: device ID = 0x0a16040000000100 (Era 9) [ 7.327188] [VPU Encoder] enable mu for core[0] [ 7.331544] caam 31400000.crypto: job rings = 2, qi = 0 [ OK ] Started Job spooling tools.[ 7.340260] [VPU Encoder] vpu encoder core[0] firmware version is 1.3.1 [ 7.353438] imx8_media_dev: module is from the staging directory, the quality is unknown, you have been warned. [ OK ] Started Periodic Command Scheduler. [ 7.385522] mx8-img-md: Registered mxc_isi.0.capture as /dev/video1 [ 7.395452] mx8-img-md: Registered mxc_isi.1.capture as /dev/video2 [ OK ] Started D-Bus System Message Bus. [ OK ] Started Configuration for i.MX GPU (Former rc_gpu.S). [ 7.470882] mx8-img-md: Registered mxc_isi.2.capture as /dev/video3 Starting IPv6 Packet Filtering Framework...[ 7.481741] CAN device driver interface Starting IPv4 Packet Filtering Framework... Starting Network Time Service (one-shot ntpdate[ 7.525921] mx8-img-md: Registered mxc_isi.3.capture as /dev/video4 mode)... [ 7.549680] mx8-img-md: Registered mxc_isi.4.capture as /dev/video5 Starting Telephony service...[ 7.560541] unregister ISI channel: mxc_isi.0 [ OK ] Started Updates psplash to basic[ 7.573958] unregister ISI channel: mxc_isi.1 . [ OK ] Started Start psplash-syst…progress communication helper. [ 7.608870] unregister ISI channel: mxc_isi.2 [ OK ] Started System Logging Service. Starting User Login Management... [ OK ] Started TEE Supplicant. [ OK ] Finished IPv6 Packet Filtering Framework. [ OK ] Finished IPv4 Packet Filtering Framework. [ OK ] Finished Network Time Service (one-shot ntpdate mode). [ OK ] Started Telephony service. [ OK ] Started User Login Management. [ OK ] Reached target Network (Pre). [ OK ] Reached target Hardware activated USB gadget. Starting Save/Restore Sound Card State... Starting Connection service... Starting Network Service... [ OK ] Finished Load/Save Random Seed. [ OK ] Finished Save/Restore Sound Card State. [ OK ] Started Network Service. [ OK ] Started Connection service. [ OK ] Created slice system-systemd\x2dbacklight.slice. [ OK ] Reached target Network. [ OK ] Reached target Sound Card. Starting Avahi mDNS/DNS-SD Stack... [ OK ] Started NFS status monitor for NFSv2/3 locking.. [ OK ] Started Respond to IPv6 Node Information Queries. [ OK ] Started Update psplash to network. Starting Terminate Psplash Boot Screen... Starting /etc/rc.local Compatibility... [ OK ] Started Network Router Discovery Daemon. Starting Load/Save Screen … backlight:lvds_backlight@0... Starting Load/Save Screen … backlight:lvds_backlight@1... Starting Permit User Sessions... [FAILED] Failed to start Terminate Psplash Boot Screen. See 'systemctl status psplash-quit.service' for details. [ OK ] Started /etc/rc.local Compatibility. [ OK ] Finished Load/Save Screen …of backlight:lvds_backlight@0. [ OK ] Finished Load/Save Screen …of backlight:lvds_backlight@1. [ OK ] Finished Permit User Sessions. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ 9.233866] caam algorithms registered in /proc/crypto [ 9.244120] caam 31400000.crypto: caam pkc algorithms registered in /proc/crypto [ 9.251684] caam 31400000.crypto: registering rng-caam [ 9.254728] Device caam-keygen registered [ OK ] Created slice system-systemd\x2dfsck.slice. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyLP0. [ OK ] Reached target Login Prompts. [ OK ] Reached target Multi-User System. Starting File System Check on /dev/mmcblk0p1... Starting File System Check on /dev/mmcblk0p2... Starting Hostname Service... Starting Weston, a Wayland…ositor, as a system service... Starting WPA supplicant... [ OK ] Finished File System Check on /dev/mmcblk0p1. Mounting /run/media/mmcblk0p1... Starting File System Check on /dev/mmcblk1p1... Starting User Database Manager... [ OK ] Finished File System Check on /dev/mmcblk0p2. [ OK ] Started WPA supplicant. Mounting /run/media/mmcblk0p2... [ OK ] Mounted /run/media/mmcblk0p1. [ OK ] Finished File System Check on /dev/m[ 9.647934] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) mcblk1p1. [ OK ] Mounted /run/media/mmcblk0p2. Mounting /run/media/mmcblk1p1... [ OK ] Started User Database Manager. [ OK ] Started Hostname Service. [ OK ] Mounted /run/media/mmcblk1p1. [ OK ] Created slice User Slice of UID 0. Starting User Runtime Directory /run/user/0... [ OK ] Finished User Runtime Directory /run/user/0. Starting User Manager for UID 0... [ 9.938090] audit: type=1006 audit(1616581523.696:2): pid=664 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=1 res=1 [ OK ] Started User Manager for UID 0. [ OK ] Started Session c1 of user root. [ 10.586236] audit: type=1006 audit(1616581524.344:3): pid=644 uid=0 old-auid=4294967295 auid=0 tty=tty7 old-ses=4294967295 ses=2 res=1 [FAILED] Failed to start Weston, a …mpositor, as a system service. See 'systemctl status weston.service' for details. [ OK ] Reached target Graphical Interface. Starting Update UTMP about System Runlevel Changes... [ OK ] Finished Update UTMP about System Runlevel Changes. NXP i.MX Release Distro 5.10-hardknott imx8qxpc0mek ttyLP0 imx8qxpc0mek login: root ^[[24;80Rroot@imx8qxpc0mek:~# ;80R root@imx8qxpc0mek:~# root@imx8qxpc0mek:~# root@imx8qxpc0mek:~# root@imx8qxpc0mek:~# ifconfig -a eth0: flags=4099 mtu 1500 ether 00:04:9f:06:a5:88 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 92 bytes 7826 (7.6 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 92 bytes 7826 (7.6 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 root@imx8qxpc0mek:~# root@imx8qxpc0mek:~# [ 33.859133] usb_otg1_vbus: disabling root@imx8qxpc0mek:~# root@imx8qxpc0mek:~# dmesg | grep can [ 2.497905] imx-lpi2c 37230000.i2c: can't get the TX DMA channel, error -19! [ 2.646404] imx-lpi2c 5a810000.i2c: can't get the TX DMA channel, error -19! [ 2.827831] imx-lpi2c 58226000.i2c: can't get the TX DMA channel, error -19! [ 3.314531] imx-lpi2c 56226000.i2c: can't get the TX DMA channel, error -19! [ 3.454722] imx-lpi2c 56246000.i2c: can't get the TX DMA channel, error -19! root@imx8qxpc0mek:~# root@imx8qxpc0mek:~# U-Boot 2021.04-5.10.35-2.0.0+g3463140881 (Jun 08 2021 - 01:39:44 +0000) CPU: NXP i.MX8QXP RevC A35 at 1200 MHz at 26C Model: NXP i.MX8QXP MEK Board: iMX8QXP MEK Boot: SD1 DRAM: 3 GiB TCPC: Vendor ID [0x1fc9], Product ID [0x5110], Addr [I2C1 0x50] MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... *** Warning - bad CRC, using default environment [*]-Video Link 0it6263_i2c_reg_read, read err 3 faill to read from it6263 revision, ret 3 (1280 x 720) [0] dpu@56180000, video [1] lvds-channel@0, display [2] lvds-to-hdmi-bridge@4c, video_bridge In: serial Out: serial Err: serial BuildInfo: - SCFW 58865b98, SECO-FW 7aeb8423, IMX-MKIMAGE 5138add7, ATF ec35fef - U-Boot 2021.04-5.10.35-2.0.0+g3463140881 switch to partitions #0, OK mmc1 is current device flash target is MMC:1 Net: eth0: ethernet@5b040000 [PRIME] Warning: ethernet@5b050000 (eth1) using random MAC address - 32:d3:4c:89:a6:5a , eth1: ethernet@5b050000 Fastboot: Normal Normal Boot Hit any key to stop autoboot: 3 2 1 0 switch to partitions #0, OK mmc1 is current device Failed to load 'boot.scr' 29487616 bytes read in 403 ms (69.8 MiB/s) Booting from mmc ... 100412 bytes read in 3 ms (31.9 MiB/s) Moving Image from 0x80280000 to 0x80400000, end=820b0000 ## Flattened Device Tree blob at 83000000 Booting using the fdt blob at 0x83000000 Using Device Tree in place at 0000000083000000, end 000000008301b83b Disable clock-controller@5a4d0000 rsrc 62 not owned Disable clock-controller@5ac90000 rsrc 102 not owned Disable clock-controller@585a0000 rsrc 411 not owned Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd042] [ 0.000000] Linux version 5.10.35-lts-5.10.y+gef3f2cfc6010 (oe-user@oe-host) (aarch64-poky-linux-gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.36.1.20210209) #1 SMP PREEMPT Tue Jun 8 14:42:10 UTC 2021 [ 0.000000] Machine model: Freescale i.MX8QXP MEK [ 0.000000] efi: UEFI not found. [ 0.000000] OF: fdt: Reserved memory: failed to reserve memory for node 'm4@0x88000000': base 0x0000000088000000, size 128 MiB [ 0.000000] OF: reserved mem: OVERLAP DETECTED! [ 0.000000] vdev0vring0@90000000 (0x0000000090000000--0x0000000090008000) overlaps with rsc_table@90000000 (0x0000000090000000--0x0000000090008000) [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000c0000000, size 960 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000090400000, size 1 MiB [ 0.000000] OF: reserved mem: initialized node vdevbuffer, compatible id shared-dma-pool [ 0.000000] earlycon: lpuart32 at MMIO32 0x000000005a060000 (options '') [ 0.000000] printk: bootconsole [lpuart32] enabled [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000080200000-0x00000008bfffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x8bf9b3700-0x8bf9b5fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080200000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x00000008bfffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080200000-0x0000000083ffffff] [ 0.000000] node 0: [mem 0x0000000084000000-0x00000000861fffff] [ 0.000000] node 0: [mem 0x0000000086200000-0x000000008fffffff] [ 0.000000] node 0: [mem 0x0000000090000000-0x000000009001ffff] [ 0.000000] node 0: [mem 0x0000000090020000-0x00000000900fefff] [ 0.000000] node 0: [mem 0x00000000900ff000-0x00000000900fffff] [ 0.000000] node 0: [mem 0x0000000090100000-0x00000000901fffff] [ 0.000000] node 0: [mem 0x0000000090200000-0x00000000904fffff] [ 0.000000] node 0: [mem 0x0000000090500000-0x0000000091ffffff] [ 0.000000] node 0: [mem 0x0000000092000000-0x0000000094bfffff] [ 0.000000] node 0: [mem 0x0000000094c00000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000880000000-0x00000008bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080200000-0x00000008bfffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 23 pages/cpu s56280 r8192 d29736 u94208 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 773640 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: console=ttyLP0,115200 earlycon root=/dev/mmcblk1p2 rootwait rw [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000bc000000-0x00000000c0000000] (64MB) [ 0.000000] Memory: 1788976K/3143680K available (17536K kernel code, 1468K rwdata, 6780K rodata, 2880K init, 545K bss, 371664K reserved, 983040K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 512 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000051b00000 [ 0.000000] random: get_random_bytes called from start_kernel+0x330/0x4f4 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 8.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns [ 0.000005] sched_clock: 56 bits at 8MHz, resolution 125ns, wraps every 2199023255500ns [ 0.008663] Console: colour dummy device 80x25 [ 0.012856] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.00 BogoMIPS (lpj=32000) [ 0.023023] pid_max: default: 32768 minimum: 301 [ 0.027706] LSM: Security Framework initializing [ 0.032305] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.039626] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.049030] rcu: Hierarchical SRCU implementation. [ 0.056057] EFI services will not be available. [ 0.060550] smp: Bringing up secondary CPUs ... [ 0.065491] Detected VIPT I-cache on CPU1 [ 0.065526] GICv3: CPU1: found redistributor 1 region 0:0x0000000051b20000 [ 0.065579] CPU1: Booted secondary processor 0x0000000001 [0x410fd042] [ 0.066318] Detected VIPT I-cache on CPU2 [ 0.066343] GICv3: CPU2: found redistributor 2 region 0:0x0000000051b40000 [ 0.066373] CPU2: Booted secondary processor 0x0000000002 [0x410fd042] [ 0.067073] Detected VIPT I-cache on CPU3 [ 0.067095] GICv3: CPU3: found redistributor 3 region 0:0x0000000051b60000 [ 0.067123] CPU3: Booted secondary processor 0x0000000003 [0x410fd042] [ 0.067201] smp: Brought up 1 node, 4 CPUs [ 0.123105] SMP: Total of 4 processors activated. [ 0.127789] CPU features: detected: 32-bit EL0 Support [ 0.132934] CPU features: detected: CRC32 instructions [ 0.138041] CPU features: detected: 32-bit EL1 Support [ 0.152059] CPU: All CPU(s) started at EL2 [ 0.155861] alternatives: patching kernel code [ 0.161484] devtmpfs: initialized [ 0.180843] KASLR disabled due to lack of seed [ 0.185146] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.194696] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.238747] pinctrl core: initialized pinctrl subsystem [ 0.244361] DMI not present or invalid. [ 0.248401] NET: Registered protocol family 16 [ 0.262479] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations [ 0.270722] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.279779] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.287448] audit: initializing netlink subsys (disabled) [ 0.293008] audit: type=2000 audit(0.208:1): state=initialized audit_enabled=0 res=1 [ 0.293762] thermal_sys: Registered thermal governor 'step_wise' [ 0.300493] thermal_sys: Registered thermal governor 'power_allocator' [ 0.307017] cpuidle: using governor menu [ 0.317394] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.323977] ASID allocator initialised with 65536 entries [ 0.331404] Serial: AMBA PL011 UART driver [ 0.335246] imx mu driver is registered. [ 0.339085] imx rpmsg driver is registered. [ 0.447382] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.453770] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.460445] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.467135] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.475018] cryptd: max_cpu_qlen set to 1000 [ 0.483938] ACPI: Interpreter disabled. [ 0.489988] iommu: Default domain type: Translated [ 0.494761] vgaarb: loaded [ 0.497569] SCSI subsystem initialized [ 0.501410] usbcore: registered new interface driver usbfs [ 0.506613] usbcore: registered new interface driver hub [ 0.511887] usbcore: registered new device driver usb [ 0.519574] mc: Linux media interface: v0.10 [ 0.523543] videodev: Linux video capture interface: v2.00 [ 0.529062] pps_core: LinuxPPS API ver. 1 registered [ 0.533931] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.543065] PTP clock support registered [ 0.547413] EDAC MC: Ver: 3.0.0 [ 0.552632] FPGA manager framework [ 0.555807] Advanced Linux Sound Architecture Driver Initialized. [ 0.562889] Bluetooth: Core ver 2.22 [ 0.566175] NET: Registered protocol family 31 [ 0.570559] Bluetooth: HCI device and connection manager initialized [ 0.576904] Bluetooth: HCI socket layer initialized [ 0.581768] Bluetooth: L2CAP socket layer initialized [ 0.586820] Bluetooth: SCO socket layer initialized [ 0.593527] imx-scu scu: NXP i.MX SCU Initialized [ 0.637393] random: fast init done [ 0.709840] imx8qxp-pinctrl scu:pinctrl: Invalid fsl,pins or pins property in node /scu/pinctrl/wifi_initgrp [ 0.719366] imx8qxp-pinctrl scu:pinctrl: initialized IMX pinctrl driver [ 0.751537] clocksource: Switched to clocksource arch_sys_counter [ 0.757579] VFS: Disk quotas dquot_6.6.0 [ 0.761278] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.768484] pnp: PnP ACPI: disabled [ 0.806115] NET: Registered protocol family 2 [ 0.810632] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 0.818940] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.826978] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) [ 0.834545] TCP: Hash tables configured (established 32768 bind 32768) [ 0.840907] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.847526] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) [ 0.854793] NET: Registered protocol family 1 [ 0.859351] RPC: Registered named UNIX socket transport module. [ 0.864943] RPC: Registered udp transport module. [ 0.869627] RPC: Registered tcp transport module. [ 0.874318] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.881593] PCI: CLS 0 bytes, default 64 [ 0.885956] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 0.895746] kvm [1]: IPA Size Limit: 40 bits [ 0.901479] kvm [1]: GICv3: no GICV resource entry [ 0.905934] kvm [1]: disabling GICv2 emulation [ 0.910377] kvm [1]: GIC system register CPU interface enabled [ 0.916274] kvm [1]: vgic interrupt IRQ9 [ 0.920233] kvm [1]: Hyp mode initialized successfully [ 0.929511] Initialise system trusted keyrings [ 0.933821] workingset: timestamp_bits=42 max_order=20 bucket_order=0 [ 0.947493] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.953777] NFS: Registering the id_resolver key type [ 0.958529] Key type id_resolver registered [ 0.962665] Key type id_legacy registered [ 0.966747] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.973348] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 0.980756] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.987255] 9p: Installing v9fs 9p2000 file system support [ 1.037867] Key type asymmetric registered [ 1.041635] Asymmetric key parser 'x509' registered [ 1.046538] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 1.053888] io scheduler mq-deadline registered [ 1.058395] io scheduler kyber registered [ 1.091130] pwm-backlight lvds_backlight@0: supply power not found, using dummy regulator [ 1.099480] pwm-backlight lvds_backlight@1: supply power not found, using dummy regulator [ 1.108952] EINJ: ACPI disabled. [ 1.209349] mxs-dma 5b810000.dma-apbh: initialized [ 1.221109] Bus freq driver module loaded [ 1.234300] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.246720] 5a060000.serial: ttyLP0 at MMIO 0x5a060010 (irq = 67, base_baud = 5000000) is a FSL_LPUAR[ 1.255899] printk: console [ttyLP0] enabled [ 1.255899] printk: console [ttyLP0] enabled [ 1.264324] printk: bootconsole [lpuart32] disabled [ 1.264324] printk: bootconsole [lpuart32] disabled [ 1.275302] 5a070000.serial: ttyLP1 at MMIO 0x5a070010 (irq = 68, base_baud = 5000000) is a FSL_LPUART [ 1.285855] 5a080000.serial: ttyLP2 at MMIO 0x5a080010 (irq = 69, base_baud = 5000000) is a FSL_LPUART [ 1.296369] 5a090000.serial: ttyLP3 at MMIO 0x5a090010 (irq = 70, base_baud = 5000000) is a FSL_LPUART [ 1.370367] nwl-dsi 56228000.dsi_host: [drm:nwl_dsi_probe] *ERROR* Failed to get device IRQ: -517 [ 1.379998] nwl-dsi 56248000.dsi_host: [drm:nwl_dsi_probe] *ERROR* Failed to get device IRQ: -517 [ 1.399007] loop: module loaded [ 1.404964] megasas: 07.714.04.00-rc1 [ 1.412896] imx ahci driver is registered. [ 1.429420] spi-nor spi0.0: mt35xu512aba (65536 Kbytes) [ 1.443643] libphy: Fixed MDIO Bus: probed [ 1.450237] tun: Universal TUN/TAP device driver, 1.6 [ 1.458202] thunder_xcv, ver 1.0 [ 1.461513] thunder_bgx, ver 1.0 [ 1.464797] nicpf, ver 1.0 [ 1.469932] pps pps0: new PPS source ptp0 [ 1.484782] libphy: fec_enet_mii_bus: probed [ 1.494128] fec 5b040000.ethernet eth0: registered PHC device 0 [ 1.507097] hclge is initializing [ 1.510520] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 1.517785] hns3: Copyright (c) 2017 Huawei Corporation. [ 1.523192] e1000: Intel(R) PRO/1000 Network Driver [ 1.528088] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.533928] e1000e: Intel(R) PRO/1000 Network Driver [ 1.538914] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.544891] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.550308] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.555933] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 1.562216] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.568805] sky2: driver version 1.30 [ 1.574798] VFIO - User Level meta-driver version: 0.3 [ 1.593464] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.600068] ehci-pci: EHCI PCI platform driver [ 1.604617] ehci-platform: EHCI generic platform driver [ 1.610767] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.616991] ohci-pci: OHCI PCI platform driver [ 1.621516] ohci-platform: OHCI generic platform driver [ 1.629796] usbcore: registered new interface driver uas [ 1.635186] usbcore: registered new interface driver usb-storage [ 1.641305] usbcore: registered new interface driver usbserial_generic [ 1.647923] usbserial: USB Serial support registered for generic [ 1.653990] usbcore: registered new interface driver ftdi_sio [ 1.659772] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.667125] usbcore: registered new interface driver usb_serial_simple [ 1.673686] usbserial: USB Serial support registered for carelink [ 1.679809] usbserial: USB Serial support registered for zio [ 1.685503] usbserial: USB Serial support registered for funsoft [ 1.691545] usbserial: USB Serial support registered for flashloader [ 1.697926] usbserial: USB Serial support registered for google [ 1.703881] usbserial: USB Serial support registered for libtransistor [ 1.710441] usbserial: USB Serial support registered for vivopay [ 1.716482] usbserial: USB Serial support registered for moto_modem [ 1.722781] usbserial: USB Serial support registered for motorola_tetra [ 1.729426] usbserial: USB Serial support registered for novatel_gps [ 1.735813] usbserial: USB Serial support registered for hp4x [ 1.741587] usbserial: USB Serial support registered for suunto [ 1.747573] usbserial: USB Serial support registered for siemens_mpi [ 1.754011] usbcore: registered new interface driver usb_ehset_test [ 1.770933] input: sc-powerkey as /devices/platform/sc-powerkey/input/input0 [ 1.782372] imx-sc-rtc scu:rtc: registered as rtc0 [ 1.787271] imx-sc-rtc scu:rtc: setting system clock to 1970-01-01T00:00:08 UTC (8) [ 1.796249] i2c /dev entries driver [ 1.809886] Bluetooth: HCI UART driver ver 2.3 [ 1.814382] Bluetooth: HCI UART protocol H4 registered [ 1.819534] Bluetooth: HCI UART protocol BCSP registered [ 1.824882] Bluetooth: HCI UART protocol LL registered [ 1.830038] Bluetooth: HCI UART protocol ATH3K registered [ 1.835467] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 1.842082] Bluetooth: HCI UART protocol Broadcom registered [ 1.847784] Bluetooth: HCI UART protocol QCA registered [ 1.857509] sdhci: Secure Digital Host Controller Interface driver [ 1.863737] sdhci: Copyright(c) Pierre Ossman [ 1.869393] Synopsys Designware Multimedia Card Interface Driver [ 1.877788] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.886847] mmc0: CQHCI version 5.10 [ 1.887020] mmc1: CQHCI version 5.10 [ 1.890486] sdhci-esdhc-imx 5b010000.mmc: voltage-ranges unspecified [ 1.894129] sdhci-esdhc-imx 5b020000.mmc: voltage-ranges unspecified [ 1.900480] ledtrig-cpu: registered to indicate activity on CPUs [ 1.915411] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 1.922515] usbcore: registered new interface driver usbhid [ 1.928144] usbhid: USB HID core driver [ 1.932033] mmc0: SDHCI controller on 5b010000.mmc [5b010000.mmc] using ADMA [ 1.951551] mxc-mipi-csi2 58227000.csi: lanes: 4, name: mxc-mipi-csi2.0 [ 1.970839] mxc-isi 58100000.isi: mxc_isi.0 registered successfully [ 1.981864] mxc-isi 58110000.isi: mxc_isi.1 registered successfully [ 1.992810] mxc-isi 58120000.isi: mxc_isi.2 registered successfully [ 2.003927] mxc-isi 58130000.isi: mxc_isi.3 registered successfully [ 2.014839] mxc-isi 58140000.isi: mxc_isi.4 registered successfully [ 2.024587] mxc-parallel-csi 58261000.pcsi: mxc_parallel_csi_probe probe successfully [ 2.028683] mmc0: new HS400 MMC card at address 0001 [ 2.038095] mmcblk0: mmc0:0001 R1J57L 29.1 GiB [ 2.038189] remoteproc remoteproc0: releasing imx-rproc [ 2.042897] mmcblk0boot0: mmc0:0001 R1J57L partition 1 8.00 MiB [ 2.054191] mmcblk0boot1: mmc0:0001 R1J57L partition 2 8.00 MiB [ 2.060335] mmcblk0rpmb: mmc0:0001 R1J57L partition 3 4.00 MiB, chardev (235:0) [ 2.061966] Galcore version 6.4.3.p2.336687 [ 2.187048] [drm] Initialized vivante 1.0.0 20170808 for 80000000.imx8_gpu0_ss on minor 0 [ 2.200488] [VPU Decoder] warning: init rtx channel failed, ret: -517 [ 2.207010] [VPU Decoder] failed to request mailbox, ret = -517 [ 2.219201] [VPU Encoder] warning: init rtx channel failed, ret: -517 [ 2.225803] [VPU Encoder] fail to request mailbox, ret = -517 [ 2.301961] fsl-audmix 59840000.amix: DAI FE name:HiFi-AUDMIX-FE-ai@59820000 [ 2.309147] fsl-audmix 59840000.amix: DAI FE name:HiFi-AUDMIX-FE-ai@59830000 [ 2.329008] NET: Registered protocol family 26 [ 2.334116] NET: Registered protocol family 10 [ 2.339544] Segment Routing with IPv6 [ 2.343275] NET: Registered protocol family 17 [ 2.347891] Bluetooth: RFCOMM TTY layer initialized [ 2.352790] Bluetooth: RFCOMM socket layer initialized [ 2.357983] Bluetooth: RFCOMM ver 1.11 [ 2.361772] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.367107] Bluetooth: BNEP filters: protocol multicast [ 2.372353] Bluetooth: BNEP socket layer initialized [ 2.377332] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.383282] Bluetooth: HIDP socket layer initialized [ 2.388307] 8021q: 802.1Q VLAN Support v1.8 [ 2.392534] lib80211: common routines for IEEE802.11 drivers [ 2.398376] 9pnet: Installing 9P2000 support [ 2.402694] tsn generic netlink module v1 init... [ 2.407492] Key type dns_resolver registered [ 2.412155] registered taskstats version 1 [ 2.416272] Loading compiled-in X.509 certificates [ 2.447274] mxs_phy 5b100000.usbphy: supply phy-3p0 not found, using dummy regulator [ 2.475444] gpio-42 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file [ 2.484378] imx-lpi2c 37230000.i2c: using scl,sda for recovery [ 2.490242] imx-lpi2c 37230000.i2c: can't get the TX DMA channel, error -19! [ 2.497315] imx-lpi2c 37230000.i2c: error -ENODEV: dma setup error -19, use pio [ 2.508483] pca953x 16-0020: error -ENODEV: reg get err [ 2.513740] pca953x 16-0020: using no AI [ 2.517842] pca953x 16-0020: failed writing register [ 2.522842] pca953x: probe of 16-0020 failed with error -5 [ 2.545650] ov5640 16-003c: supply DOVDD not found, using dummy regulator [ 2.552620] ov5640 16-003c: supply AVDD not found, using dummy regulator [ 2.559390] ov5640 16-003c: supply DVDD not found, using dummy regulator [ 2.613594] ov5640 16-003c: ov5640_read_reg: error: reg=300a [ 2.619283] ov5640 16-003c: ov5640_check_chip_id: failed to read chip identifier [ 2.627066] ov5640: probe of 16-003c failed with error -5 [ 2.632578] i2c i2c-16: LPI2C adapter registered [ 2.638683] imx-lpi2c 5a810000.i2c: can't get the TX DMA channel, error -19! [ 2.645771] imx-lpi2c 5a810000.i2c: error -ENODEV: dma setup error -19, use pio [ 2.660629] max732x 17-0068: failed reading [ 2.664866] max732x: probe of 17-0068 failed with error -5 [ 2.670535] i2c i2c-1: Added multiplexed i2c bus 17 [ 2.675723] i2c i2c-1: Added multiplexed i2c bus 18 [ 2.684804] input: fxos8700 as /devices/platform/bus@5a000000/5a810000.i2c/i2c-1/i2c-19/19-001e/input/input1 [ 2.696657] fxos8700 device driver probe successfully [ 2.700317] input: fxas2100x as /devices/platform/bus@5a000000/5a810000.i2c/i2c-1/i2c-19/19-0021/input/input2 [ 2.716071] fxas2100x 19-0021: fxas2100x device driver probe successfully [ 2.726271] read mpl3115 chip id 0xc4 [ 2.730094] input: mpl3115 as /devices/virtual/input/input3 [ 2.736468] mpl3115 device driver probe successfully [ 2.736560] i2c i2c-1: Added multiplexed i2c bus 19 [ 2.750024] pca953x 20-001a: error -ENODEV: reg get err [ 2.755281] pca953x 20-001a: using no AI [ 2.762855] pca953x 20-001d: error -ENODEV: reg get err [ 2.768127] pca953x 20-001d: using no AI [ 2.773618] isl29023 20-0044: supply vdd not found, using dummy regulator [ 2.787102] input: isl29023 light sensor as /devices/virtual/input/input4 [ 2.794371] isl29023 20-0044: driver version 1.0 enabled [ 2.799921] i2c i2c-1: Added multiplexed i2c bus 20 [ 2.804826] pca954x 1-0071: registered 4 multiplexed busses for I2C switch pca9646 [ 2.814102] i2c i2c-1: LPI2C adapter registered [ 2.820064] imx-lpi2c 58226000.i2c: can't get the TX DMA channel, error -19! [ 2.827148] imx-lpi2c 58226000.i2c: error -ENODEV: dma setup error -19, use pio [ 2.847721] max9286_mipi 21-006a: max9286_read_reg:read reg error: reg=1e [ 2.854543] max9286 is not found, chip id reg 0x1e = 0x(ffffffff) [ 2.860745] i2c i2c-21: LPI2C adapter registered [ 2.873983] pwm-backlight lvds_backlight@0: supply power not found, using dummy regulator [ 2.875322] imx6q-pcie 5f010000.pcie: supply epdev_on not found, using dummy regulator [ 2.886027] pwm-backlight lvds_backlight@1: supply power not found, using dummy regulator [ 2.890438] imx6q-pcie 5f010000.pcie: No cache used with register defaults set! [ 2.909026] dpu-core 56180000.dpu: driver probed [ 2.916972] imx-drm display-subsystem: bound imx-drm-dpu-bliteng.2 (ops dpu_bliteng_ops) [ 2.925738] imx-drm display-subsystem: bound imx-dpu-crtc.0 (ops dpu_crtc_ops) [ 2.933538] imx-drm display-subsystem: bound imx-dpu-crtc.1 (ops dpu_crtc_ops) [ 2.935596] imx6q-pcie 5f010000.pcie: PCIe PLL locked after 0 us. [ 2.946975] imx6q-pcie 5f010000.pcie: host bridge /bus@5f000000/pcie@0x5f010000 ranges: [ 2.955048] imx6q-pcie 5f010000.pcie: IO 0x007ff80000..0x007ff8ffff -> 0x0000000000 [ 2.963285] imx6q-pcie 5f010000.pcie: MEM 0x0070000000..0x007fefffff -> 0x0070000000 [ 3.015994] mmc1: CQHCI version 5.10 [ 3.017027] imx-rproc imx8x_cm4@0: mbox_request_channel_byname() could not locate channel named "txdb" [ 3.019622] sdhci-esdhc-imx 5b020000.mmc: voltage-ranges unspecified [ 3.028944] imx-rproc imx8x_cm4@0: No txdb, ret -22 [ 3.035344] sdhci-esdhc-imx 5b020000.mmc: Got CD GPIO [ 3.040971] remoteproc remoteproc0: imx-rproc is available [ 3.045293] sdhci-esdhc-imx 5b020000.mmc: Got WP GPIO [ 3.082549] debugfs: File 'Playback' in directory 'dapm' already present! [ 3.087774] mmc1: SDHCI controller on 5b020000.mmc [5b020000.mmc] using ADMA [ 3.089395] debugfs: File 'Capture' in directory 'dapm' already present! [ 3.243691] cs42xx8 16-0048: failed to get device ID, ret = -5 [ 3.249968] cs42xx8: probe of 16-0048 failed with error -5 [ 3.267005] imx-lpi2c 56226000.i2c: can't get the TX DMA channel, error -19! [ 3.274103] imx-lpi2c 56226000.i2c: error -ENODEV: dma setup error -19, use pio [ 3.337734] it6263 22-004c: Probe failed. Remote port 'lvds-channel@0' disabled [ 3.345734] adv7511 22-003d: supply avdd not found, using dummy regulator [ 3.352678] adv7511 22-003d: supply dvdd not found, using dummy regulator [ 3.359538] adv7511 22-003d: supply pvdd not found, using dummy regulator [ 3.366400] adv7511 22-003d: supply a2vdd not found, using dummy regulator [ 3.373335] adv7511 22-003d: supply v3p3 not found, using dummy regulator [ 3.380190] adv7511 22-003d: supply v1p2 not found, using dummy regulator [ 3.387587] adv7511 22-003d: Probe failed. Remote port 'dsi_host@56228000' disabled [ 3.389325] mmc1: new ultra high speed SDR104 SDHC card at address 59b4 [ 3.395409] i2c i2c-22: LPI2C adapter registered [ 3.402560] mmcblk1: mmc1:59b4 SDU1 29.5 GiB [ 3.407762] imx-lpi2c 56246000.i2c: can't get the TX DMA channel, error -19! [ 3.412717] mmcblk1: p1 p2 [ 3.418057] imx-lpi2c 56246000.i2c: error -ENODEV: dma setup error -19, use pio [ 3.483753] it6263 23-004c: Probe failed. Remote port 'lvds-channel@0' disabled [ 3.491783] adv7511 23-003d: supply avdd not found, using dummy regulator [ 3.498784] adv7511 23-003d: supply dvdd not found, using dummy regulator [ 3.505648] adv7511 23-003d: supply pvdd not found, using dummy regulator [ 3.512520] adv7511 23-003d: supply a2vdd not found, using dummy regulator [ 3.519467] adv7511 23-003d: supply v3p3 not found, using dummy regulator [ 3.526353] adv7511 23-003d: supply v1p2 not found, using dummy regulator [ 3.534052] adv7511 23-003d: Probe failed. Remote port 'dsi_host@56248000' disabled [ 3.541889] i2c i2c-23: LPI2C adapter registered [ 3.548629] imx-drm display-subsystem: bound imx-drm-dpu-bliteng.2 (ops dpu_bliteng_ops) [ 3.557070] imx-drm display-subsystem: bound imx-dpu-crtc.0 (ops dpu_crtc_ops) [ 3.564571] imx-drm display-subsystem: bound imx-dpu-crtc.1 (ops dpu_crtc_ops) [ 3.572314] imx-drm display-subsystem: bound bus@56220000:ldb@562210e0 (ops imx8qxp_ldb_ops) [ 3.580808] imx-drm display-subsystem: bound 56228000.dsi_host (ops nwl_dsi_component_ops) [ 3.589512] imx-drm display-subsystem: bound bus@56220000:ldb@562410e0 (ops imx8qxp_ldb_ops) [ 3.598005] imx-drm display-subsystem: bound 56248000.dsi_host (ops nwl_dsi_component_ops) [ 3.606735] [drm] Initialized imx-drm 1.0.0 20120507 for display-subsystem on minor 1 [ 3.640196] isi-m2m 58100000.isi:m2m_device: Register m2m success for ISI.0 [ 3.651493] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.661286] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.667950] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 3.676589] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db [ 3.690574] ALSA device list: [ 3.693573] #0: imx-audmix [ 3.696487] #1: bt-sco-audio [ 3.699559] #2: wm8960-audio [ 3.971643] imx6q-pcie 5f010000.pcie: Phy link never came up [ 3.977777] imx6q-pcie 5f010000.pcie: failed to initialize host [ 3.983751] imx6q-pcie 5f010000.pcie: unable to add pcie port. [ 4.091399] EXT4-fs (mmcblk1p2): recovery complete [ 4.098849] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 4.107055] VFS: Mounted root (ext4 filesystem) on device 179:98. [ 4.113970] devtmpfs: mounted [ 4.118183] Freeing unused kernel memory: 2880K [ 4.122831] Run /sbin/init as init process [ 4.293752] systemd[1]: System time before build time, advancing clock. [ 4.323314] systemd[1]: systemd 247.6+ running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -ZSTD -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid) [ 4.346148] systemd[1]: Detected architecture arm64. Welcome to NXP i.MX Release Distro 5.10-hardknott (hardknott)! [ 4.396547] systemd[1]: Set hostname to . [ 4.469256] systemd-sysv-generator[219]: SysV service '/etc/init.d/rc.local' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.493626] systemd-sysv-generator[219]: SysV service '/etc/init.d/sendsigs' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.518030] systemd-sysv-generator[219]: SysV service '/etc/init.d/umountnfs.sh' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.542681] systemd-sysv-generator[219]: SysV service '/etc/init.d/save-rtc.sh' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.568718] systemd-sysv-generator[219]: SysV service '/etc/init.d/single' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.593320] systemd-sysv-generator[219]: SysV service '/etc/init.d/halt' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.617116] systemd-sysv-generator[219]: SysV service '/etc/init.d/umountfs' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 4.641211] systemd-sysv-generator[219]: SysV service '/etc/init.d/reboot' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. [ 5.033731] systemd[1]: Queued start job for default target Graphical Interface. [ 5.042657] random: systemd: uninitialized urandom read (16 bytes read) [ 5.116804] systemd[1]: Created slice system-getty.slice. [ OK ] Created slice system-getty.slice. [ 5.139748] random: systemd: uninitialized urandom read (16 bytes read) [ 5.148581] systemd[1]: Created slice system-modprobe.slice. [ OK ] Created slice system-modprobe.slice. [ 5.172025] random: systemd: uninitialized urandom read (16 bytes read) [ 5.181041] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ 5.205925] systemd[1]: Created slice User and Session Slice. [ OK ] Created slice User and Session Slice. [ 5.228102] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ OK ] Started Dispatch Password …ts to Console Directory Watch. [ 5.251992] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ OK ] Started Forward Password R…uests to Wall Directory Watch. [ 5.276133] systemd[1]: Reached target Host and Network Name Lookups. [ OK ] Reached target Host and Network Name Lookups. [ 5.300029] systemd[1]: Reached target Paths. [ OK ] Reached target Paths. [ 5.319753] systemd[1]: Reached target Remote File Systems. [ OK ] Reached target Remote File Systems. [ 5.339770] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 5.359821] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 5.385275] systemd[1]: Listening on RPCbind Server Activation Socket. [ OK ] Listening on RPCbind Server Activation Socket. [ 5.408116] systemd[1]: Reached target RPC Port Mapper. [ OK ] Reached target RPC Port Mapper. [ 5.428849] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 5.448107] systemd[1]: Listening on initctl Compatibility Named Pipe. [ OK ] Listening on initctl Compatibility Named Pipe. [ 5.472974] systemd[1]: Listening on Journal Audit Socket. [ OK ] Listening on Journal Audit Socket. [ 5.496581] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 5.520739] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 5.540477] systemd[1]: Listening on Network Service Netlink Socket. [ OK ] Listening on Network Service Netlink Socket. [ 5.565472] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 5.588600] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 5.612624] systemd[1]: Listening on User Database Manager Socket. [ OK ] Listening on User Database Manager Socket. [ 5.641028] systemd[1]: Mounting Huge Pages File System... Mounting Huge Pages File System... [ 5.668612] systemd[1]: Mounting POSIX Message Queue File System... Mounting POSIX Message Queue File System... [ 5.696765] systemd[1]: Mounting Kernel Debug File System... Mounting Kernel Debug File System... [ 5.720465] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 5.733802] systemd[1]: Mounting Temporary Directory (/tmp)... Mounting Temporary Directory (/tmp)... [ 5.763075] systemd[1]: Starting Create list of static device nodes for the current kernel... Starting Create list of st…odes for the current kernel... [ 5.793599] systemd[1]: Starting Load Kernel Module configfs... Starting Load Kernel Module configfs... [ 5.821038] systemd[1]: Starting Load Kernel Module drm... Starting Load Kernel Module drm... [ 5.849032] systemd[1]: Starting Load Kernel Module fuse... Starting Load Kernel Module fuse... [ 5.864512] fuse: init (API version 7.32) [ 5.876483] systemd[1]: Starting RPC Bind... Starting RPC Bind... [ 5.895979] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 5.906051] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 5.919069] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 5.933339] systemd[1]: Starting Journal Service... Starting Journal Service... [ 5.953504] systemd[1]: Condition check resulted in Load Kernel Modules being skipped. [ 5.965808] systemd[1]: Starting Remount Root and Kernel File Systems... Starting Remount Root and Kernel File Systems... [ 5.986789] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null) [ 6.003710] systemd[1]: Starting Apply Kernel Variables... Starting Apply Kernel Variables... [ 6.028052] systemd[1]: Starting Coldplug All udev Devices... Starting Coldplug All udev Devices... [ 6.052034] systemd[1]: Starting Setup Virtual Console... Starting Setup Virtual Console... [ 6.080478] systemd[1]: Started RPC Bind. [ OK ] Started RPC Bind. [ 6.100297] systemd[1]: Started Journal Service. [ OK ] Started Journal Service. [ OK ] Mounted Huge Pages File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Kernel Debug File System. [ OK ] Mounted Temporary Directory (/tmp). [ OK ] Finished Create list of st… nodes for the current kernel. [ OK ] Finished Load Kernel Module configfs. [ OK ] Finished Load Kernel Module drm. [ OK ] Finished Load Kernel Module fuse. [ OK ] Finished Remount Root and Kernel File Systems. [ OK ] Finished Apply Kernel Variables. [ OK ] Finished Setup Virtual Console. Mounting FUSE Control File System... Mounting Kernel Configuration File System... Starting Flush Journal to Persistent Storage... [ 6.380675] systemd-journald[230]: Received client request to flush runtime journal. Starting Create Static Device Nodes in /dev... [ OK ] Mounted FUSE Control File System. [ OK ] Mounted Kernel Configuration File System. [ OK ] Finished Flush Journal to Persistent Storage. [ OK ] Finished Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). Mounting /var/volatile... Starting Rule-based Manage…for Device Events and Files... [ OK ] Mounted /var/volatile. Starting Load/Save Random Seed... [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ OK ] Started Rule-based Manager for Device Events and Files. [ OK ] Finished Create Volatile Files and Directories. Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ OK ] Finished Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Set. [ OK ] Reached target System Time Synchronized. [ OK ] Finished Coldplug All udev Devices 7.302975] [VPU Encoder] enable mu for core[0] 0m. [ OK ] Reached target System Initialization[ 7.321055] [VPU Encoder] vpu encoder core[0] firmware version is 1.3.1 . [ OK ] Started Daily rotation of log files caam 31400000.crypto: device ID = 0x0a16040000000100 (Era 9) [0m. [ 7.349151] caam 31400000.crypto: job rings = 2, qi = 0 [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ 7.430658] imx8_media_dev: module is from the staging directory, the quality is unknown, you have been warned. [ OK ] Listening on dropbear.socket. [ 7.454671] mx8-img-md: Registered mxc_isi.0.capture as /dev/video1 [ 7.464530] mx8-img-md: Registered mxc_isi.1.capture as /dev/video2 Starting Weston socket. [ 7.488499] mx8-img-md: Registered mxc_isi.2.capture as /dev/video3 Starting Console System Startup Logging... [ 7.507350] mx8-img-md: Registered mxc_isi.3.capture as /dev/video4 Starting Start Psplash Boot Screen... [ 7.533732] mx8-img-md: Registered mxc_isi.4.capture as /dev/video5 [ OK ] Listening on Weston socket.[ 7.544903] unregister ISI channel: mxc_isi.0 [ 7.554285] CAN device driver interface [ 7.554918] unregister ISI channel: mxc_isi.1 [ 7.563286] unregister ISI channel: mxc_isi.2 [ OK ] Finished Console System Startup Logg[ 7.575856] unregister ISI channel: mxc_isi.3 ing. [ 7.582652] unregister ISI channel: mxc_isi.4 [ OK ] Started Start Psplash Boot Screen. [ OK ] Reached target Sockets. [ 7.659886] fsl-audmix 59840000.amix: Started TDM1 needed for config propagation! [ OK ] Reached target Basic System. [ OK ] Started Job spooling tools.[ 7.699734] mxc-jpeg 58400000.jpegdec: decoder device registered as /dev/video1 (81,3) [ OK ] Started Periodic Command Scheduler. [ OK ] Started D-Bus System Message Bus. [ 7.755787] mxc-jpeg 58450000.jpegenc: encoder device registered as /dev/video2 (81,4) [ OK ] Started Configuration for i.MX GPU (Former rc_gpu.S). Starting IPv6 Packet Filtering Framework... Starting IPv4 Packet Filtering Framework... Starting Network Time Service (one-shot ntpdate mode)... Starting Telephony service... [ OK ] Started Updates psplash to basic. [ OK ] Started Start psplash-syst…progress communication helper. [ OK ] Started System Logging Service. Starting User Login Management... [ OK ] Started TEE Supplicant. [ OK ] Finished IPv6 Packet Filtering Framework. [ OK ] Finished IPv4 Packet Filtering Framework. [ OK ] Finished Network Time Service (one-shot ntpdate mode). [ OK ] Finished Load/Save Random Seed. [ OK ] Started User Login Management. [ OK ] Started Telephony service. [ OK ] Created slice system-systemd\x2dbacklight.slice. [ OK ] Reached target Network (Pre). [ OK ] Reached target Hardware activated USB gadget. Starting Save/Restore Sound Card State... Starting Connection service... Starting Load/Save Screen … backlight:lvds_backlight@0... Starting Load/Save Screen … backlight:lvds_backlight@1... Starting Network Service... [ OK ] Finished Save/Restore Sound Card State. [ OK ] Finished Load/Save Screen …of backlight:lvds_backlight@0. [ OK ] Finished Load/Save Screen …of backlight:lvds_backlight@1. [ OK ] Started Connection service. [ OK ] Reached target Sound Card. Starting Avahi mDNS/DNS-SD Stack... Starting Hostname Service... Starting WPA supplicant... [ OK ] Started Network Service. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started WPA supplicant. [ OK ] Reached target Network. [ OK ] Started NFS status monitor for NFSv2/3 locking.. [ OK ] Started Respond to IPv6 Node Information Queries. [ OK ] Started Update psplash to network. Starting Terminate Psplash Boot Screen... Starting /etc/rc.local Compatibility... [ OK ] Started Network Router Discovery Daemon. Starting Permit User Sessions... [FAILED] Failed to start Terminate Psplash Boot Screen. See 'systemctl status psplash-quit.service' for details. [ OK ] Started /etc/rc.local Compatibility. [ OK ] Finished Permit User Sessions. [ OK ] Started Hostname Service. [ OK ] Created slice system-systemd\x2dfsck.slice. [ OK ] Started Getty on tty1. [ OK ] Started Serial Getty on ttyLP0. [ OK ] Reached target Login Prompts. [ OK ] Reached target Multi-User System. Starting Weston, a Wayland…ositor, as a system service... [ OK ] Found device /dev/mmcblk1p1. Starting File System Check on /dev/mmcblk1p1... Starting User Database Manager... [ OK ] Finished File System Check on /dev/mmcblk1p1. Mounting /run/media/mmcblk1p1... [ OK ] Started User Database Manager. [ OK ] Mounted /run/media/mmcblk1p1. [ OK ] Created slice User Slice of UID 0. Starting User Runtime Directory /run/user/0... [ OK ] Finished User Runtime Directory /run/user/0. Starting User Manager for UID 0... [ 9.953675] audit: type=1006 audit(1616581523.656:2): pid=589 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=1 res=1 [ OK ] Started User Manager for UID 0. [ OK ] Started Session c1 of user root. [ 10.534799] audit: type=1006 audit(1616581524.236:3): pid=579 uid=0 old-auid=4294967295 auid=0 tty=tty7 old-ses=4294967295 ses=2 res=1 [FAILED] Failed to start Weston, a …mpositor, as a system service. See 'systemctl status weston.service' for details. [ OK ] Reached target Graphical Interface. Starting Update UTMP about System Runlevel Changes... [ OK ] Finished Update UTMP about System Runlevel Changes. NXP i.MX Release Distro 5.10-hardknott imx8qxpc0mek ttyLP0 imx8qxpc0mek login: root root@imx8qxpc0mek:~# ;80R ifconfig -a eth0: flags=-28669 mtu 1500 ether 00:04:9f:06:a5:7f txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 92 bytes 7826 (7.6 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 92 bytes 7826 (7.6 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 root@imx8qxpc0mek:~# root@imx8qxpc0mek:~# [ 33.859605] usb_otg1_vbus: disabling root@imx8qxpc0mek:~# root@imx8qxpc0mek:~# grep dmesg | grep can [ 2.490242] imx-lpi2c 37230000.i2c: can't get the TX DMA channel, error -19! [ 2.638683] imx-lpi2c 5a810000.i2c: can't get the TX DMA channel, error -19! [ 2.820064] imx-lpi2c 58226000.i2c: can't get the TX DMA channel, error -19! [ 3.267005] imx-lpi2c 56226000.i2c: can't get the TX DMA channel, error -19! [ 3.407762] imx-lpi2c 56246000.i2c: can't get the TX DMA channel, error -19! root@imx8qxpc0mek:~# root@imx8qxpc0mek:~#