host 192.168.2.1 is alive => tftp 0x80d00000 nxa22585/lx2160ardb/dpl_sgmii_only.dtb Using e1000#0 device TFTP from server 192.168.2.1; our IP address is 192.168.2.180 Filename 'nxa22585/lx2160ardb/dpl_sgmii_only.dtb'. Load address: 0x80d00000 Loading: ## 4.8 MiB/s done Bytes transferred = 20214 (4ef6 hex) => fsl_mc lazyapply dpl 0x80d00000 => tftp 0xa0000000 nxa22585/lx2160ardb/lsdk2108_yocto_tiny_LS_arm64.itb Using e1000#0 device TFTP from server 192.168.2.1; our IP address is 192.168.2.180 Filename 'nxa22585/lx2160ardb/lsdk2108_yocto_tiny_LS_arm64.itb'. Load address: 0xa0000000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# #########################T ######################################## ################################### 3.9 MiB/s done Bytes transferred = 37724135 (23f9fe7 hex) => bootm 0xa0000000#lx2160ardb ## Loading kernel from FIT Image at a0000000 ... Using 'lx2160ardb' configuration Trying 'kernel' kernel subimage Description: ARM64 Kernel Created: 2021-08-27 14:16:52 UTC Type: Kernel Image Compression: gzip compressed Data Start: 0xa00000d0 Data Size: 15185058 Bytes = 14.5 MiB Architecture: AArch64 OS: Linux Load Address: 0x84080000 Entry Point: 0x84080000 Verifying Hash Integrity ... OK ## Loading ramdisk from FIT Image at a0000000 ... Using 'lx2160ardb' configuration Trying 'initrd' ramdisk subimage Description: initrd for arm64 Created: 2021-08-27 14:16:52 UTC Type: RAMDisk Image Compression: uncompressed Data Start: 0xa0e7b620 Data Size: 21968191 Bytes = 21 MiB Architecture: AArch64 OS: Linux Load Address: 0x00000000 Entry Point: 0x00000000 Verifying Hash Integrity ... OK ## Loading fdt from FIT Image at a0000000 ... Using 'lx2160ardb' configuration Trying 'lx2160ardb-dtb' fdt subimage Description: lx2160ardb-dtb Created: 2021-08-27 14:16:52 UTC Type: Flat Device Tree Compression: uncompressed Data Start: 0xa23d9dd4 Data Size: 41849 Bytes = 40.9 KiB Architecture: AArch64 Load Address: 0x90000000 Verifying Hash Integrity ... OK Loading fdt from 0xa23d9dd4 to 0x90000000 Booting using the fdt blob at 0x90000000 Uncompressing Kernel Image Loading Device Tree to 000000009fff2000, end 000000009ffff378 ... OK fsl-mc: Deploying data path layout ... WARNING: Firmware returned an error (GSR: 0x3f) Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083] [ 0.000000] Linux version 5.10.35 (jenkins@pluto) (aarch64-linux-gnu-gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1 SMP PREEMPT Fri Aug 27 22:03:58 CST 2021 [ 0.000000] Machine model: NXP Layerscape LX2160ARDB [ 0.000000] earlycon: pl11 at MMIO32 0x00000000021c0000 (options '') [ 0.000000] printk: bootconsole [pl11] enabled [ 0.000000] efi: UEFI not found. [ 0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader! [ 0.000000] cma: Reserved 32 MiB at 0x00000000f9c00000 [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x000000237fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x237e3e4b00-0x237e3e6fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x000000237fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000fbdfffff] [ 0.000000] node 0: [mem 0x0000002080000000-0x000000237fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000237fffffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 24 pages/cpu s60120 r8192 d29992 u98304 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: EL2 vector hardening [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3595776 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000f5c00000-0x00000000f9c00000] (64MB) [ 0.000000] Memory: 12067520K/14612480K available (20416K kernel code, 3074K rwdata, 9944K rodata, 6656K init, 1035K bss, 2512192K reserved, 32768K cma-reserved) [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 256 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000006200000 [ 0.000000] ITS [mem 0x06020000-0x0603ffff] [ 0.000000] ITS@0x0000000006020000: allocated 65536 Devices @2080080000 (flat, esz 8, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GICv3: Using preallocated redistributor tables [ 0.000000] GICv3: using LPI property table @0x0000000080000000 [ 0.000000] GICv3: CPU0: using reserved LPI pending table @0x0000000080010000 [ 0.000000] random: get_random_bytes called from start_kernel+0x32c/0x4f0 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c409fb33, max_idle_ns: 440795203156 ns [ 0.000001] sched_clock: 56 bits at 25MHz, resolution 39ns, wraps every 4398046511103ns [ 0.008576] Console: colour dummy device 80x25 [ 0.013115] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000) [ 0.023582] pid_max: default: 32768 minimum: 301 [ 0.028324] LSM: Security Framework initializing [ 0.033090] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.040785] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.049599] rcu: Hierarchical SRCU implementation. [ 0.054537] Platform MSI: gic-its@6020000 domain created [ 0.059961] PCI/MSI: /interrupt-controller@6000000/gic-its@6020000 domain created [ 0.067560] fsl-mc MSI: gic-its@6020000 domain created [ 0.073347] EFI services will not be available. [ 0.078223] smp: Bringing up secondary CPUs ... [ 0.083076] Detected PIPT I-cache on CPU1 [ 0.083092] GICv3: CPU1: found redistributor 1 region 0:0x0000000006220000 [ 0.083103] GICv3: CPU1: using reserved LPI pending table @0x0000000080020000 [ 0.083125] CPU1: Booted secondary processor 0x0000000001 [0x410fd083] [ 0.083419] Detected PIPT I-cache on CPU2 [ 0.083435] GICv3: CPU2: found redistributor 100 region 0:0x0000000006240000 [ 0.083447] GICv3: CPU2: using reserved LPI pending table @0x0000000080030000 [ 0.083472] CPU2: Booted secondary processor 0x0000000100 [0x410fd083] [ 0.083776] Detected PIPT I-cache on CPU3 [ 0.083787] GICv3: CPU3: found redistributor 101 region 0:0x0000000006260000 [ 0.083798] GICv3: CPU3: using reserved LPI pending table @0x0000000080040000 [ 0.083817] CPU3: Booted secondary processor 0x0000000101 [0x410fd083] [ 0.084106] Detected PIPT I-cache on CPU4 [ 0.084121] GICv3: CPU4: found redistributor 200 region 0:0x0000000006280000 [ 0.084133] GICv3: CPU4: using reserved LPI pending table @0x0000000080050000 [ 0.084156] CPU4: Booted secondary processor 0x0000000200 [0x410fd083] [ 0.084455] Detected PIPT I-cache on CPU5 [ 0.084468] GICv3: CPU5: found redistributor 201 region 0:0x00000000062a0000 [ 0.084478] GICv3: CPU5: using reserved LPI pending table @0x0000000080060000 [ 0.084497] CPU5: Booted secondary processor 0x0000000201 [0x410fd083] [ 0.084783] Detected PIPT I-cache on CPU6 [ 0.084800] GICv3: CPU6: found redistributor 300 region 0:0x00000000062c0000 [ 0.084812] GICv3: CPU6: using reserved LPI pending table @0x0000000080070000 [ 0.084836] CPU6: Booted secondary processor 0x0000000300 [0x410fd083] [ 0.085129] Detected PIPT I-cache on CPU7 [ 0.085143] GICv3: CPU7: found redistributor 301 region 0:0x00000000062e0000 [ 0.085154] GICv3: CPU7: using reserved LPI pending table @0x0000000080080000 [ 0.085172] CPU7: Booted secondary processor 0x0000000301 [0x410fd083] [ 0.085459] Detected PIPT I-cache on CPU8 [ 0.085477] GICv3: CPU8: found redistributor 400 region 0:0x0000000006300000 [ 0.085489] GICv3: CPU8: using reserved LPI pending table @0x0000000080090000 [ 0.085514] CPU8: Booted secondary processor 0x0000000400 [0x410fd083] [ 0.085805] Detected PIPT I-cache on CPU9 [ 0.085821] GICv3: CPU9: found redistributor 401 region 0:0x0000000006320000 [ 0.085831] GICv3: CPU9: using reserved LPI pending table @0x00000000800a0000 [ 0.085851] CPU9: Booted secondary processor 0x0000000401 [0x410fd083] [ 0.086144] Detected PIPT I-cache on CPU10 [ 0.086164] GICv3: CPU10: found redistributor 500 region 0:0x0000000006340000 [ 0.086176] GICv3: CPU10: using reserved LPI pending table @0x00000000800b0000 [ 0.086201] CPU10: Booted secondary processor 0x0000000500 [0x410fd083] [ 0.086495] Detected PIPT I-cache on CPU11 [ 0.086513] GICv3: CPU11: found redistributor 501 region 0:0x0000000006360000 [ 0.086523] GICv3: CPU11: using reserved LPI pending table @0x00000000800c0000 [ 0.086542] CPU11: Booted secondary processor 0x0000000501 [0x410fd083] [ 0.086837] Detected PIPT I-cache on CPU12 [ 0.086859] GICv3: CPU12: found redistributor 600 region 0:0x0000000006380000 [ 0.086871] GICv3: CPU12: using reserved LPI pending table @0x00000000800d0000 [ 0.086897] CPU12: Booted secondary processor 0x0000000600 [0x410fd083] [ 0.087186] Detected PIPT I-cache on CPU13 [ 0.087205] GICv3: CPU13: found redistributor 601 region 0:0x00000000063a0000 [ 0.087216] GICv3: CPU13: using reserved LPI pending table @0x00000000800e0000 [ 0.087236] CPU13: Booted secondary processor 0x0000000601 [0x410fd083] [ 0.087530] Detected PIPT I-cache on CPU14 [ 0.087553] GICv3: CPU14: found redistributor 700 region 0:0x00000000063c0000 [ 0.087566] GICv3: CPU14: using reserved LPI pending table @0x00000000800f0000 [ 0.087591] CPU14: Booted secondary processor 0x0000000700 [0x410fd083] [ 0.087884] Detected PIPT I-cache on CPU15 [ 0.087904] GICv3: CPU15: found redistributor 701 region 0:0x00000000063e0000 [ 0.087915] GICv3: CPU15: using reserved LPI pending table @0x0000000080100000 [ 0.087934] CPU15: Booted secondary processor 0x0000000701 [0x410fd083] [ 0.087973] smp: Brought up 1 node, 16 CPUs [ 0.468706] SMP: Total of 16 processors activated. [ 0.473548] CPU features: detected: 32-bit EL0 Support [ 0.478745] CPU features: detected: CRC32 instructions [ 0.483937] CPU features: detected: 32-bit EL1 Support [ 0.503741] CPU: All CPU(s) started at EL2 [ 0.507911] alternatives: patching kernel code [ 0.513181] devtmpfs: initialized [ 0.519252] KASLR enabled [ 0.521972] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.531828] futex hash table entries: 4096 (order: 6, 262144 bytes, linear) [ 0.539245] pinctrl core: initialized pinctrl subsystem [ 0.544977] DMI not present or invalid. [ 0.549074] NET: Registered protocol family 16 [ 0.554386] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.561903] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.570260] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.578369] audit: initializing netlink subsys (disabled) [ 0.583897] audit: type=2000 audit(0.380:1): state=initialized audit_enabled=0 res=1 [ 0.584285] thermal_sys: Registered thermal governor 'step_wise' [ 0.591731] thermal_sys: Registered thermal governor 'power_allocator' [ 0.598224] cpuidle: using governor menu [ 0.608968] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.615980] ASID allocator initialised with 32768 entries [ 0.621971] Serial: AMBA PL011 UART driver [ 0.626151] imx mu driver is registered. [ 0.630126] imx rpmsg driver is registered. [ 0.642029] Machine: NXP Layerscape LX2160ARDB [ 0.646521] SoC family: QorIQ LX2160A [ 0.650215] SoC ID: svr:0x87360020, Revision: 2.0 [ 0.655518] 21c0000.serial: ttyAMA0 at MMIO 0x21c0000 (irq = 26, base_baud = 0) is a SBSA [ 0.663790] printk: console [ttyAMA0] enabled [ 0.663790] printk: console [ttyAMA0] enabled [ 0.672531] printk: bootconsole [pl11] disabled [ 0.672531] printk: bootconsole [pl11] disabled [ 0.681832] sbsa-uart 21d0000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable. [ 0.694778] 21d0000.serial: ttyAMA1 at MMIO 0x21d0000 (irq = 27, base_baud = 0) is a SBSA [ 0.705165] fsl_mc_bus 80c000000.fsl-mc: MC firmware version: 10.30.0 [ 0.714143] fsl_mc_dprc dprc.1: DMA mask not set [ 0.730862] HugeTLB registered 1.00 GiB page size, pre-allocated 2 pages [ 0.737569] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.744260] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.750950] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.758569] cryptd: max_cpu_qlen set to 1000 [ 0.829911] raid6: neonx8 gen() 5736 MB/s [ 0.901941] raid6: neonx8 xor() 4257 MB/s [ 0.973973] raid6: neonx4 gen() 5857 MB/s [ 1.046013] raid6: neonx4 xor() 4411 MB/s [ 1.118036] raid6: neonx2 gen() 5201 MB/s [ 1.190064] raid6: neonx2 xor() 4042 MB/s [ 1.262097] raid6: neonx1 gen() 4030 MB/s [ 1.334123] raid6: neonx1 xor() 3225 MB/s [ 1.406152] raid6: int64x8 gen() 3334 MB/s [ 1.478178] raid6: int64x8 xor() 1949 MB/s [ 1.550212] raid6: int64x4 gen() 3334 MB/s [ 1.622238] raid6: int64x4 xor() 1983 MB/s [ 1.694267] raid6: int64x2 gen() 3136 MB/s [ 1.766293] raid6: int64x2 xor() 1755 MB/s [ 1.838325] raid6: int64x1 gen() 2433 MB/s [ 1.910356] raid6: int64x1 xor() 1305 MB/s [ 1.914615] raid6: using algorithm neonx4 gen() 5857 MB/s [ 1.920002] raid6: .... xor() 4411 MB/s, rmw enabled [ 1.924956] raid6: using neon recovery algorithm [ 1.929815] ACPI: Interpreter disabled. [ 1.934359] iommu: Default domain type: Passthrough [ 1.939393] vgaarb: loaded [ 1.942230] SCSI subsystem initialized [ 1.946115] usbcore: registered new interface driver usbfs [ 1.951606] usbcore: registered new interface driver hub [ 1.956923] usbcore: registered new device driver usb [ 1.962167] imx-i2c 2000000.i2c: can't get pinctrl, bus recovery not supported [ 1.969520] i2c i2c-0: IMX I2C adapter registered [ 1.974339] imx-i2c 2040000.i2c: can't get pinctrl, bus recovery not supported [ 1.981641] i2c i2c-1: IMX I2C adapter registered [ 1.986554] mc: Linux media interface: v0.10 [ 1.990835] videodev: Linux video capture interface: v2.00 [ 1.996337] pps_core: LinuxPPS API ver. 1 registered [ 2.001298] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.010432] PTP clock support registered [ 2.014388] EDAC MC: Ver: 3.0.0 [ 2.017997] No BMan portals available! [ 2.021902] QMan: Allocated lookup table at (____ptrval____), entry count 65537 [ 2.029291] No QMan portals available! [ 2.033152] No USDPAA memory, no 'fsl,usdpaa-mem' in device-tree [ 2.039376] FPGA manager framework [ 2.042802] Advanced Linux Sound Architecture Driver Initialized. [ 2.049456] clocksource: Switched to clocksource arch_sys_counter [ 2.055642] VFS: Disk quotas dquot_6.6.0 [ 2.059588] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.066535] pnp: PnP ACPI: disabled [ 2.072752] NET: Registered protocol family 2 [ 2.077359] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 2.086066] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 2.094550] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 2.102343] TCP: Hash tables configured (established 131072 bind 65536) [ 2.109038] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 2.115972] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 2.123427] NET: Registered protocol family 1 [ 2.127965] RPC: Registered named UNIX socket transport module. [ 2.133883] RPC: Registered udp transport module. [ 2.138586] RPC: Registered tcp transport module. [ 2.143282] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.149716] PCI: CLS 0 bytes, default 64 [ 2.153695] Trying to unpack rootfs image as initramfs... [ 2.607142] Freeing initrd memory: 21448K [ 2.612048] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 2.620378] kvm [1]: IPA Size Limit: 44 bits [ 2.625276] kvm [1]: vgic-v2@c0e0000 [ 2.628859] kvm [1]: GIC system register CPU interface enabled [ 2.634878] kvm [1]: vgic interrupt IRQ9 [ 2.638998] kvm [1]: Hyp mode initialized successfully [ 2.646201] Initialise system trusted keyrings [ 2.650705] workingset: timestamp_bits=42 max_order=22 bucket_order=0 [ 2.657592] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.663556] NFS: Registering the id_resolver key type [ 2.668608] Key type id_resolver registered [ 2.672783] Key type id_legacy registered [ 2.676796] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.683488] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 2.690882] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 2.697084] fuse: init (API version 7.32) [ 2.701168] 9p: Installing v9fs 9p2000 file system support [ 2.726054] xor: measuring software checksum speed [ 2.732014] 8regs : 8380 MB/sec [ 2.737377] 32regs : 9688 MB/sec [ 2.742872] arm64_neon : 8569 MB/sec [ 2.747218] xor: using function: 32regs (9688 MB/sec) [ 2.752262] Key type asymmetric registered [ 2.756348] Asymmetric key parser 'x509' registered [ 2.761229] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 2.768682] io scheduler mq-deadline registered [ 2.773208] io scheduler kyber registered [ 2.781253] layerscape-pcie 3600000.pcie: host bridge /soc/pcie@3600000 ranges: [ 2.788568] layerscape-pcie 3600000.pcie: MEM 0x9040000000..0x907fffffff -> 0x0040000000 [ 2.797167] layerscape-pcie 3600000.pcie: PCI host bridge to bus 0000:00 [ 2.803863] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.809341] pci_bus 0000:00: root bus resource [mem 0x9040000000-0x907fffffff] (bus address [0x40000000-0x7fffffff]) [ 2.819871] pci 0000:00:00.0: [1957:8d80] type 01 class 0x060400 [ 2.825931] pci 0000:00:00.0: supports D1 D2 [ 2.830192] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot [ 2.837541] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 2.842772] pci 0000:00:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256 [ 2.851317] layerscape-pcie 3800000.pcie: host bridge /soc/pcie@3800000 ranges: [ 2.858642] layerscape-pcie 3800000.pcie: MEM 0xa040000000..0xa07fffffff -> 0x0040000000 [ 2.867246] layerscape-pcie 3800000.pcie: PCI host bridge to bus 0001:00 [ 2.873942] pci_bus 0001:00: root bus resource [bus 00-ff] [ 2.879420] pci_bus 0001:00: root bus resource [mem 0xa040000000-0xa07fffffff] (bus address [0x40000000-0x7fffffff]) [ 2.889947] pci 0001:00:00.0: [1957:8d80] type 01 class 0x060400 [ 2.896018] pci 0001:00:00.0: supports D1 D2 [ 2.900280] pci 0001:00:00.0: PME# supported from D0 D1 D2 D3hot [ 2.907209] pci 0001:01:00.0: [8086:10d3] type 00 class 0x020000 [ 2.913406] pci 0001:01:00.0: reg 0x10: [mem 0xa040000000-0xa04001ffff] [ 2.920118] pci 0001:01:00.0: reg 0x14: [mem 0xa040080000-0xa0400fffff] [ 2.926828] pci 0001:01:00.0: reg 0x18: [io 0x1000-0x101f] [ 2.932498] pci 0001:01:00.0: reg 0x1c: [mem 0xa040100000-0xa040103fff] [ 2.939420] pci 0001:01:00.0: reg 0x30: [mem 0xa040140000-0xa04017ffff pref] [ 2.947220] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold [ 2.966148] pci 0001:00:00.0: BAR 14: assigned [mem 0xa040000000-0xa0400fffff] [ 2.973363] pci 0001:00:00.0: BAR 13: no space for [io size 0x1000] [ 2.979708] pci 0001:00:00.0: BAR 13: failed to assign [io size 0x1000] [ 2.986402] pci 0001:01:00.0: BAR 1: assigned [mem 0xa040000000-0xa04007ffff] [ 2.993572] pci 0001:01:00.0: BAR 6: assigned [mem 0xa040080000-0xa0400bffff pref] [ 3.001135] pci 0001:01:00.0: BAR 0: assigned [mem 0xa0400c0000-0xa0400dffff] [ 3.008292] pci 0001:01:00.0: BAR 3: assigned [mem 0xa0400e0000-0xa0400e3fff] [ 3.015448] pci 0001:01:00.0: BAR 2: no space for [io size 0x0020] [ 3.021707] pci 0001:01:00.0: BAR 2: failed to assign [io size 0x0020] [ 3.028313] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 3.033532] pci 0001:00:00.0: bridge window [mem 0xa040000000-0xa0400fffff] [ 3.040671] pci 0001:00:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256 [ 3.049251] pci 0001:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 256 [ 3.058211] EINJ: ACPI disabled. [ 3.064310] Bus freq driver module loaded [ 3.071109] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.078269] SuperH (H)SCI(F) driver initialized [ 3.082983] msm_serial: driver initialized [ 3.087860] arm-smmu 5000000.iommu: probing hardware configuration... [ 3.094294] arm-smmu 5000000.iommu: SMMUv2 with: [ 3.098902] arm-smmu 5000000.iommu: stage 1 translation [ 3.104205] arm-smmu 5000000.iommu: stage 2 translation [ 3.109507] arm-smmu 5000000.iommu: nested translation [ 3.114722] arm-smmu 5000000.iommu: coherent table walk [ 3.120025] arm-smmu 5000000.iommu: (IDR0.CTTW overridden by FW configuration) [ 3.127324] arm-smmu 5000000.iommu: stream matching with 128 register groups [ 3.134451] arm-smmu 5000000.iommu: 64 context banks (0 stage-2 only) [ 3.140970] arm-smmu 5000000.iommu: Supported page sizes: 0x61311000 [ 3.147401] arm-smmu 5000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA [ 3.153832] arm-smmu 5000000.iommu: Stage-2: 48-bit IPA -> 48-bit PA [ 3.165892] brd: module loaded [ 3.173278] loop: module loaded [ 3.176557] pci-endpoint-test 0000:00:00.0: Adding to iommu group 0 [ 3.182920] pci-endpoint-test 0001:00:00.0: Adding to iommu group 1 [ 3.189604] megasas: 07.714.04.00-rc1 [ 3.193827] imx ahci driver is registered. [ 3.198058] ahci-qoriq 3200000.sata: Adding to iommu group 2 [ 3.203742] ahci-qoriq 3200000.sata: supply ahci not found, using dummy regulator [ 3.211265] ahci-qoriq 3200000.sata: supply phy not found, using dummy regulator [ 3.218686] ahci-qoriq 3200000.sata: supply target not found, using dummy regulator [ 3.226394] ahci-qoriq 3200000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 3.235356] ahci-qoriq 3200000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst [ 3.245507] scsi host0: ahci-qoriq [ 3.249031] ata1: SATA max UDMA/133 mmio [mem 0x03200000-0x0320ffff] port 0x100 irq 34 [ 3.257002] ahci-qoriq 3210000.sata: Adding to iommu group 3 [ 3.262677] ahci-qoriq 3210000.sata: supply ahci not found, using dummy regulator [ 3.270194] ahci-qoriq 3210000.sata: supply phy not found, using dummy regulator [ 3.277601] ahci-qoriq 3210000.sata: supply target not found, using dummy regulator [ 3.285295] ahci-qoriq 3210000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 3.294248] ahci-qoriq 3210000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst [ 3.304163] scsi host1: ahci-qoriq [ 3.307632] ata2: SATA max UDMA/133 mmio [mem 0x03210000-0x0321ffff] port 0x100 irq 35 [ 3.315591] ahci-qoriq 3220000.sata: Adding to iommu group 4 [ 3.321267] ahci-qoriq 3220000.sata: supply ahci not found, using dummy regulator [ 3.328782] ahci-qoriq 3220000.sata: supply phy not found, using dummy regulator [ 3.336190] ahci-qoriq 3220000.sata: supply target not found, using dummy regulator [ 3.343884] ahci-qoriq 3220000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 3.352835] ahci-qoriq 3220000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst [ 3.362752] scsi host2: ahci-qoriq [ 3.366230] ata3: SATA max UDMA/133 mmio [mem 0x03220000-0x0322ffff] port 0x100 irq 36 [ 3.374191] ahci-qoriq 3230000.sata: Adding to iommu group 5 [ 3.379863] ahci-qoriq 3230000.sata: supply ahci not found, using dummy regulator [ 3.387379] ahci-qoriq 3230000.sata: supply phy not found, using dummy regulator [ 3.394786] ahci-qoriq 3230000.sata: supply target not found, using dummy regulator [ 3.402481] ahci-qoriq 3230000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 3.411433] ahci-qoriq 3230000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst [ 3.421340] scsi host3: ahci-qoriq [ 3.424807] ata4: SATA max UDMA/133 mmio [mem 0x03230000-0x0323ffff] port 0x100 irq 37 [ 3.433814] spi-nor spi0.0: mt35xu512aba (65536 Kbytes) [ 3.442112] spi-nor spi0.1: mt35xu512aba (65536 Kbytes) [ 3.462667] libphy: Fixed MDIO Bus: probed [ 3.467313] tun: Universal TUN/TAP device driver, 1.6 [ 3.472636] thunder_xcv, ver 1.0 [ 3.475876] thunder_bgx, ver 1.0 [ 3.479109] nicpf, ver 1.0 [ 3.482066] libphy: Freescale XGMAC MDIO Bus: probed [ 3.504861] libphy: Freescale XGMAC MDIO Bus: probed [ 3.510974] libphy: Freescale XGMAC MDIO Bus: probed [ 3.517050] libphy: Freescale XGMAC MDIO Bus: probed [ 3.523026] Freescale FM module, FMD API version 21.1.0 [ 3.528307] Freescale FM Ports module [ 3.531961] fsl_mac: fsl_mac: FSL FMan MAC API based driver [ 3.537568] fsl_dpa: FSL DPAA Ethernet driver [ 3.541950] fsl_advanced: FSL DPAA Advanced drivers: [ 3.546905] fsl_proxy: FSL DPAA Proxy initialization driver [ 3.552501] fsl_oh: FSL FMan Offline Parsing port driver [ 3.558112] hclge is initializing [ 3.561426] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 3.568639] hns3: Copyright (c) 2017 Huawei Corporation. [ 3.571570] ata1: SATA link down (SStatus 0 SControl 300) [ 3.573962] e1000: Intel(R) PRO/1000 Network Driver [ 3.584198] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 3.589952] e1000e: Intel(R) PRO/1000 Network Driver [ 3.594906] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.600890] e1000e 0001:01:00.0: Adding to iommu group 1 [ 3.606861] e1000e 0001:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.627605] ata2: SATA link down (SStatus 0 SControl 300) [ 3.665923] e1000e 0001:01:00.0 0001:01:00.0 (uninitialized): registered PHC clock [ 3.687605] ata3: SATA link down (SStatus 0 SControl 300) [ 3.727460] e1000e 0001:01:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1b:21:82:a0:ae [ 3.735377] e1000e 0001:01:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.742256] e1000e 0001:01:00.0 eth0: MAC: 3, PHY: 8, PBA No: E46981-004 [ 3.747615] ata4: SATA link down (SStatus 0 SControl 300) [ 3.748979] igb: Intel(R) Gigabit Ethernet Network Driver [ 3.759724] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.765305] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 3.771563] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 3.777637] sky2: driver version 1.30 [ 3.781673] usbcore: registered new interface driver r8152 [ 3.787164] usbcore: registered new interface driver asix [ 3.792566] usbcore: registered new interface driver ax88179_178a [ 3.798859] VFIO - User Level meta-driver version: 0.3 [ 3.804236] dwc3 3100000.usb: Adding to iommu group 6 [ 3.809651] dwc3 3110000.usb: Adding to iommu group 7 [ 3.815554] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.822080] ehci-pci: EHCI PCI platform driver [ 3.826528] ehci-platform: EHCI generic platform driver [ 3.831787] ehci-orion: EHCI orion driver [ 3.835825] ehci-exynos: EHCI Exynos driver [ 3.840036] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.846212] ohci-pci: OHCI PCI platform driver [ 3.850661] ohci-platform: OHCI generic platform driver [ 3.855918] ohci-exynos: OHCI Exynos driver [ 3.860257] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.865743] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 3.873462] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010810 [ 3.882865] xhci-hcd xhci-hcd.0.auto: irq 32, io mem 0x03100000 [ 3.889065] hub 1-0:1.0: USB hub found [ 3.892819] hub 1-0:1.0: 1 port detected [ 3.896848] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.902330] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 3.909981] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 3.916691] hub 2-0:1.0: USB hub found [ 3.920444] hub 2-0:1.0: 1 port detected [ 3.924511] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 3.929994] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 3.937697] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010810 [ 3.947095] xhci-hcd xhci-hcd.1.auto: irq 33, io mem 0x03110000 [ 3.953249] hub 3-0:1.0: USB hub found [ 3.957001] hub 3-0:1.0: 1 port detected [ 3.961017] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 3.966500] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 3.974150] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 3.980856] hub 4-0:1.0: USB hub found [ 3.984608] hub 4-0:1.0: 1 port detected [ 3.988819] usbcore: registered new interface driver uas [ 3.994158] usbcore: registered new interface driver usb-storage [ 4.001373] ftm-alarm 2800000.timer: registered as rtc1 [ 4.006941] i2c /dev entries driver [ 4.011581] i2c i2c-0: Added multiplexed i2c bus 2 [ 4.016447] i2c i2c-0: Added multiplexed i2c bus 3 [ 4.021409] i2c i2c-0: Added multiplexed i2c bus 4 [ 4.026435] i2c i2c-0: Added multiplexed i2c bus 5 [ 4.031297] i2c i2c-0: Added multiplexed i2c bus 6 [ 4.036159] i2c i2c-0: Added multiplexed i2c bus 7 [ 4.041016] i2c i2c-0: Added multiplexed i2c bus 8 [ 4.045875] i2c i2c-0: Added multiplexed i2c bus 9 [ 4.050663] pca954x 0-0077: registered 8 multiplexed busses for I2C mux pca9547 [ 4.094024] sbsa-gwdt 23a0000.watchdog: Initialized with 30s timeout @ 25000050 Hz, action=0. [enabled] [ 4.105594] qoriq-cpufreq qoriq-cpufreq: Freescale QorIQ CPU frequency scaling driver [ 4.114321] sdhci: Secure Digital Host Controller Interface driver [ 4.120511] sdhci: Copyright(c) Pierre Ossman [ 4.125070] Synopsys Designware Multimedia Card Interface Driver [ 4.131425] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.137510] sdhci-esdhc 2140000.esdhc: Adding to iommu group 8 [ 4.137552] sdhci-esdhc 2150000.esdhc: Adding to iommu group 9 [ 4.149290] ledtrig-cpu: registered to indicate activity on CPUs [ 4.155847] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 4.162606] usbcore: registered new interface driver usbhid [ 4.168170] usbhid: USB HID core driver [ 4.169189] mmc0: SDHCI controller on 2140000.esdhc [2140000.esdhc] using ADMA 64-bit [ 4.172596] No fsl,qman node [ 4.174777] mmc1: SDHCI controller on 2150000.esdhc [2150000.esdhc] using ADMA 64-bit [ 4.190539] Freescale USDPAA process driver [ 4.194712] fsl-usdpaa: no region found [ 4.198544] Freescale USDPAA process IRQ driver [ 4.204598] optee: probing for conduit method. [ 4.209040] optee: api uid mismatch [ 4.212525] optee: probe of firmware:optee failed with error -22 [ 4.221150] NET: Registered protocol family 26 [ 4.225623] u32 classifier [ 4.228343] input device check on [ 4.231997] Actions configured [ 4.235828] Initializing XFRM netlink socket [ 4.240146] NET: Registered protocol family 10 [ 4.244941] Segment Routing with IPv6 [ 4.248641] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.254752] NET: Registered protocol family 17 [ 4.259200] NET: Registered protocol family 15 [ 4.263656] Bridge firewalling registered [ 4.267766] 8021q: 802.1Q VLAN Support v1.8 [ 4.271952] lib80211: common routines for IEEE802.11 drivers [ 4.277644] 9pnet: Installing 9P2000 support [ 4.278589] mmc1: new HS400 MMC card at address 0001 [ 4.281924] tsn generic netlink module v1 init... [ 4.287174] mmcblk1: mmc1:0001 R1J59E 116 GiB [ 4.291591] Key type dns_resolver registered [ 4.296154] mmcblk1boot0: mmc1:0001 R1J59E partition 1 8.00 MiB [ 4.300479] registered taskstats version 1 [ 4.306331] mmcblk1boot1: mmc1:0001 R1J59E partition 2 8.00 MiB [ 4.310276] Loading compiled-in X.509 certificates [ 4.316251] mmcblk1rpmb: mmc1:0001 R1J59E partition 3 4.00 MiB, chardev (507:0) [ 4.321747] Btrfs loaded, crc32c=crc32c-generic [ 4.329163] mmcblk1: p1 p2 p3 p4 [ 4.334452] fsl_mc_dprc dprc.1: Adding to iommu group 10 [ 4.351059] mmc0: new ultra high speed SDR104 SDXC card at address aaaa [ 4.357976] mmcblk0: mmc0:aaaa SP64G 59.5 GiB [ 4.365120] mmcblk0: p1 [ 4.480151] fsl_mc_allocator dpbp.11: Adding to iommu group 10 [ 4.486058] fsl_mc_allocator dpbp.10: Adding to iommu group 10 [ 4.491954] fsl_mc_allocator dpbp.9: Adding to iommu group 10 [ 4.497760] fsl_mc_allocator dpbp.8: Adding to iommu group 10 [ 4.503566] fsl_mc_allocator dpbp.7: Adding to iommu group 10 [ 4.509369] fsl_mc_allocator dpbp.6: Adding to iommu group 10 [ 4.515173] fsl_mc_allocator dpbp.5: Adding to iommu group 10 [ 4.520975] fsl_mc_allocator dpbp.4: Adding to iommu group 10 [ 4.526780] fsl_mc_allocator dpbp.3: Adding to iommu group 10 [ 4.532581] fsl_mc_allocator dpbp.2: Adding to iommu group 10 [ 4.538387] fsl_mc_allocator dpbp.1: Adding to iommu group 10 [ 4.544189] fsl_mc_allocator dpbp.0: Adding to iommu group 10 [ 4.551000] fsl_mc_allocator dpmcp.28: Adding to iommu group 10 [ 4.557486] fsl_mc_allocator dpmcp.27: Adding to iommu group 10 [ 4.563968] fsl_mc_allocator dpmcp.26: Adding to iommu group 10 [ 4.570449] fsl_mc_allocator dpmcp.25: Adding to iommu group 10 [ 4.576930] fsl_mc_allocator dpmcp.24: Adding to iommu group 10 [ 4.583410] fsl_mc_allocator dpmcp.23: Adding to iommu group 10 [ 4.589895] fsl_mc_allocator dpmcp.22: Adding to iommu group 10 [ 4.596375] fsl_mc_allocator dpmcp.21: Adding to iommu group 10 [ 4.602855] fsl_mc_allocator dpmcp.20: Adding to iommu group 10 [ 4.609336] fsl_mc_allocator dpmcp.19: Adding to iommu group 10 [ 4.615818] fsl_mc_allocator dpmcp.18: Adding to iommu group 10 [ 4.622297] fsl_mc_allocator dpmcp.17: Adding to iommu group 10 [ 4.628780] fsl_mc_allocator dpmcp.16: Adding to iommu group 10 [ 4.635269] fsl_mc_allocator dpmcp.15: Adding to iommu group 10 [ 4.641758] fsl_mc_allocator dpmcp.14: Adding to iommu group 10 [ 4.648240] fsl_mc_allocator dpmcp.13: Adding to iommu group 10 [ 4.654723] fsl_mc_allocator dpmcp.12: Adding to iommu group 10 [ 4.661204] fsl_mc_allocator dpmcp.11: Adding to iommu group 10 [ 4.667687] fsl_mc_allocator dpmcp.10: Adding to iommu group 10 [ 4.674170] fsl_mc_allocator dpmcp.9: Adding to iommu group 10 [ 4.680565] fsl_mc_allocator dpmcp.8: Adding to iommu group 10 [ 4.686963] fsl_mc_allocator dpmcp.7: Adding to iommu group 10 [ 4.693359] fsl_mc_allocator dpmcp.6: Adding to iommu group 10 [ 4.699756] fsl_mc_allocator dpmcp.5: Adding to iommu group 10 [ 4.706152] fsl_mc_allocator dpmcp.4: Adding to iommu group 10 [ 4.712549] fsl_mc_allocator dpmcp.3: Adding to iommu group 10 [ 4.718945] fsl_mc_allocator dpmcp.2: Adding to iommu group 10 [ 4.725341] fsl_mc_allocator dpmcp.1: Adding to iommu group 10 [ 4.731241] fsl_mc_allocator dpcon.191: Adding to iommu group 10 [ 4.737310] fsl_mc_allocator dpcon.190: Adding to iommu group 10 [ 4.743380] fsl_mc_allocator dpcon.189: Adding to iommu group 10 [ 4.749453] fsl_mc_allocator dpcon.188: Adding to iommu group 10 [ 4.755522] fsl_mc_allocator dpcon.187: Adding to iommu group 10 [ 4.761590] fsl_mc_allocator dpcon.186: Adding to iommu group 10 [ 4.767663] fsl_mc_allocator dpcon.185: Adding to iommu group 10 [ 4.773732] fsl_mc_allocator dpcon.184: Adding to iommu group 10 [ 4.779802] fsl_mc_allocator dpcon.183: Adding to iommu group 10 [ 4.785871] fsl_mc_allocator dpcon.182: Adding to iommu group 10 [ 4.791943] fsl_mc_allocator dpcon.181: Adding to iommu group 10 [ 4.798013] fsl_mc_allocator dpcon.180: Adding to iommu group 10 [ 4.804087] fsl_mc_allocator dpcon.179: Adding to iommu group 10 [ 4.810165] fsl_mc_allocator dpcon.178: Adding to iommu group 10 [ 4.816237] fsl_mc_allocator dpcon.177: Adding to iommu group 10 [ 4.822310] fsl_mc_allocator dpcon.176: Adding to iommu group 10 [ 4.828381] fsl_mc_allocator dpcon.175: Adding to iommu group 10 [ 4.834452] fsl_mc_allocator dpcon.174: Adding to iommu group 10 [ 4.840524] fsl_mc_allocator dpcon.173: Adding to iommu group 10 [ 4.846596] fsl_mc_allocator dpcon.172: Adding to iommu group 10 [ 4.852676] fsl_mc_allocator dpcon.171: Adding to iommu group 10 [ 4.858750] fsl_mc_allocator dpcon.170: Adding to iommu group 10 [ 4.864822] fsl_mc_allocator dpcon.169: Adding to iommu group 10 [ 4.870895] fsl_mc_allocator dpcon.168: Adding to iommu group 10 [ 4.876968] fsl_mc_allocator dpcon.167: Adding to iommu group 10 [ 4.883042] fsl_mc_allocator dpcon.166: Adding to iommu group 10 [ 4.889114] fsl_mc_allocator dpcon.165: Adding to iommu group 10 [ 4.895188] fsl_mc_allocator dpcon.164: Adding to iommu group 10 [ 4.901262] fsl_mc_allocator dpcon.163: Adding to iommu group 10 [ 4.907336] fsl_mc_allocator dpcon.162: Adding to iommu group 10 [ 4.913408] fsl_mc_allocator dpcon.161: Adding to iommu group 10 [ 4.919481] fsl_mc_allocator dpcon.160: Adding to iommu group 10 [ 4.925556] fsl_mc_allocator dpcon.159: Adding to iommu group 10 [ 4.931631] fsl_mc_allocator dpcon.158: Adding to iommu group 10 [ 4.937707] fsl_mc_allocator dpcon.157: Adding to iommu group 10 [ 4.943781] fsl_mc_allocator dpcon.156: Adding to iommu group 10 [ 4.949856] fsl_mc_allocator dpcon.155: Adding to iommu group 10 [ 4.955930] fsl_mc_allocator dpcon.154: Adding to iommu group 10 [ 4.962006] fsl_mc_allocator dpcon.153: Adding to iommu group 10 [ 4.968080] fsl_mc_allocator dpcon.152: Adding to iommu group 10 [ 4.974164] fsl_mc_allocator dpcon.151: Adding to iommu group 10 [ 4.980238] fsl_mc_allocator dpcon.150: Adding to iommu group 10 [ 4.986314] fsl_mc_allocator dpcon.149: Adding to iommu group 10 [ 4.992389] fsl_mc_allocator dpcon.148: Adding to iommu group 10 [ 4.998465] fsl_mc_allocator dpcon.147: Adding to iommu group 10 [ 5.004541] fsl_mc_allocator dpcon.146: Adding to iommu group 10 [ 5.010618] fsl_mc_allocator dpcon.145: Adding to iommu group 10 [ 5.016695] fsl_mc_allocator dpcon.144: Adding to iommu group 10 [ 5.022772] fsl_mc_allocator dpcon.143: Adding to iommu group 10 [ 5.028849] fsl_mc_allocator dpcon.142: Adding to iommu group 10 [ 5.034927] fsl_mc_allocator dpcon.141: Adding to iommu group 10 [ 5.041005] fsl_mc_allocator dpcon.140: Adding to iommu group 10 [ 5.047085] fsl_mc_allocator dpcon.139: Adding to iommu group 10 [ 5.053162] fsl_mc_allocator dpcon.138: Adding to iommu group 10 [ 5.059240] fsl_mc_allocator dpcon.137: Adding to iommu group 10 [ 5.065318] fsl_mc_allocator dpcon.136: Adding to iommu group 10 [ 5.071396] fsl_mc_allocator dpcon.135: Adding to iommu group 10 [ 5.077480] fsl_mc_allocator dpcon.134: Adding to iommu group 10 [ 5.083558] fsl_mc_allocator dpcon.133: Adding to iommu group 10 [ 5.089636] fsl_mc_allocator dpcon.132: Adding to iommu group 10 [ 5.095720] fsl_mc_allocator dpcon.131: Adding to iommu group 10 [ 5.101800] fsl_mc_allocator dpcon.130: Adding to iommu group 10 [ 5.107879] fsl_mc_allocator dpcon.129: Adding to iommu group 10 [ 5.113958] fsl_mc_allocator dpcon.128: Adding to iommu group 10 [ 5.120041] fsl_mc_allocator dpcon.127: Adding to iommu group 10 [ 5.126119] fsl_mc_allocator dpcon.126: Adding to iommu group 10 [ 5.132201] fsl_mc_allocator dpcon.125: Adding to iommu group 10 [ 5.138280] fsl_mc_allocator dpcon.124: Adding to iommu group 10 [ 5.144366] fsl_mc_allocator dpcon.123: Adding to iommu group 10 [ 5.150446] fsl_mc_allocator dpcon.122: Adding to iommu group 10 [ 5.156527] fsl_mc_allocator dpcon.121: Adding to iommu group 10 [ 5.162606] fsl_mc_allocator dpcon.120: Adding to iommu group 10 [ 5.168688] fsl_mc_allocator dpcon.119: Adding to iommu group 10 [ 5.174768] fsl_mc_allocator dpcon.118: Adding to iommu group 10 [ 5.180850] fsl_mc_allocator dpcon.117: Adding to iommu group 10 [ 5.186931] fsl_mc_allocator dpcon.116: Adding to iommu group 10 [ 5.193013] fsl_mc_allocator dpcon.115: Adding to iommu group 10 [ 5.199097] fsl_mc_allocator dpcon.114: Adding to iommu group 10 [ 5.205179] fsl_mc_allocator dpcon.113: Adding to iommu group 10 [ 5.211261] fsl_mc_allocator dpcon.112: Adding to iommu group 10 [ 5.217343] fsl_mc_allocator dpcon.111: Adding to iommu group 10 [ 5.223427] fsl_mc_allocator dpcon.110: Adding to iommu group 10 [ 5.229515] fsl_mc_allocator dpcon.109: Adding to iommu group 10 [ 5.235598] fsl_mc_allocator dpcon.108: Adding to iommu group 10 [ 5.241682] fsl_mc_allocator dpcon.107: Adding to iommu group 10 [ 5.247764] fsl_mc_allocator dpcon.106: Adding to iommu group 10 [ 5.253847] fsl_mc_allocator dpcon.105: Adding to iommu group 10 [ 5.259931] fsl_mc_allocator dpcon.104: Adding to iommu group 10 [ 5.266026] fsl_mc_allocator dpcon.103: Adding to iommu group 10 [ 5.272114] fsl_mc_allocator dpcon.102: Adding to iommu group 10 [ 5.278198] fsl_mc_allocator dpcon.101: Adding to iommu group 10 [ 5.284284] fsl_mc_allocator dpcon.100: Adding to iommu group 10 [ 5.290369] fsl_mc_allocator dpcon.99: Adding to iommu group 10 [ 5.296368] fsl_mc_allocator dpcon.98: Adding to iommu group 10 [ 5.302366] fsl_mc_allocator dpcon.97: Adding to iommu group 10 [ 5.308365] fsl_mc_allocator dpcon.96: Adding to iommu group 10 [ 5.314370] fsl_mc_allocator dpcon.95: Adding to iommu group 10 [ 5.320368] fsl_mc_allocator dpcon.94: Adding to iommu group 10 [ 5.326369] fsl_mc_allocator dpcon.93: Adding to iommu group 10 [ 5.332369] fsl_mc_allocator dpcon.92: Adding to iommu group 10 [ 5.338370] fsl_mc_allocator dpcon.91: Adding to iommu group 10 [ 5.344369] fsl_mc_allocator dpcon.90: Adding to iommu group 10 [ 5.350369] fsl_mc_allocator dpcon.89: Adding to iommu group 10 [ 5.356368] fsl_mc_allocator dpcon.88: Adding to iommu group 10 [ 5.362379] fsl_mc_allocator dpcon.87: Adding to iommu group 10 [ 5.368383] fsl_mc_allocator dpcon.86: Adding to iommu group 10 [ 5.374384] fsl_mc_allocator dpcon.85: Adding to iommu group 10 [ 5.380384] fsl_mc_allocator dpcon.84: Adding to iommu group 10 [ 5.386384] fsl_mc_allocator dpcon.83: Adding to iommu group 10 [ 5.392385] fsl_mc_allocator dpcon.82: Adding to iommu group 10 [ 5.398387] fsl_mc_allocator dpcon.81: Adding to iommu group 10 [ 5.404388] fsl_mc_allocator dpcon.80: Adding to iommu group 10 [ 5.410390] fsl_mc_allocator dpcon.79: Adding to iommu group 10 [ 5.416391] fsl_mc_allocator dpcon.78: Adding to iommu group 10 [ 5.422395] fsl_mc_allocator dpcon.77: Adding to iommu group 10 [ 5.428398] fsl_mc_allocator dpcon.76: Adding to iommu group 10 [ 5.434400] fsl_mc_allocator dpcon.75: Adding to iommu group 10 [ 5.440403] fsl_mc_allocator dpcon.74: Adding to iommu group 10 [ 5.446406] fsl_mc_allocator dpcon.73: Adding to iommu group 10 [ 5.452409] fsl_mc_allocator dpcon.72: Adding to iommu group 10 [ 5.458413] fsl_mc_allocator dpcon.71: Adding to iommu group 10 [ 5.464416] fsl_mc_allocator dpcon.70: Adding to iommu group 10 [ 5.470419] fsl_mc_allocator dpcon.69: Adding to iommu group 10 [ 5.476428] fsl_mc_allocator dpcon.68: Adding to iommu group 10 [ 5.482431] fsl_mc_allocator dpcon.67: Adding to iommu group 10 [ 5.488436] fsl_mc_allocator dpcon.66: Adding to iommu group 10 [ 5.494439] fsl_mc_allocator dpcon.65: Adding to iommu group 10 [ 5.500442] fsl_mc_allocator dpcon.64: Adding to iommu group 10 [ 5.506448] fsl_mc_allocator dpcon.63: Adding to iommu group 10 [ 5.512452] fsl_mc_allocator dpcon.62: Adding to iommu group 10 [ 5.518459] fsl_mc_allocator dpcon.61: Adding to iommu group 10 [ 5.524463] fsl_mc_allocator dpcon.60: Adding to iommu group 10 [ 5.530468] fsl_mc_allocator dpcon.59: Adding to iommu group 10 [ 5.536473] fsl_mc_allocator dpcon.58: Adding to iommu group 10 [ 5.542479] fsl_mc_allocator dpcon.57: Adding to iommu group 10 [ 5.548483] fsl_mc_allocator dpcon.56: Adding to iommu group 10 [ 5.554490] fsl_mc_allocator dpcon.55: Adding to iommu group 10 [ 5.560495] fsl_mc_allocator dpcon.54: Adding to iommu group 10 [ 5.566502] fsl_mc_allocator dpcon.53: Adding to iommu group 10 [ 5.572507] fsl_mc_allocator dpcon.52: Adding to iommu group 10 [ 5.578513] fsl_mc_allocator dpcon.51: Adding to iommu group 10 [ 5.584522] fsl_mc_allocator dpcon.50: Adding to iommu group 10 [ 5.590528] fsl_mc_allocator dpcon.49: Adding to iommu group 10 [ 5.596535] fsl_mc_allocator dpcon.48: Adding to iommu group 10 [ 5.602543] fsl_mc_allocator dpcon.47: Adding to iommu group 10 [ 5.608550] fsl_mc_allocator dpcon.46: Adding to iommu group 10 [ 5.614559] fsl_mc_allocator dpcon.45: Adding to iommu group 10 [ 5.620566] fsl_mc_allocator dpcon.44: Adding to iommu group 10 [ 5.626574] fsl_mc_allocator dpcon.43: Adding to iommu group 10 [ 5.632581] fsl_mc_allocator dpcon.42: Adding to iommu group 10 [ 5.638590] fsl_mc_allocator dpcon.41: Adding to iommu group 10 [ 5.644604] fsl_mc_allocator dpcon.40: Adding to iommu group 10 [ 5.650613] fsl_mc_allocator dpcon.39: Adding to iommu group 10 [ 5.656622] fsl_mc_allocator dpcon.38: Adding to iommu group 10 [ 5.662631] fsl_mc_allocator dpcon.37: Adding to iommu group 10 [ 5.668641] fsl_mc_allocator dpcon.36: Adding to iommu group 10 [ 5.674650] fsl_mc_allocator dpcon.35: Adding to iommu group 10 [ 5.680661] fsl_mc_allocator dpcon.34: Adding to iommu group 10 [ 5.686669] fsl_mc_allocator dpcon.33: Adding to iommu group 10 [ 5.692680] fsl_mc_allocator dpcon.32: Adding to iommu group 10 [ 5.698693] fsl_mc_allocator dpcon.31: Adding to iommu group 10 [ 5.704703] fsl_mc_allocator dpcon.30: Adding to iommu group 10 [ 5.710716] fsl_mc_allocator dpcon.29: Adding to iommu group 10 [ 5.716727] fsl_mc_allocator dpcon.28: Adding to iommu group 10 [ 5.722740] fsl_mc_allocator dpcon.27: Adding to iommu group 10 [ 5.728750] fsl_mc_allocator dpcon.26: Adding to iommu group 10 [ 5.734762] fsl_mc_allocator dpcon.25: Adding to iommu group 10 [ 5.740774] fsl_mc_allocator dpcon.24: Adding to iommu group 10 [ 5.746790] fsl_mc_allocator dpcon.23: Adding to iommu group 10 [ 5.752802] fsl_mc_allocator dpcon.22: Adding to iommu group 10 [ 5.758816] fsl_mc_allocator dpcon.21: Adding to iommu group 10 [ 5.764828] fsl_mc_allocator dpcon.20: Adding to iommu group 10 [ 5.770844] fsl_mc_allocator dpcon.19: Adding to iommu group 10 [ 5.776857] fsl_mc_allocator dpcon.18: Adding to iommu group 10 [ 5.782872] fsl_mc_allocator dpcon.17: Adding to iommu group 10 [ 5.788886] fsl_mc_allocator dpcon.16: Adding to iommu group 10 [ 5.794900] fsl_mc_allocator dpcon.15: Adding to iommu group 10 [ 5.800914] fsl_mc_allocator dpcon.14: Adding to iommu group 10 [ 5.806936] fsl_mc_allocator dpcon.13: Adding to iommu group 10 [ 5.812951] fsl_mc_allocator dpcon.12: Adding to iommu group 10 [ 5.818967] fsl_mc_allocator dpcon.11: Adding to iommu group 10 [ 5.824984] fsl_mc_allocator dpcon.10: Adding to iommu group 10 [ 5.830999] fsl_mc_allocator dpcon.9: Adding to iommu group 10 [ 5.836928] fsl_mc_allocator dpcon.8: Adding to iommu group 10 [ 5.842860] fsl_mc_allocator dpcon.7: Adding to iommu group 10 [ 5.848792] fsl_mc_allocator dpcon.6: Adding to iommu group 10 [ 5.854721] fsl_mc_allocator dpcon.5: Adding to iommu group 10 [ 5.860649] fsl_mc_allocator dpcon.4: Adding to iommu group 10 [ 5.866578] fsl_mc_allocator dpcon.3: Adding to iommu group 10 [ 5.872519] fsl_mc_allocator dpcon.2: Adding to iommu group 10 [ 5.878450] fsl_mc_allocator dpcon.1: Adding to iommu group 10 [ 5.884380] fsl_mc_allocator dpcon.0: Adding to iommu group 10 [ 5.890313] fsl_dpaa2_eth dpni.11: Adding to iommu group 10 [ 5.983249] fsl_dpaa2_eth dpni.10: Adding to iommu group 10 [ 6.076166] fsl_dpaa2_eth dpni.9: Adding to iommu group 10 [ 6.161966] fsl_dpaa2_eth dpni.8: Adding to iommu group 10 [ 6.247253] fsl_dpaa2_eth dpni.7: Adding to iommu group 10 [ 6.332544] fsl_dpaa2_eth dpni.6: Adding to iommu group 10 [ 6.417846] fsl_dpaa2_eth dpni.5: Adding to iommu group 10 [ 6.503131] fsl_dpaa2_eth dpni.4: Adding to iommu group 10 [ 6.587925] fsl_dpaa2_eth dpni.3: Adding to iommu group 10 [ 6.680218] fsl_dpaa2_eth dpni.2: Adding to iommu group 10 [ 6.780010] fsl_dpaa2_eth dpni.1: Adding to iommu group 10 [ 6.872310] fsl_dpaa2_eth dpni.0: Adding to iommu group 10 [ 6.964606] fsl_dpaa2_mac dpmac.18: Adding to iommu group 10 [ 6.971445] fsl_dpaa2_mac dpmac.17: Adding to iommu group 10 [ 6.978290] fsl_dpaa2_mac dpmac.6: Adding to iommu group 10 [ 6.985048] fsl_dpaa2_mac dpmac.5: Adding to iommu group 10 [ 6.991802] fsl_dpaa2_mac dpmac.4: Adding to iommu group 10 [ 6.998563] fsl_dpaa2_mac dpmac.3: Adding to iommu group 10 [ 7.006830] fsl_mc_dpio dpio.15: Adding to iommu group 10 [ 7.015581] fsl_mc_dpio dpio.15: probed [ 7.021628] fsl_mc_dpio dpio.14: Adding to iommu group 10 [ 7.030638] fsl_mc_dpio dpio.14: probed [ 7.036600] fsl_mc_dpio dpio.13: Adding to iommu group 10 [ 7.045602] fsl_mc_dpio dpio.13: probed [ 7.051556] fsl_mc_dpio dpio.12: Adding to iommu group 10 [ 7.060555] fsl_mc_dpio dpio.12: probed [ 7.066520] fsl_mc_dpio dpio.11: Adding to iommu group 10 [ 7.075561] fsl_mc_dpio dpio.11: probed [ 7.081656] fsl_mc_dpio dpio.10: Adding to iommu group 10 [ 7.090674] fsl_mc_dpio dpio.10: probed [ 7.096630] fsl_mc_dpio dpio.9: Adding to iommu group 10 [ 7.105545] fsl_mc_dpio dpio.9: probed [ 7.111411] fsl_mc_dpio dpio.8: Adding to iommu group 10 [ 7.120320] fsl_mc_dpio dpio.8: probed [ 7.126198] fsl_mc_dpio dpio.7: Adding to iommu group 10 [ 7.135150] fsl_mc_dpio dpio.7: probed [ 7.141147] fsl_mc_dpio dpio.6: Adding to iommu group 10 [ 7.150078] fsl_mc_dpio dpio.6: probed [ 7.155952] fsl_mc_dpio dpio.5: Adding to iommu group 10 [ 7.164862] fsl_mc_dpio dpio.5: probed [ 7.170746] fsl_mc_dpio dpio.4: Adding to iommu group 10 [ 7.179706] fsl_mc_dpio dpio.4: probed [ 7.185716] fsl_mc_dpio dpio.3: Adding to iommu group 10 [ 7.194645] fsl_mc_dpio dpio.3: probed [ 7.200519] fsl_mc_dpio dpio.2: Adding to iommu group 10 [ 7.209429] fsl_mc_dpio dpio.2: probed [ 7.215302] fsl_mc_dpio dpio.1: Adding to iommu group 10 [ 7.224215] fsl_mc_dpio dpio.1: probed [ 7.230097] fsl_mc_dpio dpio.0: Adding to iommu group 10 [ 7.239050] fsl_mc_dpio dpio.0: probed [ 7.246528] fsl_mc_dprc dprc.1: DPRC device bound to driver [ 7.252524] pcieport 0000:00:00.0: PME: Signaling with IRQ 38 [ 7.258512] pcieport 0001:00:00.0: PME: Signaling with IRQ 39 [ 7.510687] fsl_dpaa2_eth dpni.11 (unnamed net_device) (uninitialized): PHY [0x0000000008b96000:02] driver [Qualcomm Atheros AR8035] (irq=POLL) [ 7.524648] fsl_dpaa2_eth dpni.11: Probed interface eth1 [ 7.774684] fsl_dpaa2_eth dpni.10 (unnamed net_device) (uninitialized): PHY [0x0000000008b96000:01] driver [Qualcomm Atheros AR8035] (irq=POLL) [ 7.788582] fsl_dpaa2_eth dpni.10: Probed interface eth2 [ 7.970272] fsl_dpaa2_eth dpni.9: Probed interface eth3 [ 8.149935] fsl_dpaa2_eth dpni.8: Probed interface eth4 [ 8.330615] fsl_dpaa2_eth dpni.7: Probed interface eth5 [ 8.510286] fsl_dpaa2_eth dpni.6: Probed interface eth6 [ 8.690963] fsl_dpaa2_eth dpni.5: Probed interface eth7 [ 8.878642] fsl_dpaa2_eth dpni.4: Probed interface eth8 [ 9.067035] fsl_dpaa2_eth dpni.3: Probed interface eth9 [ 9.255433] fsl_dpaa2_eth dpni.2: Probed interface eth10 [ 9.444694] fsl_dpaa2_eth dpni.1 (unnamed net_device) (uninitialized): PHY [0x0000000008b96000:05] driver [Aquantia AQR107] (irq=123) [ 9.457738] fsl_dpaa2_eth dpni.1: Probed interface eth11 [ 9.646994] fsl_dpaa2_eth dpni.0 (unnamed net_device) (uninitialized): PHY [0x0000000008b96000:04] driver [Aquantia AQR107] (irq=122) [ 9.660003] fsl_dpaa2_eth dpni.0: Probed interface eth12 [ 9.679925] ALSA device list: [ 9.682918] No soundcards found. [ 9.688788] Freeing unused kernel memory: 6656K [ 9.693513] Run /init as init process INIT: version 2.99 booting Starting udev [ 9.821505] udevd[295]: starting version 3.2.10 [ 9.826162] random: udevd: uninitialized urandom read (16 bytes read) [ 9.832631] random: udevd: uninitialized urandom read (16 bytes read) [ 9.839116] random: udevd: uninitialized urandom read (16 bytes read) [ 9.848392] udevd[296]: starting eudev-3.2.10 [ 9.929913] random: fast init done [ 11.232643] random: crng init done [ 11.236093] random: 5 urandom warning(s) missed due to ratelimiting NXP LSDK tiny 2108 (based on Yocto) TinyLinux login: root root@TinyLinux:~# ls-listni dprc.1/dpni.11 (interface: eth1, end point: dpmac.18) dprc.1/dpni.10 (interface: eth2, end point: dpmac.17) dprc.1/dpni.9 (interface: eth3) dprc.1/dpni.8 (interface: eth4) dprc.1/dpni.7 (interface: eth5) dprc.1/dpni.6 (interface: eth6) dprc.1/dpni.5 (interface: eth7) dprc.1/dpni.4 (interface: eth8) dprc.1/dpni.3 (interface: eth9, end point: dpmac.6) dprc.1/dpni.2 (interface: eth10, end point: dpmac.5) dprc.1/dpni.1 (interface: eth11, end point: dpmac.4) dprc.1/dpni.0 (interface: eth12, end point: dpmac.3) root@TinyLinux:~# ifconfig eth2 100.1.1.100 [ 181.403810] fsl_dpaa2_eth dpni.10 eth2: configuring for phy/rgmii-id link mode root@TinyLinux:~# ping 100.1.1.1 PING 100.1.1.1 (100.1.1.1): 56 data bytes ^C --- 100.1.1.1 ping statistics --- 8 packets transmitted, 0 packets received, 100% packet loss root@TinyLinux:~# root@TinyLinux:~# b25805@star:/home/addon_4T/tftpboot/nxa22585/lx2160ardb$ b25805@star:/home/addon_4T/tftpboot/nxa22585/lx2160ardb$ bft map -m 'LX2160ARDB-3_RGMII1,lan1' -c Mapped: LX2160ARDB-3_RGMII1 -> lan1 (resource) name: LX2160ARDB-3 | ip: 192.168.2.180 | mac: 00:e0:0c:00:9f:xx LX2160ARDB-3_25G_AUI1 LX2160ARDB-4_25G_AUI1 LX2160ARDB-3_25G_AUI2 LX2160ARDB-4_25G_AUI2 LX2160ARDB-3_40G_XLAUI1 LX2160ARDB-4_40G_XLAUI1 LX2160ARDB-3_RGMII1 LAN_1:3 LX2160ARDB-3_RGMII2 MRV6_1:23 LX2160ARDB-3_SD Sandisk_16GB LX2160ARDB-3_Slot1_PCIe_NIC NW_3:19 LX2160ARDB-3_USB1 Sandisk_16GB(USB3.0) LX2160ARDB-3_USXGMII1 LX2160ARDB-4_USXGMII1 LX2160ARDB-3_USXGMII2 LX2160ARDB-4_USXGMII2 LX2160ARDB-3_serial0 OG_3:10 b25805@star:/home/addon_4T/tftpboot/nxa22585/lx2160ardb$ bft connect LX2160ARDB-3 Trying 10.192.208.248... Reverse DNS Lookup... Failed. Connecting to host 10.192.208.248:6010 Escape character: Ctrl-\ (ASCII 28, FS): enabled Type the escape character followed by C to get back, or followed by ? to see other options. Session Log: /home/b25805/LX2160ARDB-3-kermitlog-Kx3lzM, text (0) ---------------------------------------------------- root@TinyLinux:~# ifconfig eth2: flags=4163 mtu 1500 inet 100.1.1.100 netmask 255.0.0.0 broadcast 100.255.255.255 inet6 fe80::2e0:cff:fe00:9f05 prefixlen 64 scopeid 0x20 ether 00:e0:0c:00:9f:05 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 9 bytes 766 (766.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 8 bytes 896 (896.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 8 bytes 896 (896.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 root@TinyLinux:~# ping 100.1.1.1 PING 100.1.1.1 (100.1.1.1): 56 data bytes 64 bytes from 100.1.1.1: seq=0 ttl=64 time=0.509 ms 64 bytes from 100.1.1.1: seq=1 ttl=64 time=0.257 ms 64 bytes from 100.1.1.1: seq=2 ttl=64 time=0.234 ms 64 bytes from 100.1.1.1: seq=3 ttl=64 time=0.216 ms 64 bytes from 100.1.1.1: seq=4 ttl=64 time=0.261 ms 64 bytes from 100.1.1.1: seq=5 ttl=64 time=0.243 ms 64 bytes from 100.1.1.1: seq=6 ttl=64 time=0.247 ms 64 bytes from 100.1.1.1: seq=7 ttl=64 time=0.221 ms 64 bytes from 100.1.1.1: seq=8 ttl=64 time=0.187 ms ^C --- 100.1.1.1 ping statistics --- 9 packets transmitted, 9 packets received, 0% packet loss round-trip min/avg/max = 0.187/0.263/0.509 ms root@TinyLinux:~#