Starting 3rd party flash programming...
GDI: Mtwks Callback(MTWKS_CB_PROJECTACCESS, Section : STARTUP, Entry : SPECIFY_NETWORKCARD_ENABLED, Value : 0, R) => DI_OK
INF: Copyright 2017 P&E Microcomputer Systems,Inc.
INF: Command Line :"C:\Freescale\CW MCU v11.1\eclipse\..\MCU\bin\de.exe" -noni -language en -ORBendPoint giop:tcp:127.0.0.1: -ORBtraceLevel 0 
GDI: Mtwks Callback(MTWKS_CB_PROJECTACCESS, Section : PEDEBUG, Entry : IS_GDB_CONFIG, Value : 0, R) => DI_ERR_NONFATAL
INF: CMD>RE
INF: Frequency change to ~4009433hz.
INF: Initializing.
INF: Target has been RESET and is active.
INF: CMD>CM C:\Freescale\CW MCU v11.1\MCU\bin\Plugins\support\hc08\gdi\P&E\ntm88_lib.s8p
INF: Initializing.
INF: (Bus Freq = 4007KHz)
INF: Initialized.
INF: ;version 1.02, 06/05/2018, Copyright P&E Microcomputer Systems, www.pemicro.com [FXTH880000_LIB]
INF: ;device Freescale, NTM88_LIB, All
INF: ;begin_cs 
INF: Loading programming algorithm ... 
INF: WARNING - Selected .S8P file has been modified. CRC16 = $BC7D 
INF: Done.(FCDIV=$95)
INF: Programming sequency is : erase, blank check, program, and verify {default}
INF: CMD>VC
INF: Verifying object file Checksum16+CRC8 to device ranges ... 
INF:    block 0000C000-0000D603 ... 
INF: Ok.
INF:    block 0000D600-0000D805 ... 
INF: Calculated Checksum16+CRC8 does not match block. (File = $F1D3DA, Device = $C5E330)
INF: CMD>EM
INF: Preserving data range $0000FBC0-$0000FE3F before erase ... 
INF: Done.
INF: Erasing.
INF: Module has been erased.
INF: Re-programming preserved data range $0000FBC0-$0000FE3F ...      
INF:      Done.
INF: CMD>PM
INF: Programming and Verifying.
INF: Processing Object File Data ... 
INF: Error during programming.
ERR: Error Programming flash of device
ERR: Error occured during Flash programming.
INF: Device is Secure.
INF: Device is secured. Erasing ...
INF:  Done.

Executing Initialization File: C:\WORKSPACES\JAZZ_WORKSPACES\HWTS_WORKSPACE\HTWS-SW-08-Sources\TPMS\TPMS_Application\Project_Settings\Debugger\NTM88_LIB.tcl

Starting 3rd party flash programming...
GDI: Mtwks Callback(MTWKS_CB_PROJECTACCESS, Section : STARTUP, Entry : SPECIFY_NETWORKCARD_ENABLED, Value : 0, R) => DI_OK
INF: Copyright 2017 P&E Microcomputer Systems,Inc.
INF: Command Line :"C:\Freescale\CW MCU v11.1\eclipse\..\MCU\bin\de.exe" -noni -language en -ORBendPoint giop:tcp:127.0.0.1: -ORBtraceLevel 0 
GDI: Mtwks Callback(MTWKS_CB_PROJECTACCESS, Section : PEDEBUG, Entry : IS_GDB_CONFIG, Value : 0, R) => DI_ERR_NONFATAL
INF: CMD>RE
INF: Frequency change to ~4006074hz.
INF: Initializing.
INF: Target has been RESET and is active.
INF: CMD>CM C:\Freescale\CW MCU v11.1\MCU\bin\Plugins\support\hc08\gdi\P&E\ntm88_lib.s8p
INF: Initializing.
INF: (Bus Freq = 4006KHz)
INF: Initialized.
INF: ;version 1.02, 06/05/2018, Copyright P&E Microcomputer Systems, www.pemicro.com [FXTH880000_LIB]
INF: ;device Freescale, NTM88_LIB, All
INF: ;begin_cs 
INF: Loading programming algorithm ... 
INF: Done.(FCDIV=$95)
INF: Programming sequency is : erase, blank check, program, and verify {default}
INF: CMD>VC
INF: Verifying object file Checksum16+CRC8 to device ranges ... 
INF:    block 0000C000-0000D603 ... 
INF: Calculated Checksum16+CRC8 does not match block. (File = $10BEE1, Device = $EDFCE8)
INF: CMD>EM
INF: Preserving data range $0000FFBF-$0000FFBF before erase ... 
INF: Done.
INF: Preserving data range $0000FBC0-$0000FE3F before erase ... 
INF: Done.
INF: Erasing.
INF: Module has been erased.
INF: Re-programming preserved data range $0000FFBF-$0000FFBF ...      
INF:      Done.
INF: Re-programming preserved data range $0000FBC0-$0000FE3F ...      
INF:      Done.
INF: CMD>PM
INF: Programming and Verifying.
INF: Processing Object File Data ... 
INF: Error during programming.
ERR: Error Programming flash of device
ERR: Error occured during Flash programming.

Executing Initialization File: C:\WORKSPACES\JAZZ_WORKSPACES\HWTS_WORKSPACE\HTWS-SW-08-Sources\TPMS\TPMS_Application\Project_Settings\Debugger\NTM88_LIB.tcl

Starting 3rd party flash programming...
GDI: Mtwks Callback(MTWKS_CB_PROJECTACCESS, Section : STARTUP, Entry : SPECIFY_NETWORKCARD_ENABLED, Value : 0, R) => DI_OK
INF: Copyright 2017 P&E Microcomputer Systems,Inc.
INF: Command Line :"C:\Freescale\CW MCU v11.1\eclipse\..\MCU\bin\de.exe" -noni -language en -ORBendPoint giop:tcp:127.0.0.1: -ORBtraceLevel 0 
GDI: Mtwks Callback(MTWKS_CB_PROJECTACCESS, Section : PEDEBUG, Entry : IS_GDB_CONFIG, Value : 0, R) => DI_ERR_NONFATAL
INF: CMD>RE
INF: Frequency change to ~4006074hz.
INF: Initializing.
INF: Target has been RESET and is active.
INF: CMD>CM C:\Freescale\CW MCU v11.1\MCU\bin\Plugins\support\hc08\gdi\P&E\ntm88_lib.s8p
INF: Initializing.
INF: (Bus Freq = 4004KHz)
INF: Initialized.
INF: ;version 1.02, 06/05/2018, Copyright P&E Microcomputer Systems, www.pemicro.com [FXTH880000_LIB]
INF: ;device Freescale, NTM88_LIB, All
INF: ;begin_cs 
INF: Loading programming algorithm ... 
INF: Done.(FCDIV=$95)
INF: Programming sequency is : erase, blank check, program, and verify {default}
INF: CMD>VC
INF: Verifying object file Checksum16+CRC8 to device ranges ... 
INF:    block 0000C000-0000D603 ... 
INF: Ok.
INF:    block 0000D600-0000D805 ... 
INF: Calculated Checksum16+CRC8 does not match block. (File = $F1D3DA, Device = $C5E330)
INF: CMD>EM
INF: Preserving data range $0000FFBF-$0000FFBF before erase ... 
INF: Done.
INF: Preserving data range $0000FBC0-$0000FE3F before erase ... 
INF: Done.
INF: Erasing.
INF: Module has been erased.
INF: Re-programming preserved data range $0000FFBF-$0000FFBF ...      
INF:      Done.
INF: Re-programming preserved data range $0000FBC0-$0000FE3F ...      
INF:      Done.
INF: CMD>PM
INF: Programming and Verifying.
INF: Processing Object File Data ... 
INF: Error during programming.
ERR: Error Programming flash of device
ERR: Error occured during Flash programming.