Trying 10.192.208.22... Connected to 10.192.208.22. Escape character is '^]'. root@localhost:~# sync root@localhost:~# uname -a Linux LS1046ARDB 5.4.47-00091-g9ee73a94f0d0 #1 SMP PREEMPT Sat Nov 7 00:21:15 CST 2020 aarch64 aarch64 aarch64 GNU/Linux root@localhost:~# reboot [ OK ] Stopped Message of the Day. [ OK ] Stopped Discard unused blocks once a week. [ OK ] Stopped target Graphical Interface. [ OK ] Stopped QEMU KVM preparation - module, ksm, hugepages. Stopping watchdog daemon... [ OK ] Stopped Daily apt upgrade and clean activities. [ OK ] Stopped Daily apt download activities. Stopping Availability of block devices... [ OK ] Stopped Daily Cleanup of Temporary Directories. [ OK ] Stopped Serial Getty on ttyS0. [ OK ] Stopped User Manager for UID 0. [ OK ] Stopped Availability of block devices. [ OK ] Stopped watchdog daemon. [ OK ] Stopped Session 3 of user root. [ OK ] Stopped target Multi-User System. Stopping LXC Container Initialization and Autoboot Code... Stopping LSB: Set sysfs variables from /etc/sysfs.conf... Stopping netdata - Real-time performance monitoring... Stopping Dispatcher daemon for systemd-networkd... Stopping Suspend/Resume Running libvirt Guests... Stopping rng-tools.service... Stopping Internet superserver... Stopping Docker Application Container Engine... Stopping OpenBSD Secure Shell server... Stopping vsftpd FTP server... Stopping Regular background program processing daemon... [ OK ] Stopped Resets System Activity Data Collector. Stopping LXD - container startup/shutdown... [ OK ] Stopped Initialize hardware monitoring sensors. Stopping LTTng session daemon... Stopping Unattended Upgrades Shutdown... Stopping strongSwan IPsec IKEv1/IKEv2 daemon using ipsec.conf... Stopping LSB: Load kernel image with kexec... Stopping System Logging Service... Stopping LSB: Mount debugfs on /sys/kernel/debug... Stopping Advanced key-value store... Stopping LSB: HPA's tftp server... Stopping LSB: network benchmark... [ OK ] Removed slice User Slice of root. [ OK ] Stopped target Login Prompts. Stopping Getty on tty1... [ OK ] Removed slice system-serial\x2dgetty.slice. [ OK ] Stopped System Logging Service. [ OK ] Stopped LTTng session daemon. [ OK ] Stopped Dispatcher daemon for systemd-networkd. [ OK ] Stopped Regular background program processing daemon. [ OK ] Stopped Unattended Upgrades Shutdown. [ OK ] Stopped strongSwan IPsec IKEv1/IKEv2 daemon using ipsec.conf. [ OK ] Stopped Internet superserver. [ OK ] Stopped vsftpd FTP server. [ OK ] Stopped Docker Application Container Engine. [ OK ] Stopped Getty on tty1. [ OK ] Stopped OpenBSD Secure Shell server. [ OK ] Stopped LXC Container Initialization and Autoboot Code. [ OK ] Stopped LSB: Set sysfs variables from /etc/sysfs.conf. [ OK ] Stopped Advanced key-value store. [ OK ] Stopped LXD - container startup/shutdown. Stopping LXC network bridge setup... Stopping FUSE filesystem for LXC... [ OK ] Removed slice system-getty.slice. Stopping Permit User Sessions... Stopping containerd container runtime... Stopping Login Service... [ OK ] Unmounted /var/lib/lxcfs. [ OK ] Stopped Login Service. [ OK ] Stopped containerd container runtime. [ OK ] Stopped LSB: Mount debugfs on /sys/kernel/debug. [ OK ] Stopped LSB: HPA's tftp server. [ OK ] Stopped LSB: network benchmark. [ OK ] Stopped LXC network bridge setup. [ OK ] Stopped Permit User Sessions. [ OK ] Stopped FUSE filesystem for LXC. [ OK ] Stopped target Host and Network Name Lookups. [ OK ] Stopped LSB: Load kernel image with kexec. Stopping LSB: Execute the kexec -e command to reboot system... [ OK ] Stopped LSB: Execute the kexec -e command to reboot system. [ OK ] Stopped netdata - Real-time performance monitoring. [ OK ] Stopped target Network is Online. [ 244.495378] libvirt-guests.sh[2270]: Running guests on default URI: no running guests. [ OK ] Stopped Suspend/Resume Running libvirt Guests. [ OK ] Stopped target Libvirt guests shutdown. Stopping Virtualization daemon... [ OK ] Stopped target System Time Synchronized. [ OK ] Stopped Virtualization daemon. Stopping D-Bus System Message Bus... [ OK ] Stopped target Network. Stopping Raise network interfaces... Stopping Network Name Resolution... [ OK ] Stopped Network Name Resolution. [ OK ] Stopped D-Bus System Message Bus. [ OK ] Stopped Raise network interfaces. [ OK ] Stopped target Network (Pre). [ **] A stop job is running for rng-tools.service (6s / 5min) [ ***] A stop job is running for rng-tools.service (7s / 5min) [ *** ] A stop job is running for rng-tools.service (7s / 5min) [ *** ] A stop job is running for rng-tools.service (8s / 5min) [*** ] A stop job is running for rng-tools.service (8s / 5min) [** ] A stop job is running for rng-tools.service (9s / 5min) [* ] A stop job is running for rng-tools.service (9s / 5min) [** ] A stop job is running for rng-tools.service (10s / 5min) [ OK ] Stopped rng-tools.service. [ OK ] Stopped target Basic System. [ OK ] Stopped target Slices. [ OK ] Removed slice User and Session Slice. [ OK ] Stopped target Paths. [ OK ] Stopped target Sockets. [ OK ] Closed Virtual machine lock manager socket. [ OK ] Closed D-Bus System Message Bus Socket. [ OK ] Closed Virtual machine log manager socket. [ OK ] Closed Docker Socket for the API. [ OK ] Closed Syslog Socket. [ OK ] Closed LXD - unix socket. [ OK ] Stopped target System Initialization. Stopping Network Time Synchronization... Stopping Update UTMP about System Boot/Shutdown... [ OK ] Stopped Apply Kernel Variables. [ OK ] Stopped Load Kernel Modules. Unmounting Boot Partition... Stopping Load/Save Random Seed... [ OK ] Stopped target Local Encrypted Volumes. [ OK ] Stopped Dispatch Password Requests to Console Directory Watch. [ OK ] Stopped Forward Password Requests to Wall Directory Watch. [ OK ] Stopped target Remote File Systems. [ OK ] Stopped Network Time Synchronization. [ OK ] Unmounted Boot Partition. [ OK ] Stopped Load/Save Random Seed. [ OK ] Stopped Update UTMP about System Boot/Shutdown. [ OK ] Stopped Create Volatile Files and Directories. [ OK ] Stopped target Local File Systems. Unmounting /media/ram... Unmounting /run/user/0... [ OK ] Unmounted /media/ram. [ OK ] Unmounted /run/user/0. [ OK ] Reached target Unmount All Filesystems. [ OK ] Stopped target Swap. [ OK ] Stopped target Local File Systems (Pre). Stopping Monitoring of LVM2 mirrors…ng dmeventd or progress polling... [ OK ] Stopped Remount Root and Kernel File Systems. [ OK ] Stopped Create Static Device Nodes in /dev. [ OK ] Reached target Shutdown. [ OK ] Reached target Final Step. Starting Reboot... [ OK ] Stopped Monitoring of LVM2 mirrors,…sing dmeventd or progress polling. Stopping LVM2 metadata daemon... [ OK ] Stopped LVM2 metadata daemon. [ 254.212255] watchdog: watchdog0: watchdog did not stop! [ 254.881789] imx2-wdt 2ad0000.watchdog: Device shutdown: Expect reboot! [ 254.893933] reboot: Restarting system NOTICE: UDIMM 18ASF2G72AZ-2G6E2 NOTICE: 16 GB DDR4, 64-bit, CL=15, ECC on, CS0+CS1 NOTICE: BL2: v1.5(release):LSDK-19.09 NOTICE: BL2: Built : 21:13:43, Oct 17 2019 NOTICE: BL2: Booting BL31 NOTICE: BL31: v1.5(release):LSDK-19.09 NOTICE: BL31: Built : 21:14:07, Oct 17 2019 NOTICE: Welcome to LS1046 BL31 Phase U-Boot 2019.04-gce862bb2d2 (Oct 17 2019 - 17:01:15 +0800) SoC: LS1046AE Rev1.0 (0x87070010) Clock Configuration: CPU0(A72):1800 MHz CPU1(A72):1800 MHz CPU2(A72):1800 MHz CPU3(A72):1800 MHz Bus: 700 MHz DDR: 2100 MT/s FMAN: 800 MHz Reset Configuration Word (RCW): 00000000: 0e150012 10000000 00000000 00000000 00000010: 11335559 40005012 40025000 c1000000 00000020: 00000000 00000000 00000000 00238800 00000030: 20124000 00003101 00000096 00000001 Model: LS1046A RDB Board Board: LS1046ARDB, boot from QSPI vBank 0 CPLD: V2.2 PCBA: V2.0 SERDES Reference Clocks: SD1_CLK1 = 156.25MHZ, SD1_CLK2 = 100.00MHZ I2C: ready DRAM: 15.9 GiB (DDR4, 64-bit, CL=15, ECC on) DDR Chip-Select Interleaving Mode: CS0+CS1 SEC0: RNG instantiated Using SERDES1 Protocol: 4403 (0x1133) Using SERDES2 Protocol: 21849 (0x5559) NAND: 512 MiB MMC: FSL_SDHC: 0 Loading Environment from SPI Flash... SF: Detected s25fl512s with page size 256 Bytes, erase size 256 KiB, total 64 MiB OK EEPROM: NXID v1 In: serial Out: serial Err: serial Net: SF: Detected s25fl512s with page size 256 Bytes, erase size 256 KiB, total 64 MiB Fman1: Uploading microcode version 106.4.18 FM1@TGEC1 running firmware version 3.1.5 FM1@TGEC1: system interface XFI FM1@TGEC1: Aquantia AQR107 Firmware Version 3.1.5 PCIe0: pcie@3400000 Root Complex: no link PCIe1: pcie@3500000 Root Complex: no link PCIe2: pcie@3600000 Root Complex: x1 gen1 e1000: 68:05:ca:3f:08:a3 FM1@DTSEC3, FM1@DTSEC4, FM1@DTSEC5, FM1@DTSEC6, FM1@TGEC1, FM1@TGEC2, e1000#0 [PRIME] Warning: e1000#0 MAC addresses don't match: Address in SROM is 68:05:ca:3f:08:a3 Address in environment is 00:e0:0c:00:10:06 Hit any key to stop autoboot: 5  0 => => => reset resetting ... NOTICE: UDIMM 18ASF2G72AZ-2G6E2 NOTICE: 16 GB DDR4, 64-bit, CL=15, ECC on, CS0+CS1 NOTICE: BL2: v1.5(release):LSDK-19.09 NOTICE: BL2: Built : 21:13:43, Oct 17 2019 NOTICE: BL2: Booting BL31 NOTICE: BL31: v1.5(release):LSDK-19.09 NOTICE: BL31: Built : 21:14:07, Oct 17 2019 NOTICE: Welcome to LS1046 BL31 Phase U-Boot 2019.04-gce862bb2d2 (Oct 17 2019 - 17:01:15 +0800) SoC: LS1046AE Rev1.0 (0x87070010) Clock Configuration: CPU0(A72):1800 MHz CPU1(A72):1800 MHz CPU2(A72):1800 MHz CPU3(A72):1800 MHz Bus: 700 MHz DDR: 2100 MT/s FMAN: 800 MHz Reset Configuration Word (RCW): 00000000: 0e150012 10000000 00000000 00000000 00000010: 11335559 40005012 40025000 c1000000 00000020: 00000000 00000000 00000000 00238800 00000030: 20124000 00003101 00000096 00000001 Model: LS1046A RDB Board Board: LS1046ARDB, boot from QSPI vBank 0 CPLD: V2.2 PCBA: V2.0 SERDES Reference Clocks: SD1_CLK1 = 156.25MHZ, SD1_CLK2 = 100.00MHZ I2C: ready DRAM: 15.9 GiB (DDR4, 64-bit, CL=15, ECC on) DDR Chip-Select Interleaving Mode: CS0+CS1 SEC0: RNG instantiated Using SERDES1 Protocol: 4403 (0x1133) Using SERDES2 Protocol: 21849 (0x5559) NAND: 512 MiB MMC: FSL_SDHC: 0 Loading Environment from SPI Flash... SF: Detected s25fl512s with page size 256 Bytes, erase size 256 KiB, total 64 MiB OK EEPROM: NXID v1 In: serial Out: serial Err: serial Net: SF: Detected s25fl512s with page size 256 Bytes, erase size 256 KiB, total 64 MiB Fman1: Uploading microcode version 106.4.18 FM1@TGEC1 running firmware version 3.1.5 FM1@TGEC1: system interface XFI FM1@TGEC1: Aquantia AQR107 Firmware Version 3.1.5 PCIe0: pcie@3400000 Root Complex: no link PCIe1: pcie@3500000 Root Complex: no link PCIe2: pcie@3600000 Root Complex: x1 gen1 e1000: 68:05:ca:3f:08:a3 FM1@DTSEC3, FM1@DTSEC4, FM1@DTSEC5, FM1@DTSEC6, FM1@TGEC1, FM1@TGEC2, e1000#0 [PRIME] Warning: e1000#0 MAC addresses don't match: Address in SROM is 68:05:ca:3f:08:a3 Address in environment is 00:e0:0c:00:10:06 Hit any key to stop autoboot: 5  0 => => pci enum => setenv ipaddr 192.168.2.36 => setenv serverip 192.168.2.1 => setenv ethact e1000#0 => setenv qspi_faddr_fip 0x100000 => setenv qspi_faddr_fman_mc 0x900000 => setenv qspi_faddr_bl2 0x0 => setenv raddr_temp 0x82000000 => setenv raddr_temp_2 0x83000000 => setenv img_fip b28495/lsdk-firmware/ci_tfa_bl3/ls1046ardb/fip_ls1046ardb.bin => setenv img_fman_mc b28495/lsdk-firmware/qoriq-fm-ucode/fsl_fman_ucode_ls1046_r1.0_106_4_18.bin => setenv img_qspi_bl2 b28495/lsdk-firmware/ci_tfa_bl2/ls1046ardb/RR_FFSSPPPH_1133_5559/bl2_qspi_rcw_1800_qspiboot.pbl => tftpboot $raddr_temp $img_fip Using e1000#0 device TFTP from server 192.168.2.1; our IP address is 192.168.2.36 Filename 'b28495/lsdk-firmware/ci_tfa_bl3/ls1046ardb/fip_ls1046ardb.bin'. Load address: 0x82000000 Loading: *####################################################### 9.7 MiB/s done Bytes transferred = 805137 (c4911 hex) => echo $? 0 => sf probe 0:1 SF: Detected s25fl512s with page size 256 Bytes, erase size 256 KiB, total 64 MiB => echo $? 0 => sf read $raddr_temp_2 $qspi_faddr_fip $filesize device 0 offset 0x100000, size 0xc4911 SF: 805137 bytes @ 0x100000 Read: OK => echo $? 0 => if cmp.b $raddr_temp $raddr_temp_2 $filesize; then echo "No update";else sf erase $qspi_faddr_fip +$filesize && sf write $raddr_temp $qspi_faddr_fip $filesize; fi Total of 805137 byte(s) were the same No update => echo $? 0 => tftpboot $raddr_temp $img_fman_mc Using e1000#0 device TFTP from server 192.168.2.1; our IP address is 192.168.2.36 Filename 'b28495/lsdk-firmware/qoriq-fm-ucode/fsl_fman_ucode_ls1046_r1.0_106_4_18.bin'. Load address: 0x82000000 Loading: *### 5.2 MiB/s done Bytes transferred = 32604 (7f5c hex) => echo $? 0 => sf read $raddr_temp_2 $qspi_faddr_fman_mc $filesize device 0 offset 0x900000, size 0x7f5c SF: 32604 bytes @ 0x900000 Read: OK => echo $? 0 => if cmp.b $raddr_temp $raddr_temp_2 $filesize; then echo "No update";else sf erase $qspi_faddr_fman_mc +$filesize && sf write $raddr_temp $qspi_faddr_fman_mc $filesize; fi Total of 32604 byte(s) were the same No update => echo $? 0 => tftpboot $raddr_temp $img_qspi_bl2 Using e1000#0 device TFTP from server 192.168.2.1; our IP address is 192.168.2.36 Filename 'b28495/lsdk-firmware/ci_tfa_bl2/ls1046ardb/RR_FFSSPPPH_1133_5559/bl2_qspi_rcw_1800_qspiboot.pbl'. Load address: 0x82000000 Loading: *#### 8.8 KiB/s done Bytes transferred = 48920 (bf18 hex) => echo $? 0 => sf read $raddr_temp_2 $qspi_faddr_bl2 $filesize device 0 offset 0x0, size 0xbf18 SF: 48920 bytes @ 0x0 Read: OK => echo $? 0 => if cmp.b $raddr_temp $raddr_temp_2 $filesize; then echo "No update";else sf erase $qspi_faddr_bl2 +$filesize && sf write $raddr_temp $qspi_faddr_bl2 $filesize; fi Total of 48920 byte(s) were the same No update => echo $? 0 => cpld reset altbankNOTICE: UDIMM 18ASF2G72AZ-2G6E2 NOTICE: 16 GB DDR4, 64-bit, CL=15, ECC on, CS0+CS1 NOTICE: BL2: v1.5(release):LSDK-20.12-RC1-3-g9225ad51f NOTICE: BL2: Built : 16:45:03, Nov 12 2020 NOTICE: BL2: Booting BL31 NOTICE: BL31: v1.5(release):LSDK-20.12-Internal NOTICE: BL31: Built : 19:21:45, Nov 12 2020 NOTICE: Welcome to LS1046 BL31 Phase U-Boot 2020.04-21532-gc7ec91b (Nov 10 2020 - 17:42:33 +0800), Build: jenkins-dash-uboot_devel_build-362 SoC: LS1046AE Rev1.0 (0x87070010) Clock Configuration: CPU0(A72):1800 MHz CPU1(A72):1800 MHz CPU2(A72):1800 MHz CPU3(A72):1800 MHz Bus: 700 MHz DDR: 2100 MT/s FMAN: 800 MHz Reset Configuration Word (RCW): 00000000: 0e150012 10000000 00000000 00000000 00000010: 11335559 40005012 40025000 c1000000 00000020: 00000000 00000000 00000000 00238800 00000030: 20124000 00003101 00000096 00000001 Model: LS1046A RDB Board Board: LS1046ARDB, boot from QSPI vBank 4 CPLD: V2.2 PCBA: V2.0 SERDES Reference Clocks: SD1_CLK1 = 156.25MHZ, SD1_CLK2 = 100.00MHZ DRAM: 15.9 GiB (DDR4, 64-bit, CL=15, ECC on) DDR Chip-Select Interleaving Mode: CS0+CS1 SEC0: RNG instantiated Using SERDES1 Protocol: 4403 (0x1133) Using SERDES2 Protocol: 21849 (0x5559) NAND: 512 MiB MMC: FSL_SDHC: 0 Loading Environment from SPI Flash... SF: Detected s25fs512s with page size 256 Bytes, erase size 256 KiB, total 64 MiB OK EEPROM: NXID v1 In: serial Out: serial Err: serial Net: SF: Detected s25fs512s with page size 256 Bytes, erase size 256 KiB, total 64 MiB Fman1: Uploading microcode version 106.4.18 PCIe1: pcie@3400000 Root Complex: no link PCIe2: pcie@3500000 Root Complex: no link PCIe3: pcie@3600000 Root Complex: x1 gen1 e1000: 68:05:ca:3f:08:a3 FM1@DTSEC3, FM1@DTSEC4, FM1@DTSEC5, FM1@DTSEC6, FM1@TGEC1, FM1@TGEC2, e1000#0 [PRIME] Warning: e1000#0 MAC addresses don't match: Address in SROM is 68:05:ca:3f:08:a3 Address in environment is 00:e0:0c:00:10:06 => => => printenv arch=arm baudrate=115200 board=ls1046ardb board_name=ls1046ardb boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; env exists secureboot && load ${devtype} ${devnum}:${distro_bootpart} ${scripthdraddr} ${prefix}${boot_script_hdr}; env exists secureboot && esbc_validate ${scripthdraddr};source ${scriptaddr} boot_efi_binary=if fdt addr ${fdt_addr_r}; then bootefi bootmgr ${fdt_addr_r};else bootefi bootmgr ${fdtcontroladdr};fi;load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootaa64.efi; if fdt addr ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r};else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}${boot_syslinux_conf} boot_net_usb_start=usb start boot_pci_enum=pci enum boot_prefixes=/ /boot/ boot_script_dhcp=boot.scr.uimg boot_script_hdr=hdr_ls1046ardb_bs.out boot_scripts=ls1046ardb_boot.scr boot_syslinux_conf=extlinux/extlinux.conf boot_targets=scsi0 mmc0 usb0 dhcp bootargs=console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free) bootcmd=run distro_bootcmd; run qspi_bootcmd; env exists secureboot && esbc_halt;; bootcmd_dhcp=run boot_net_usb_start; run boot_pci_enum; if dhcp ${scriptaddr} ${boot_script_dhcp}; then source ${scriptaddr}; fi;setenv efi_fdtfile ${fdtfile}; setenv efi_old_vci ${bootp_vci};setenv efi_old_arch ${bootp_arch};setenv bootp_vci PXEClient:Arch:00011:UNDI:003000;setenv bootp_arch 0xb;if dhcp ${kernel_addr_r}; then tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};if fdt addr ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r}; else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi;fi;setenv bootp_vci ${efi_old_vci};setenv bootp_arch ${efi_old_arch};setenv efi_fdtfile;setenv efi_old_arch;setenv efi_old_vci; bootcmd_mmc0=devnum=0; run mmc_boot bootcmd_scsi0=devnum=0; run scsi_boot bootcmd_usb0=devnum=0; run usb_boot bootdelay=-1 bootm_size=0x10000000 console=ttyS0,115200 cpu=armv8 distro_bootcmd=scsi_need_init=; setenv nvme_need_init; for target in ${boot_targets}; do run bootcmd_${target}; done efi_dtb_prefixes=/ /dtb/ /dtb/current/ eth10addr=00:E0:0C:00:10:0a eth11addr=00:E0:0C:00:10:0b eth12addr=00:E0:0C:00:10:0c eth13addr=00:E0:0C:00:10:0d eth14addr=00:E0:0C:00:10:0e eth15addr=00:E0:0C:00:10:0f eth1addr=00:E0:0C:00:10:01 eth2addr=00:E0:0C:00:10:02 eth3addr=00:E0:0C:00:10:03 eth4addr=00:E0:0C:00:10:04 eth5addr=00:E0:0C:00:10:05 eth6addr=00:E0:0C:00:10:06 eth7addr=00:E0:0C:00:10:07 eth8addr=00:E0:0C:00:10:08 eth9addr=00:E0:0C:00:10:09 ethact=e1000#0 ethaddr=00:E0:0C:00:10:00 ethprime=e1000#0 fdt_addr=0x64f00000 fdt_addr_r=0x90000000 fdtcontroladdr=fbc26320 fdtheader_addr_r=0x80100000 fman_ucode=fbc3be90 hwconfig=fsl_ddr:bank_intlv=auto ipaddr=192.168.2.36 kernel_addr=0x61000000 kernel_addr_r=0x81000000 kernel_addr_sd=0x8000 kernel_load=0xa0000000 kernel_size=0x2800000 kernel_size_sd=0x14000 kernel_start=0x1000000 kernelhdr_addr_sd=0x3000 kernelhdr_size_sd=0x10 kernelheader_addr_r=0x80200000 kernelheader_size=0x40000 kernelheader_start=0x600000 load_addr=0xa0000000 load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${efi_fdtfile} mmc_boot=if mmc dev ${devnum}; then devtype=mmc; run scan_dev_for_boot_part; fi mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free) nand_bootcmd=echo Trying load from nand..;nand info; nand read $load_addr $kernel_start $kernel_size; env exists secureboot && nand read $kernelheader_addr_r $kernelheader_start $kernelheader_size && esbc_validate ${kernelheader_addr_r}; bootm $load_addr#$board nor_bootcmd=echo Trying load from nor..;cp.b $kernel_addr $load_addr $kernel_size; env exists secureboot && cp.b $kernelheader_addr $kernelheader_addr_r $kernelheader_size && esbc_validate ${kernelheader_addr_r}; bootm $load_addr#$board nvme_boot=run boot_pci_enum; run nvme_init; if nvme dev ${devnum}; then devtype=nvme; run scan_dev_for_boot_part; fi nvme_init=if ${nvme_need_init}; then setenv nvme_need_init false; nvme scan; fi qspi_bootcmd=echo Trying load from qspi..;sf probe && sf read $load_addr $kernel_start $kernel_size; env exists secureboot && sf read $kernelheader_addr_r $kernelheader_start $kernelheader_size && esbc_validate ${kernelheader_addr_r}; bootm $load_addr#$board ramdisk_addr=0x800000 ramdisk_addr_r=0xa0000000 ramdisk_size=0x2000000 scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;run scan_dev_for_efi; scan_dev_for_boot_part=part list ${devtype} ${devnum} devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then run scan_dev_for_boot; fi; done scan_dev_for_efi=setenv efi_fdtfile ${fdtfile}; for prefix in ${efi_dtb_prefixes}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${efi_fdtfile}; then run load_efi_dtb; fi;done;if test -e ${devtype} ${devnum}:${distro_bootpart} efi/boot/bootaa64.efi; then echo Found EFI removable media binary efi/boot/bootaa64.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...; fi; setenv efi_fdtfile scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${boot_syslinux_conf}; then echo Found ${prefix}${boot_syslinux_conf}; run boot_extlinux; echo SCRIPT FAILED: continuing...; fi scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done scriptaddr=0x80000000 scripthdraddr=0x80080000 scsi_boot=run scsi_init; if scsi dev ${devnum}; then devtype=scsi; run scan_dev_for_boot_part; fi scsi_init=if ${scsi_need_init}; then scsi_need_init=false; scsi scan; fi sd_bootcmd=echo Trying load from SD ..;mmcinfo; mmc read $load_addr $kernel_addr_sd $kernel_size_sd && env exists secureboot && mmc read $kernelheader_addr_r $kernelhdr_addr_sd $kernelhdr_size_sd && esbc_validate ${kernelheader_addr_r};bootm $load_addr#$board serverip=192.168.2.1 soc=fsl-layerscape stderr=serial stdin=serial stdout=serial usb_boot=usb start; if usb dev ${devnum}; then devtype=usb; run scan_dev_for_boot_part; fi vendor=freescale Environment size: 6523/8188 bytes => setenv ethprime e1000#0 => setenv ipaddr 192.168.2.36 => setenv serverip 192.168.2.1 => setenv ethact e1000#0 => setenv hwconfig 'fsl_ddr:bank_intlv=auto' => setenv bootdelay -1 => setenv ethaddr 00:E0:0C:00:10:00 => setenv eth1addr 00:E0:0C:00:10:01 => setenv eth2addr 00:E0:0C:00:10:02 => setenv eth3addr 00:E0:0C:00:10:03 => setenv eth4addr 00:E0:0C:00:10:04 => setenv eth5addr 00:E0:0C:00:10:05 => setenv eth6addr 00:E0:0C:00:10:06 => setenv eth7addr 00:E0:0C:00:10:07 => setenv eth8addr 00:E0:0C:00:10:08 => setenv eth9addr 00:E0:0C:00:10:09 => setenv eth10addr 00:E0:0C:00:10:0a => setenv eth11addr 00:E0:0C:00:10:0b => setenv eth12addr 00:E0:0C:00:10:0c => setenv eth13addr 00:E0:0C:00:10:0d => setenv eth14addr 00:E0:0C:00:10:0e => setenv eth15addr 00:E0:0C:00:10:0f => printenv arch=arm baudrate=115200 board=ls1046ardb board_name=ls1046ardb boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; env exists secureboot && load ${devtype} ${devnum}:${distro_bootpart} ${scripthdraddr} ${prefix}${boot_script_hdr}; env exists secureboot && esbc_validate ${scripthdraddr};source ${scriptaddr} boot_efi_binary=if fdt addr ${fdt_addr_r}; then bootefi bootmgr ${fdt_addr_r};else bootefi bootmgr ${fdtcontroladdr};fi;load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootaa64.efi; if fdt addr ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r};else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}${boot_syslinux_conf} boot_net_usb_start=usb start boot_pci_enum=pci enum boot_prefixes=/ /boot/ boot_script_dhcp=boot.scr.uimg boot_script_hdr=hdr_ls1046ardb_bs.out boot_scripts=ls1046ardb_boot.scr boot_syslinux_conf=extlinux/extlinux.conf boot_targets=scsi0 mmc0 usb0 dhcp bootargs=console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free) bootcmd=run distro_bootcmd; run qspi_bootcmd; env exists secureboot && esbc_halt;; bootcmd_dhcp=run boot_net_usb_start; run boot_pci_enum; if dhcp ${scriptaddr} ${boot_script_dhcp}; then source ${scriptaddr}; fi;setenv efi_fdtfile ${fdtfile}; setenv efi_old_vci ${bootp_vci};setenv efi_old_arch ${bootp_arch};setenv bootp_vci PXEClient:Arch:00011:UNDI:003000;setenv bootp_arch 0xb;if dhcp ${kernel_addr_r}; then tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};if fdt addr ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r}; else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi;fi;setenv bootp_vci ${efi_old_vci};setenv bootp_arch ${efi_old_arch};setenv efi_fdtfile;setenv efi_old_arch;setenv efi_old_vci; bootcmd_mmc0=devnum=0; run mmc_boot bootcmd_scsi0=devnum=0; run scsi_boot bootcmd_usb0=devnum=0; run usb_boot bootdelay=-1 bootm_size=0x10000000 console=ttyS0,115200 cpu=armv8 distro_bootcmd=scsi_need_init=; setenv nvme_need_init; for target in ${boot_targets}; do run bootcmd_${target}; done efi_dtb_prefixes=/ /dtb/ /dtb/current/ eth10addr=00:E0:0C:00:10:0a eth11addr=00:E0:0C:00:10:0b eth12addr=00:E0:0C:00:10:0c eth13addr=00:E0:0C:00:10:0d eth14addr=00:E0:0C:00:10:0e eth15addr=00:E0:0C:00:10:0f eth1addr=00:E0:0C:00:10:01 eth2addr=00:E0:0C:00:10:02 eth3addr=00:E0:0C:00:10:03 eth4addr=00:E0:0C:00:10:04 eth5addr=00:E0:0C:00:10:05 eth6addr=00:E0:0C:00:10:06 eth7addr=00:E0:0C:00:10:07 eth8addr=00:E0:0C:00:10:08 eth9addr=00:E0:0C:00:10:09 ethact=e1000#0 ethaddr=00:E0:0C:00:10:00 ethprime=e1000#0 fdt_addr=0x64f00000 fdt_addr_r=0x90000000 fdtcontroladdr=fbc26320 fdtheader_addr_r=0x80100000 fman_ucode=fbc3be90 hwconfig=fsl_ddr:bank_intlv=auto ipaddr=192.168.2.36 kernel_addr=0x61000000 kernel_addr_r=0x81000000 kernel_addr_sd=0x8000 kernel_load=0xa0000000 kernel_size=0x2800000 kernel_size_sd=0x14000 kernel_start=0x1000000 kernelhdr_addr_sd=0x3000 kernelhdr_size_sd=0x10 kernelheader_addr_r=0x80200000 kernelheader_size=0x40000 kernelheader_start=0x600000 load_addr=0xa0000000 load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${efi_fdtfile} mmc_boot=if mmc dev ${devnum}; then devtype=mmc; run scan_dev_for_boot_part; fi mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free) nand_bootcmd=echo Trying load from nand..;nand info; nand read $load_addr $kernel_start $kernel_size; env exists secureboot && nand read $kernelheader_addr_r $kernelheader_start $kernelheader_size && esbc_validate ${kernelheader_addr_r}; bootm $load_addr#$board nor_bootcmd=echo Trying load from nor..;cp.b $kernel_addr $load_addr $kernel_size; env exists secureboot && cp.b $kernelheader_addr $kernelheader_addr_r $kernelheader_size && esbc_validate ${kernelheader_addr_r}; bootm $load_addr#$board nvme_boot=run boot_pci_enum; run nvme_init; if nvme dev ${devnum}; then devtype=nvme; run scan_dev_for_boot_part; fi nvme_init=if ${nvme_need_init}; then setenv nvme_need_init false; nvme scan; fi qspi_bootcmd=echo Trying load from qspi..;sf probe && sf read $load_addr $kernel_start $kernel_size; env exists secureboot && sf read $kernelheader_addr_r $kernelheader_start $kernelheader_size && esbc_validate ${kernelheader_addr_r}; bootm $load_addr#$board ramdisk_addr=0x800000 ramdisk_addr_r=0xa0000000 ramdisk_size=0x2000000 scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;run scan_dev_for_efi; scan_dev_for_boot_part=part list ${devtype} ${devnum} devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then run scan_dev_for_boot; fi; done scan_dev_for_efi=setenv efi_fdtfile ${fdtfile}; for prefix in ${efi_dtb_prefixes}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${efi_fdtfile}; then run load_efi_dtb; fi;done;if test -e ${devtype} ${devnum}:${distro_bootpart} efi/boot/bootaa64.efi; then echo Found EFI removable media binary efi/boot/bootaa64.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...; fi; setenv efi_fdtfile scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${boot_syslinux_conf}; then echo Found ${prefix}${boot_syslinux_conf}; run boot_extlinux; echo SCRIPT FAILED: continuing...; fi scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done scriptaddr=0x80000000 scripthdraddr=0x80080000 scsi_boot=run scsi_init; if scsi dev ${devnum}; then devtype=scsi; run scan_dev_for_boot_part; fi scsi_init=if ${scsi_need_init}; then scsi_need_init=false; scsi scan; fi sd_bootcmd=echo Trying load from SD ..;mmcinfo; mmc read $load_addr $kernel_addr_sd $kernel_size_sd && env exists secureboot && mmc read $kernelheader_addr_r $kernelhdr_addr_sd $kernelhdr_size_sd && esbc_validate ${kernelheader_addr_r};bootm $load_addr#$board serverip=192.168.2.1 soc=fsl-layerscape stderr=serial stdin=serial stdout=serial usb_boot=usb start; if usb dev ${devnum}; then devtype=usb; run scan_dev_for_boot_part; fi vendor=freescale Environment size: 6523/8188 bytes => cpld reset altbankNOTICE: UDIMM 18ASF2G72AZ-2G6E2 NOTICE: 16 GB DDR4, 64-bit, CL=15, ECC on, CS0+CS1 NOTICE: BL2: v1.5(release):LSDK-20.12-RC1-3-g9225ad51f NOTICE: BL2: Built : 16:45:03, Nov 12 2020 NOTICE: BL2: Booting BL31 NOTICE: BL31: v1.5(release):LSDK-20.12-Internal NOTICE: BL31: Built : 19:21:45, Nov 12 2020 NOTICE: Welcome to LS1046 BL31 Phase U-Boot 2020.04-21532-gc7ec91b (Nov 10 2020 - 17:42:33 +0800), Build: jenkins-dash-uboot_devel_build-362 SoC: LS1046AE Rev1.0 (0x87070010) Clock Configuration: CPU0(A72):1800 MHz CPU1(A72):1800 MHz CPU2(A72):1800 MHz CPU3(A72):1800 MHz Bus: 700 MHz DDR: 2100 MT/s FMAN: 800 MHz Reset Configuration Word (RCW): 00000000: 0e150012 10000000 00000000 00000000 00000010: 11335559 40005012 40025000 c1000000 00000020: 00000000 00000000 00000000 00238800 00000030: 20124000 00003101 00000096 00000001 Model: LS1046A RDB Board Board: LS1046ARDB, boot from QSPI vBank 4 CPLD: V2.2 PCBA: V2.0 SERDES Reference Clocks: SD1_CLK1 = 156.25MHZ, SD1_CLK2 = 100.00MHZ DRAM: 15.9 GiB (DDR4, 64-bit, CL=15, ECC on) DDR Chip-Select Interleaving Mode: CS0+CS1 SEC0: RNG instantiated Using SERDES1 Protocol: 4403 (0x1133) Using SERDES2 Protocol: 21849 (0x5559) NAND: 512 MiB MMC: FSL_SDHC: 0 Loading Environment from SPI Flash... SF: Detected s25fs512s with page size 256 Bytes, erase size 256 KiB, total 64 MiB OK EEPROM: NXID v1 In: serial Out: serial Err: serial Net: SF: Detected s25fs512s with page size 256 Bytes, erase size 256 KiB, total 64 MiB Fman1: Uploading microcode version 106.4.18 PCIe1: pcie@3400000 Root Complex: no link PCIe2: pcie@3500000 Root Complex: no link PCIe3: pcie@3600000 Root Complex: x1 gen1 e1000: 68:05:ca:3f:08:a3 FM1@DTSEC3, FM1@DTSEC4, FM1@DTSEC5, FM1@DTSEC6, FM1@TGEC1, FM1@TGEC2, e1000#0 [PRIME] Warning: e1000#0 MAC addresses don't match: Address in SROM is 68:05:ca:3f:08:a3 Address in environment is 00:e0:0c:00:10:06 => => => pci enum => setenv ipaddr 192.168.2.36 => setenv serverip 192.168.2.1 => setenv ethact e1000#0 => setenv rootpath /dev/mmcblk0p4 => setenv othbootargs console=ttyS0,115200 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x40000000 => setenv raddr_linux 0x82000000 => setenv raddr_hw_dt 0x8f000000 => setenv img_linux_ubuntu b28495/lsdk-lts/images/armv8-dpaa1/arm64-dpaa1-caam-qi/vmlinuz => setenv img_hw_dt_ubuntu b28495/lsdk-lts/images/armv8/default-arm64/fsl-ls1046a-rdb-sdk.dtb => setenv img_device => setenv dtb_device => setenv img_storage_type => setenv dtb_storage_type => setenv img_load_cmd tftpboot => setenv dtb_load_cmd tftpboot => setenv bootargs root=$rootpath rw rootdelay=10 $othbootargs => setenv bootcmd bootm $raddr_linux - $raddr_hw_dt => $img_load_cmd $img_storage_type $img_device $raddr_linux $img_linux_ubuntu Using e1000#0 device TFTP from server 192.168.2.1; our IP address is 192.168.2.36 Filename 'b28495/lsdk-lts/images/armv8-dpaa1/arm64-dpaa1-caam-qi/vmlinuz'. Load address: 0x82000000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ## 10.4 MiB/s done Bytes transferred = 14339841 (dacf01 hex) => echo $? 0 => $dtb_load_cmd $dtb_storage_type $dtb_device $raddr_hw_dt $img_hw_dt_ubuntu Using e1000#0 device TFTP from server 192.168.2.1; our IP address is 192.168.2.36 Filename 'b28495/lsdk-lts/images/armv8/default-arm64/fsl-ls1046a-rdb-sdk.dtb'. Load address: 0x8f000000 Loading: *### 6 MiB/s done Bytes transferred = 31619 (7b83 hex) => echo $? 0 => boot ## Booting kernel from Legacy Image at 82000000 ... Image Name: linux- Image Type: AArch64 Linux Kernel Image (gzip compressed) Data Size: 14339777 Bytes = 13.7 MiB Load Address: 80080000 Entry Point: 80080000 Verifying Checksum ... OK ## Flattened Device Tree blob at 8f000000 Booting using the fdt blob at 0x8f000000 Uncompressing Kernel Image Loading Device Tree to 000000008ffe5000, end 000000008ffffb82 ... OK WARNING failed to get smmu node: FDT_ERR_NOTFOUND WARNING failed to get smmu node: FDT_ERR_NOTFOUND Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd082] [ 0.000000] Linux version 5.4.47-00091-g9ee73a94f0d0 (jenkins@roc15) (gcc version 7.5.0 (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04)) #1 SMP PREEMPT Sat Nov 7 00:21:15 CST 2020 [ 0.000000] Machine model: LS1046A RDB Board [ 0.000000] earlycon: uart8250 at MMIO 0x00000000021c0500 (options '') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: UEFI not found. [ 0.000000] OF: reserved mem: initialized node qman-fqd, compatible id fsl,qman-fqd [ 0.000000] OF: reserved mem: initialized node qman-pfdr, compatible id fsl,qman-pfdr [ 0.000000] OF: reserved mem: initialized node bman-fbpr, compatible id fsl,bman-fbpr [ 0.000000] cma: Reserved 320 MiB at 0x00000000e7c00000 [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x0000000bff7fffff] [ 0.000000] NUMA: NODE_DATA [mem 0xbfa803800-0xbfa804fff] [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x0000000bff7fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000fbdfffff] [ 0.000000] node 0: [mem 0x0000000880000000-0x0000000bfbffffff] [ 0.000000] node 0: [mem 0x0000000bff000000-0x0000000bff7fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000bff7fffff] [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 24 pages/cpu s59928 r8192 d30184 u98304 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: EL2 vector hardening [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] Speculative Store Bypass Disable mitigation not required [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4097760 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/mmcblk0p4 rw rootdelay=10 console=ttyS0,115200 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x40000000 [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0xe3c00000-0xe7c00000] (64MB) [ 0.000000] Memory: 15901380K/16652288K available (18748K kernel code, 2432K rwdata, 9124K rodata, 5952K init, 1001K bss, 423228K reserved, 327680K cma-reserved) [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Adjusting CPU interface base to 0x000000000142f000 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x458 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns [ 0.000001] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns [ 0.008421] Console: colour dummy device 80x25 [ 0.012917] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000) [ 0.023326] pid_max: default: 32768 minimum: 301 [ 0.028013] LSM: Security Framework initializing [ 0.032744] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.040419] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.072498] ASID allocator initialised with 32768 entries [ 0.085933] rcu: Hierarchical SRCU implementation. [ 0.099584] EFI services will not be available. [ 0.112145] smp: Bringing up secondary CPUs ... [ 0.148822] Detected PIPT I-cache on CPU1 [ 0.148844] CPU1: Booted secondary processor 0x0000000001 [0x410fd082] [ 0.180833] Detected PIPT I-cache on CPU2 [ 0.180846] CPU2: Booted secondary processor 0x0000000002 [0x410fd082] [ 0.212857] Detected PIPT I-cache on CPU3 [ 0.212870] CPU3: Booted secondary processor 0x0000000003 [0x410fd082] [ 0.212898] smp: Brought up 1 node, 4 CPUs [ 0.248767] SMP: Total of 4 processors activated. [ 0.253493] CPU features: detected: 32-bit EL0 Support [ 0.258662] CPU features: detected: CRC32 instructions [ 0.271424] CPU: All CPU(s) started at EL2 [ 0.275545] alternatives: patching kernel code [ 0.280556] devtmpfs: initialized [ 0.286364] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.296165] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.306025] xor: measuring software checksum speed [ 0.348189] 8regs : 7602.000 MB/sec [ 0.392204] 32regs : 7793.000 MB/sec [ 0.436221] arm64_neon: 7531.000 MB/sec [ 0.440421] xor: using function: 32regs (7793.000 MB/sec) [ 0.445848] pinctrl core: initialized pinctrl subsystem [ 0.451597] DMI not present or invalid. [ 0.455602] NET: Registered protocol family 16 [ 0.460610] DMA: preallocated 256 KiB pool for atomic allocations [ 0.466737] audit: initializing netlink subsys (disabled) [ 0.472230] audit: type=2000 audit(0.428:1): state=initialized audit_enabled=0 res=1 [ 0.480026] cpuidle: using governor menu [ 0.484044] Bman ver:0a02,02,01 [ 0.489066] qman-fqd addr 0x0000000bff800000 size 0x800000 [ 0.494578] qman-pfdr addr 0x0000000bfc000000 size 0x2000000 [ 0.500266] Qman ver:0a01,03,02,01 [ 0.503790] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.511145] Serial: AMBA PL011 UART driver [ 0.515298] imx mu driver is registered. [ 0.519241] imx rpmsg driver is registered. [ 0.528527] Machine: LS1046A RDB Board [ 0.532292] SoC family: QorIQ LS1046A [ 0.535966] SoC ID: svr:0x87070010, Revision: 1.0 [ 0.556534] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.563278] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.570015] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.576750] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 1.053715] cryptd: max_cpu_qlen set to 1000 [ 1.074947] DRBG: Continuing without Jitter RNG [ 1.147727] raid6: neonx8 gen() 4349 MB/s [ 1.219746] raid6: neonx8 xor() 3750 MB/s [ 1.291782] raid6: neonx4 gen() 3693 MB/s [ 1.363799] raid6: neonx4 xor() 3393 MB/s [ 1.435835] raid6: neonx2 gen() 2901 MB/s [ 1.507857] raid6: neonx2 xor() 2943 MB/s [ 1.579879] raid6: neonx1 gen() 2199 MB/s [ 1.651908] raid6: neonx1 xor() 2250 MB/s [ 1.723962] raid6: int64x8 gen() 2051 MB/s [ 1.795976] raid6: int64x8 xor() 1624 MB/s [ 1.867998] raid6: int64x4 gen() 2074 MB/s [ 1.940023] raid6: int64x4 xor() 1531 MB/s [ 2.012358] raid6: int64x2 gen() 1520 MB/s [ 2.084681] raid6: int64x2 xor() 1238 MB/s [ 2.157038] raid6: int64x1 gen() 1078 MB/s [ 2.229371] raid6: int64x1 xor() 933 MB/s [ 2.233659] raid6: using algorithm neonx8 gen() 4349 MB/s [ 2.239082] raid6: .... xor() 3750 MB/s, rmw enabled [ 2.244069] raid6: using neon recovery algorithm [ 2.249211] ACPI: Interpreter disabled. [ 2.254951] iommu: Default domain type: Passthrough [ 2.260060] vgaarb: loaded [ 2.262905] SCSI subsystem initialized [ 2.266819] usbcore: registered new interface driver usbfs [ 2.272349] usbcore: registered new interface driver hub [ 2.277710] usbcore: registered new device driver usb [ 2.283305] i2c i2c-0: IMX I2C adapter registered [ 2.288045] i2c i2c-0: using dma0chan16 (tx) and dma0chan17 (rx) for DMA transfers [ 2.295824] i2c i2c-1: IMX I2C adapter registered [ 2.301109] mc: Linux media interface: v0.10 [ 2.305410] videodev: Linux video capture interface: v2.00 [ 2.310949] pps_core: LinuxPPS API ver. 1 registered [ 2.315937] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.325123] PTP clock support registered [ 2.329154] EDAC MC: Ver: 3.0.0 [ 2.332941] bman-fbpr addr 0x0000000bfe000000 size 0x1000000 [ 2.338647] Bman err interrupt handler present [ 2.343522] Bman portal initialised, cpu 0 [ 2.347698] Bman portal initialised, cpu 1 [ 2.351874] Bman portal initialised, cpu 2 [ 2.356048] Bman portal initialised, cpu 3 [ 2.360164] Bman portals initialised [ 2.364522] Qman err interrupt handler present [ 2.369278] QMan: Allocated lookup table at (____ptrval____), entry count 131073 [ 2.377100] Qman portal initialised, cpu 0 [ 2.381270] Qman portal initialised, cpu 1 [ 2.385436] Qman portal initialised, cpu 2 [ 2.389605] Qman portal initialised, cpu 3 [ 2.393720] Qman portals initialised [ 2.397357] Bman: BPID allocator includes range 32:32 [ 2.402462] Qman: FQID allocator includes range 256:256 [ 2.407712] Qman: FQID allocator includes range 32768:32768 [ 2.413343] Qman: CGRID allocator includes range 0:256 [ 2.418635] Qman: pool channel allocator includes range 1025:15 [ 2.424645] No USDPAA memory, no 'fsl,usdpaa-mem' in device-tree [ 2.430945] fsl-ifc 1530000.ifc: Freescale Integrated Flash Controller [ 2.437520] fsl-ifc 1530000.ifc: IFC version 1.4, 8 banks [ 2.443081] FPGA manager framework [ 2.446532] Advanced Linux Sound Architecture Driver Initialized. [ 2.453200] clocksource: Switched to clocksource arch_sys_counter [ 2.459395] VFS: Disk quotas dquot_6.6.0 [ 2.463361] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.470347] pnp: PnP ACPI: disabled [ 2.476593] thermal_sys: Registered thermal governor 'step_wise' [ 2.476595] thermal_sys: Registered thermal governor 'power_allocator' [ 2.482935] NET: Registered protocol family 2 [ 2.494059] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 2.502816] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 2.511395] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 2.519274] TCP: Hash tables configured (established 131072 bind 65536) [ 2.525966] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 2.532958] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 2.540456] NET: Registered protocol family 1 [ 2.545007] RPC: Registered named UNIX socket transport module. [ 2.550961] RPC: Registered udp transport module. [ 2.555687] RPC: Registered tcp transport module. [ 2.560412] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.566888] PCI: CLS 0 bytes, default 64 [ 2.571206] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 2.579659] kvm [1]: IPA Size Limit: 44bits [ 2.584281] kvm [1]: vgic interrupt IRQ1 [ 2.588278] kvm [1]: Hyp mode initialized successfully [ 2.600574] Initialise system trusted keyrings [ 2.605090] workingset: timestamp_bits=44 max_order=22 bucket_order=0 [ 2.611841] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.617818] NFS: Registering the id_resolver key type [ 2.622902] Key type id_resolver registered [ 2.627121] Key type id_legacy registered [ 2.631151] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.637895] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 2.644121] fuse: init (API version 7.31) [ 2.648212] 9p: Installing v9fs 9p2000 file system support [ 2.661400] Key type asymmetric registered [ 2.665520] Asymmetric key parser 'x509' registered [ 2.670432] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 2.677906] io scheduler mq-deadline registered [ 2.682460] io scheduler kyber registered [ 2.695828] layerscape-pcie 3400000.pcie: host bridge /soc/pcie@3400000 ranges: [ 2.703189] layerscape-pcie 3400000.pcie: IO 0x4000010000..0x400001ffff -> 0x00000000 [ 2.711330] layerscape-pcie 3400000.pcie: MEM 0x4040000000..0x407fffffff -> 0x40000000 [ 2.719534] layerscape-pcie 3400000.pcie: PCI host bridge to bus 0000:00 [ 2.726273] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.731786] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.737999] pci_bus 0000:00: root bus resource [mem 0x4040000000-0x407fffffff] (bus address [0x40000000-0x7fffffff]) [ 2.748590] pci 0000:00:00.0: [1957:81c0] type 01 class 0x060400 [ 2.754666] pci 0000:00:00.0: supports D1 D2 [ 2.758955] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot [ 2.766848] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 2.772208] pcieport 0000:00:00.0: PME: Signaling with IRQ 63 [ 2.778076] pcieport 0000:00:00.0: AER: enabled with IRQ 62 [ 2.783787] layerscape-pcie 3500000.pcie: host bridge /soc/pcie@3500000 ranges: [ 2.791147] layerscape-pcie 3500000.pcie: IO 0x4800010000..0x480001ffff -> 0x00000000 [ 2.799287] layerscape-pcie 3500000.pcie: MEM 0x4840000000..0x487fffffff -> 0x40000000 [ 2.807480] layerscape-pcie 3500000.pcie: PCI host bridge to bus 0001:00 [ 2.814218] pci_bus 0001:00: root bus resource [bus 00-ff] [ 2.819731] pci_bus 0001:00: root bus resource [io 0x10000-0x1ffff] (bus address [0x0000-0xffff]) [ 2.828741] pci_bus 0001:00: root bus resource [mem 0x4840000000-0x487fffffff] (bus address [0x40000000-0x7fffffff]) [ 2.839329] pci 0001:00:00.0: [1957:81c0] type 01 class 0x060400 [ 2.845399] pci 0001:00:00.0: supports D1 D2 [ 2.849688] pci 0001:00:00.0: PME# supported from D0 D1 D2 D3hot [ 2.857560] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 2.862902] pcieport 0001:00:00.0: PME: Signaling with IRQ 65 [ 2.868757] pcieport 0001:00:00.0: AER: enabled with IRQ 64 [ 2.874463] layerscape-pcie 3600000.pcie: host bridge /soc/pcie@3600000 ranges: [ 2.881822] layerscape-pcie 3600000.pcie: IO 0x5000010000..0x500001ffff -> 0x00000000 [ 2.889962] layerscape-pcie 3600000.pcie: MEM 0x5040000000..0x507fffffff -> 0x40000000 [ 2.898168] layerscape-pcie 3600000.pcie: PCI host bridge to bus 0002:00 [ 2.904911] pci_bus 0002:00: root bus resource [bus 00-ff] [ 2.910426] pci_bus 0002:00: root bus resource [io 0x20000-0x2ffff] (bus address [0x0000-0xffff]) [ 2.919436] pci_bus 0002:00: root bus resource [mem 0x5040000000-0x507fffffff] (bus address [0x40000000-0x7fffffff]) [ 2.930025] pci 0002:00:00.0: [1957:81c0] type 01 class 0x060400 [ 2.936095] pci 0002:00:00.0: supports D1 D2 [ 2.940385] pci 0002:00:00.0: PME# supported from D0 D1 D2 D3hot [ 2.947431] pci 0002:01:00.0: [8086:10d3] type 00 class 0x020000 [ 2.953546] pci 0002:01:00.0: reg 0x10: [mem 0x5040000000-0x504001ffff] [ 2.960225] pci 0002:01:00.0: reg 0x14: [mem 0x5040080000-0x50400fffff] [ 2.966903] pci 0002:01:00.0: reg 0x18: [io 0x21000-0x2101f] [ 2.972707] pci 0002:01:00.0: reg 0x1c: [mem 0x5040100000-0x5040103fff] [ 2.979443] pci 0002:01:00.0: reg 0x30: [mem 0x5040140000-0x504017ffff pref] [ 2.986730] pci 0002:01:00.0: PME# supported from D0 D3hot D3cold [ 3.002098] pci 0002:00:00.0: BAR 14: assigned [mem 0x5040000000-0x50400fffff] [ 3.009362] pci 0002:00:00.0: BAR 13: assigned [io 0x20000-0x20fff] [ 3.015751] pci 0002:01:00.0: BAR 1: assigned [mem 0x5040000000-0x504007ffff] [ 3.022934] pci 0002:01:00.0: BAR 6: assigned [mem 0x5040080000-0x50400bffff pref] [ 3.030545] pci 0002:01:00.0: BAR 0: assigned [mem 0x50400c0000-0x50400dffff] [ 3.037727] pci 0002:01:00.0: BAR 3: assigned [mem 0x50400e0000-0x50400e3fff] [ 3.044909] pci 0002:01:00.0: BAR 2: assigned [io 0x20000-0x2001f] [ 3.051218] pci 0002:00:00.0: PCI bridge to [bus 01-ff] [ 3.056469] pci 0002:00:00.0: bridge window [io 0x20000-0x20fff] [ 3.062769] pci 0002:00:00.0: bridge window [mem 0x5040000000-0x50400fffff] [ 3.070035] pcieport 0002:00:00.0: PME: Signaling with IRQ 67 [ 3.075893] pcieport 0002:00:00.0: AER: enabled with IRQ 66 [ 3.082758] EINJ: ACPI disabled. [ 3.091474] Bus freq driver module loaded [ 3.100270] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.107856] printk: console [ttyS0] disabled [ 3.112174] 21c0500.serial: ttyS0 at MMIO 0x21c0500 (irq = 39, base_baud = 21875000) is a 16550A [ 3.121023] printk: console [ttyS0] enabled [ 3.121023] printk: console [ttyS0] enabled [ 3.129399] printk: bootconsole [uart8250] disabled [ 3.129399] printk: bootconsole [uart8250] disabled [ 3.139385] 21c0600.serial: ttyS1 at MMIO 0x21c0600 (irq = 39, base_baud = 21875000) is a 16550A [ 3.148571] SuperH (H)SCI(F) driver initialized [ 3.153627] msm_serial: driver initialized [ 3.165226] brd: module loaded [ 3.171214] loop: module loaded [ 3.175703] at24 0-0052: 65536 byte 24c512 EEPROM, writable, 1 bytes/write [ 3.183845] at24 0-0053: 65536 byte 24c512 EEPROM, writable, 1 bytes/write [ 3.192205] imx ahci driver is registered. [ 3.196604] ahci-qoriq 3200000.sata: 3200000.sata supply ahci not found, using dummy regulator [ 3.205239] ahci-qoriq 3200000.sata: 3200000.sata supply phy not found, using dummy regulator [ 3.213780] ahci-qoriq 3200000.sata: 3200000.sata supply target not found, using dummy regulator [ 3.222617] ahci-qoriq 3200000.sata: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 3.231575] ahci-qoriq 3200000.sata: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst [ 3.241482] scsi host0: ahci-qoriq [ 3.244969] ata1: SATA max UDMA/133 mmio [mem 0x03200000-0x0320ffff] port 0x100 irq 49 [ 3.253960] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xac [ 3.260311] nand: Micron MT29F4G08ABBEAH4 [ 3.264316] nand: 512 MiB, SLC, erase size: 256 KiB, page size: 4096, OOB size: 224 [ 3.272522] Bad block table found at page 131008, version 0x01 [ 3.279396] Bad block table found at page 130944, version 0x01 [ 3.285748] nand_read_bbt: bad block at 0x000004b00000 [ 3.290881] nand_read_bbt: bad block at 0x000006400000 [ 3.296634] fsl,ifc-nand 7e800000.nand: IFC NAND device at 0x7e800000, bank 0 [ 3.304851] spi-nor spi0.0: s25fs512s (65536 Kbytes) [ 3.313594] spi-nor spi0.1: s25fs512s (65536 Kbytes) [ 3.323229] libphy: Fixed MDIO Bus: probed [ 3.327634] tun: Universal TUN/TAP device driver, 1.6 [ 3.333316] thunder_xcv, ver 1.0 [ 3.336548] thunder_bgx, ver 1.0 [ 3.339785] nicpf, ver 1.0 [ 3.342834] libphy: Freescale XGMAC MDIO Bus: probed [ 3.349070] libphy: Freescale XGMAC MDIO Bus: probed [ 3.355618] libphy: Freescale XGMAC MDIO Bus: probed [ 3.360752] libphy: Freescale XGMAC MDIO Bus: probed [ 3.365889] libphy: Freescale XGMAC MDIO Bus: probed [ 3.371021] libphy: Freescale XGMAC MDIO Bus: probed [ 3.376151] libphy: Freescale XGMAC MDIO Bus: probed [ 3.381290] libphy: Freescale XGMAC MDIO Bus: probed [ 3.386419] libphy: Freescale XGMAC MDIO Bus: probed [ 3.391547] libphy: Freescale XGMAC MDIO Bus: probed [ 3.405318] Freescale FM module, FMD API version 21.1.0 [ 3.412720] Freescale FM Ports module [ 3.416381] fsl_mac: fsl_mac: FSL FMan MAC API based driver [ 3.422122] fsl_mac 1ae4000.ethernet: FMan MEMAC [ 3.426739] fsl_mac 1ae4000.ethernet: FMan MAC address: 00:e0:0c:00:10:00 [ 3.433615] fsl_mac 1ae6000.ethernet: FMan MEMAC [ 3.438230] fsl_mac 1ae6000.ethernet: FMan MAC address: 00:e0:0c:00:10:01 [ 3.445148] fsl_mac 1ae8000.ethernet: FMan MEMAC [ 3.449763] fsl_mac 1ae8000.ethernet: FMan MAC address: 00:e0:0c:00:10:02 [ 3.456680] fsl_mac 1aea000.ethernet: FMan MEMAC [ 3.461298] fsl_mac 1aea000.ethernet: FMan MAC address: 00:e0:0c:00:10:03 [ 3.468177] fsl_mac 1af0000.ethernet: FMan MEMAC [ 3.472792] fsl_mac 1af0000.ethernet: FMan MAC address: 00:e0:0c:00:10:04 [ 3.479806] fsl_mac 1af2000.ethernet: FMan MEMAC [ 3.484425] fsl_mac 1af2000.ethernet: FMan MAC address: 00:e0:0c:00:10:05 [ 3.491232] fsl_dpa: FSL DPAA Ethernet driver [ 3.496916] fsl_dpa: fsl_dpa: Probed interface eth0 [ 3.502924] fsl_dpa: fsl_dpa: Probed interface eth1 [ 3.509038] fsl_dpa: fsl_dpa: Probed interface eth2 [ 3.515267] fsl_dpa: fsl_dpa: Probed interface eth3 [ 3.521638] fsl_dpa: fsl_dpa: Probed interface eth4 [ 3.528106] fsl_dpa: fsl_dpa: Probed interface eth5 [ 3.533002] fsl_advanced: FSL DPAA Advanced drivers: [ 3.537960] fsl_proxy: FSL DPAA Proxy initialization driver [ 3.543648] fsl_oh: FSL FMan Offline Parsing port driver [ 3.549535] hclge is initializing [ 3.552840] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 3.560056] hns3: Copyright (c) 2017 Huawei Corporation. [ 3.565382] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 3.572425] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 3.578183] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.584009] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.590168] e1000e 0002:01:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.645646] e1000e 0002:01:00.0 0002:01:00.0 (uninitialized): registered PHC clock [ 3.707079] e1000e 0002:01:00.0 eth6: (PCI Express:2.5GT/s:Width x1) 68:05:ca:3f:08:a3 [ 3.715002] e1000e 0002:01:00.0 eth6: Intel(R) PRO/1000 Network Connection [ 3.721884] e1000e 0002:01:00.0 eth6: MAC: 3, PHY: 8, PBA No: E46981-008 [ 3.728612] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k [ 3.729208] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.735571] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.747328] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k [ 3.755153] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 3.761378] sky2: driver version 1.30 [ 3.765551] usbcore: registered new interface driver r8152 [ 3.771044] usbcore: registered new interface driver asix [ 3.776453] usbcore: registered new interface driver ax88179_178a [ 3.780465] ata1.00: ATA-7: ST380815AS, 4.AAB, max UDMA/133 [ 3.782803] VFIO - User Level meta-driver version: 0.3 [ 3.788108] ata1.00: 156301488 sectors, multi 0: LBA48 NCQ (depth 32) [ 3.799903] dwc3 2f00000.usb: Failed to get clk 'ref': -2 [ 3.805598] dwc3 3000000.usb: Failed to get clk 'ref': -2 [ 3.811414] dwc3 3100000.usb: Failed to get clk 'ref': -2 [ 3.818162] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.824687] ehci-pci: EHCI PCI platform driver [ 3.829138] ehci-platform: EHCI generic platform driver [ 3.834473] ehci-orion: EHCI orion driver [ 3.838566] ehci-exynos: EHCI EXYNOS driver [ 3.838780] ata1.00: configured for UDMA/133 [ 3.842821] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.847141] scsi 0:0:0:0: Direct-Access ATA ST380815AS B PQ: 0 ANSI: 5 [ 3.853187] ohci-pci: OHCI PCI platform driver [ 3.861537] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 3.865726] ohci-platform: OHCI generic platform driver [ 3.873379] sd 0:0:0:0: [sda] Write Protect is off [ 3.878696] ohci-exynos: OHCI EXYNOS driver [ 3.887563] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.887862] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.902097] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 3.909804] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010810 [ 3.919229] xhci-hcd xhci-hcd.0.auto: irq 46, io mem 0x02f00000 [ 3.920125] sda: sda1 sda2 sda3 sda4 [ 3.925443] hub 1-0:1.0: USB hub found [ 3.929304] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.932551] hub 1-0:1.0: 1 port detected [ 3.941171] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 3.946658] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 3.954314] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed [ 3.961034] hub 2-0:1.0: USB hub found [ 3.964789] hub 2-0:1.0: 1 port detected [ 3.968852] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 3.974340] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3 [ 3.982039] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010810 [ 3.991435] xhci-hcd xhci-hcd.1.auto: irq 47, io mem 0x03000000 [ 3.997597] hub 3-0:1.0: USB hub found [ 4.001351] hub 3-0:1.0: 1 port detected [ 4.005369] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 4.010853] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4 [ 4.018509] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 4.025237] hub 4-0:1.0: USB hub found [ 4.028986] hub 4-0:1.0: 1 port detected [ 4.033044] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 4.038534] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 5 [ 4.046235] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000002010810 [ 4.055638] xhci-hcd xhci-hcd.2.auto: irq 48, io mem 0x03100000 [ 4.061789] hub 5-0:1.0: USB hub found [ 4.065544] hub 5-0:1.0: 1 port detected [ 4.069563] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 4.075049] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 6 [ 4.082703] xhci-hcd xhci-hcd.2.auto: Host supports USB 3.0 SuperSpeed [ 4.089416] hub 6-0:1.0: USB hub found [ 4.093164] hub 6-0:1.0: 1 port detected [ 4.097424] usbcore: registered new interface driver usb-storage [ 4.105948] ftm-alarm 29d0000.timer: registered as rtc1 [ 4.117430] rtc-pcf2127-i2c 1-0051: registered as rtc0 [ 4.123167] i2c /dev entries driver [ 4.128680] ptp_qoriq: device tree node missing required elements, try automatic configuration [ 4.137348] pps pps0: new PPS source ptp1 [ 4.144275] imx2-wdt 2ad0000.watchdog: timeout 60 sec (nowayout=0) [ 4.151487] qoriq_cpufreq: Freescale QorIQ CPU frequency scaling driver [ 4.158410] sdhci: Secure Digital Host Controller Interface driver [ 4.164595] sdhci: Copyright(c) Pierre Ossman [ 4.169316] Synopsys Designware Multimedia Card Interface Driver [ 4.176177] sdhci-pltfm: SDHCI platform and OF driver helper [ 4.207906] mmc0: SDHCI controller on 1560000.esdhc [1560000.esdhc] using ADMA 64-bit [ 4.217566] ledtrig-cpu: registered to indicate activity on CPUs [ 4.224301] caam 1700000.crypto: Linux CAAM Queue I/F driver initialised [ 4.231215] caam 1700000.crypto: device ID = 0x0a11030100000000 (Era 8) [ 4.237836] caam 1700000.crypto: job rings = 3, qi = 1 [ 4.248634] random: fast init done [ 4.416325] mmc0: new ultra high speed SDR104 SDHC card at address aaaa [ 4.422121] caam 1700000.crypto: caam pkc algorithms registered in /proc/crypto [ 4.423209] mmcblk0: mmc0:aaaa SM32G 29.7 GiB [ 4.430688] caam_jr 1710000.jr: registering rng-caam [ 4.445523] mmcblk0: p1 p2 p3 p4 [ 4.545232] usb 3-1: new high-speed USB device number 2 using xhci-hcd [ 4.549990] alg: No test for authenc(hmac(md5),cbc(aes)) (authenc-hmac-md5-cbc-aes-caam-qi) [ 4.560176] alg: No test for echainiv(authenc(hmac(md5),cbc(aes))) (echainiv-authenc-hmac-md5-cbc-aes-caam-qi) [ 4.580017] alg: No test for echainiv(authenc(hmac(sha1),cbc(aes))) (echainiv-authenc-hmac-sha1-cbc-aes-caam-qi) [ 4.590274] alg: No test for authenc(hmac(sha224),cbc(aes)) (authenc-hmac-sha224-cbc-aes-caam-qi) [ 4.599213] alg: No test for echainiv(authenc(hmac(sha224),cbc(aes))) (echainiv-authenc-hmac-sha224-cbc-aes-caam-qi) [ 4.609257] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd [ 4.619370] alg: No test for echainiv(authenc(hmac(sha256),cbc(aes))) (echainiv-authenc-hmac-sha256-cbc-aes-caam-qi) [ 4.629965] alg: No test for authenc(hmac(sha384),cbc(aes)) (authenc-hmac-sha384-cbc-aes-caam-qi) [ 4.634241] usb-storage 2-1:1.0: USB Mass Storage device detected [ 4.638901] alg: No test for echainiv(authenc(hmac(sha384),cbc(aes))) (echainiv-authenc-hmac-sha384-cbc-aes-caam-qi) [ 4.645031] scsi host1: usb-storage 2-1:1.0 [ 4.665209] alg: No test for echainiv(authenc(hmac(sha512),cbc(aes))) (echainiv-authenc-hmac-sha512-cbc-aes-caam-qi) [ 4.675797] alg: No test for authenc(hmac(md5),cbc(des3_ede)) (authenc-hmac-md5-cbc-des3_ede-caam-qi) [ 4.685072] alg: No test for echainiv(authenc(hmac(md5),cbc(des3_ede))) (echainiv-authenc-hmac-md5-cbc-des3_ede-caam-qi) [ 4.697457] alg: No test for echainiv(authenc(hmac(sha1),cbc(des3_ede))) (echainiv-authenc-hmac-sha1-cbc-des3_ede-caam-qi) [ 4.710007] alg: No test for echainiv(authenc(hmac(sha224),cbc(des3_ede))) (echainiv-authenc-hmac-sha224-cbc-des3_ede-caam-qi) [ 4.722938] alg: No test for echainiv(authenc(hmac(sha256),cbc(des3_ede))) (echainiv-authenc-hmac-sha256-cbc-des3_ede-caam-qi) [ 4.735846] alg: No test for echainiv(authenc(hmac(sha384),cbc(des3_ede))) (echainiv-authenc-hmac-sha384-cbc-des3_ede-caam-qi) [ 4.748736] alg: No test for echainiv(authenc(hmac(sha512),cbc(des3_ede))) (echainiv-authenc-hmac-sha512-cbc-des3_ede-caam-qi) [ 4.760184] alg: No test for authenc(hmac(md5),cbc(des)) (authenc-hmac-md5-cbc-des-caam-qi) [ 4.768600] alg: No test for echainiv(authenc(hmac(md5),cbc(des))) (echainiv-authenc-hmac-md5-cbc-des-caam-qi) [ 4.780101] alg: No test for echainiv(authenc(hmac(sha1),cbc(des))) (echainiv-authenc-hmac-sha1-cbc-des-caam-qi) [ 4.791798] alg: No test for echainiv(authenc(hmac(sha224),cbc(des))) (echainiv-authenc-hmac-sha224-cbc-des-caam-qi) [ 4.803809] alg: No test for echainiv(authenc(hmac(sha256),cbc(des))) (echainiv-authenc-hmac-sha256-cbc-des-caam-qi) [ 4.815829] alg: No test for echainiv(authenc(hmac(sha384),cbc(des))) (echainiv-authenc-hmac-sha384-cbc-des-caam-qi) [ 4.827889] alg: No test for echainiv(authenc(hmac(sha512),cbc(des))) (echainiv-authenc-hmac-sha512-cbc-des-caam-qi) [ 4.839707] caam 1700000.crypto: algorithms registered in /proc/crypto [ 4.861881] usbcore: registered new interface driver usbhid [ 4.867456] usbhid: USB HID core driver [ 4.872559] Freescale USDPAA process driver [ 4.876743] fsl-usdpaa: no region found [ 4.880573] Freescale USDPAA process IRQ driver [ 4.887729] optee: probing for conduit method from DT. [ 4.892865] optee: api uid mismatch [ 4.900678] NET: Registered protocol family 26 [ 4.905134] u32 classifier [ 4.906376] usb-storage 3-1:1.0: USB Mass Storage device detected [ 4.907835] input device check on [ 4.917580] Actions configured [ 4.918059] scsi host2: usb-storage 3-1:1.0 [ 4.921387] Initializing XFRM netlink socket [ 4.929450] NET: Registered protocol family 10 [ 4.934366] Segment Routing with IPv6 [ 4.938062] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.944176] NET: Registered protocol family 17 [ 4.948625] NET: Registered protocol family 15 [ 4.953088] Bridge firewalling registered [ 4.957173] 8021q: 802.1Q VLAN Support v1.8 [ 4.961358] lib80211: common routines for IEEE802.11 drivers [ 4.967040] 9pnet: Installing 9P2000 support [ 4.971324] tsn generic netlink module v1 init... [ 4.976047] Key type dns_resolver registered [ 4.980487] registered taskstats version 1 [ 4.984581] Loading compiled-in X.509 certificates [ 4.990135] Btrfs loaded, crc32c=crc32c-generic [ 4.998816] rtc-pcf2127-i2c 1-0051: setting system clock to 2020-11-04T09:14:02 UTC (1604481242) [ 5.007843] ALSA device list: [ 5.010810] No soundcards found. [ 5.014313] Waiting 10 sec before mounting root device... [ 5.677961] scsi 1:0:0:0: Direct-Access SanDisk Ultra USB 3.0 1.00 PQ: 0 ANSI: 6 [ 5.686600] sd 1:0:0:0: [sdb] 30031872 512-byte logical blocks: (15.4 GB/14.3 GiB) [ 5.694913] sd 1:0:0:0: [sdb] Write Protect is off [ 5.699943] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 5.727156] sdb: sdb1 sdb2 sdb3 sdb4 [ 5.732850] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 6.021047] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 3.0 PMAP PQ: 0 ANSI: 6 [ 7.196186] sd 2:0:0:0: [sdc] 30728832 512-byte logical blocks: (15.7 GB/14.7 GiB) [ 7.203920] sd 2:0:0:0: [sdc] Write Protect is off [ 7.208821] sd 2:0:0:0: [sdc] No Caching mode page found [ 7.214132] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 7.247805] sdc: [ 7.251103] sd 2:0:0:0: [sdc] Attached SCSI removable disk [ 15.191055] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null) [ 15.199187] VFS: Mounted root (ext4 filesystem) on device 179:4. [ 15.209788] devtmpfs: mounted [ 15.214681] Freeing unused kernel memory: 5952K [ 15.225317] Run /sbin/init as init process [ 15.458458] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 15.482717] systemd[1]: Detected architecture arm64. Welcome to NXP LSDK 2012 devel! [ 15.527678] systemd[1]: Set hostname to . [ 15.689909] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 15.706972] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 15.762309] systemd[1]: Configuration file /lib/systemd/system/weston.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 15.813508] systemd[1]: Configuration file /lib/systemd/system/fmc.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 15.863073] random: systemd: uninitialized urandom read (16 bytes read) [ 15.870568] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 15.889318] random: systemd: uninitialized urandom read (16 bytes read) [ 15.896124] systemd[1]: Listening on LVM2 metadata daemon socket. [ OK ] Listening on LVM2 metadata daemon socket. [ 15.917316] random: systemd: uninitialized urandom read (16 bytes read) [ 15.924023] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ OK ] Listening on LVM2 poll daemon socket. [ OK ] Reached target Remote File Systems. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Listening on Journal Socket. Starting Set the console keyboard layout... Mounting Huge Pages File System... Starting Availability of block devices... Mounting POSIX Message Queue File System... [ OK ] Reached target Libvirt guests shutdown. [ OK ] Listening on Device-mapper event daemon FIFOs. Starting Monitoring of LVM2 mirrors…ng dmeventd or progress polling... [ OK ] Listening on Syslog Socket. [ OK ] Created slice system-serial\x2dgetty.slice. Mounting Kernel Debug File System... [ OK ] Listening on fsck to fsckd communication Socket. [ OK ] Reached target Swap. [ OK ] Created slice User and Session Slice. [ OK ] Reached target Slices. [ OK ] Listening on udev Control Socket. Starting udev Coldplug all Devices... [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Reached target Paths. [ OK ] Reached target Local Encrypted Volumes. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on Journal Audit Socket. Starting Remount Root and Kernel File Systems... [ 16.365252] EXT4-fs (mmcblk0p4): re-mounted. Opts: errors=remount-ro [ OK ] Listening on Journal Socket (/dev/log). Starting Journal Service... Starting Create Static Device Nodes in /dev... [ OK ] Started Set the console keyboard layout. [ OK ] Mounted Huge Pages File System. [ OK ] Started Availability of block devices. [ OK ] Started Journal Service. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Kernel Debug File System. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started LVM2 metadata daemon. Starting Load/Save Random Seed... Starting udev Kernel Device Manager... Starting Flush Journal to Persistent Storage... [ OK ] Started Load/Save Random Seed. [ OK ] Started udev Kernel Device Manager. [ OK ] Started udev Coldplug all Devices. [ 16.683710] systemd-journald[338]: Received request to flush runtime journal from PID 1 [ 16.696078] systemd-journald[338]: File /var/log/journal/f6694307b83c46c0800ed5ecface7630/system.journal corrupted or uncleanly shut down, renaming and replacing. [ OK ] Found device /dev/ttyS0. [ OK ] Started Flush Journal to Persistent Storage. [ 16.986562] fsl_dpa soc:fsl,dpaa:ethernet@9 fm1-mac10: renamed from eth5 [ 17.033719] fsl_dpa soc:fsl,dpaa:ethernet@2 fm1-mac3: renamed from eth0 [ 17.082422] fsl_dpa soc:fsl,dpaa:ethernet@4 fm1-mac5: renamed from eth2 [ 17.122150] fsl_dpa soc:fsl,dpaa:ethernet@3 fm1-mac4: renamed from eth1 [ 17.149623] fsl_dpa soc:fsl,dpaa:ethernet@8 fm1-mac9: renamed from eth4 [ 17.170218] fsl_dpa soc:fsl,dpaa:ethernet@5 fm1-mac6: renamed from eth3 [ 17.201927] e1000e 0002:01:00.0 enP2p1s0: renamed from eth6 [ 17.504866] random: crng init done [ 17.508281] random: 7 urandom warning(s) missed due to ratelimiting [ OK ] Started Monitoring of LVM2 mirrors,…sing dmeventd or progress polling. [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting ebtables ruleset management... Starting QEMU KVM preparation - module, ksm, hugepages... Starting Create Volatile Files and Directories... Starting Set console font and keymap... Mounting Boot Partition... [ 17.928286] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ OK ] Started QEMU KVM preparation - module, ksm, hugepages. [ OK ] Started Create Volatile Files and Directories. [ OK ] Started Set console font and keymap. [ OK ] Mounted Boot Partition. Starting Load Kernel Modules... Starting Update UTMP about System Boot/Shutdown... Starting Network Name Resolution... Starting Network Time Synchronization... [ OK ] Started Load Kernel Modules. Mounting FUSE Control File System... Mounting Kernel Configuration File System... Starting Apply Kernel Variables... [ OK ] Started Network Time Synchronization. [ OK ] Started Network Name Resolution. [ OK ] Started ebtables ruleset management. [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Mounted FUSE Control File System. [ OK ] Mounted Kernel Configuration File System. [ OK ] Started Apply Kernel Variables. [ OK ] Reached target Network (Pre). Starting Raise network interfaces... [ OK ] Reached target Host and Network Name Lookups. [ OK ] Reached target System Time Synchronized. [ OK ] Reached target System Initialization. Starting LXD - unix socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Started Daily apt download activities. [ OK ] Started Message of the Day. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Listening on Virtual machine log manager socket. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Started Discard unused blocks once a week. [ OK ] Reached target Timers. [ OK ] Listening on Virtual machine lock manager socket. Starting Docker Socket for the API. [ OK ] Listening on LXD - unix socket. [ OK ] Listening on Docker Socket for the API. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. [ OK ] Started D-Bus System Message Bus. [ OK ] Started FUSE filesystem for LXC. [ OK ] Started Precision Time Protocol (PTP) service. Starting LSB: Mount debugfs on /sys/kernel/debug... [ OK ] Started Set the CPU Frequency Scaling governor. Starting LSB: Execute the kexec -e command to reboot system... Starting rng-tools.service... Starting Initialize hardware monitoring sensors... Starting Login Service... [ OK ] Started LTTng session daemon. Starting System Logging Service... [ OK ] Started Regular background program processing daemon. Starting Dispatcher daemon for systemd-networkd... Starting Resets System Activity Data Collector... Starting LSB: Set sysfs variables from /etc/sysfs.conf... Starting LXD - container startup/shutdown... [ OK ] Started System Logging Service. [ OK ] Started Raise network interfaces. [ OK ] Started rng-tools.service. [ OK ] Started Resets System Activity Data Collector. [ OK ] Started Initialize hardware monitoring sensors. [ OK ] Started Login Service. [ OK ] Started LSB: Execute the kexec -e command to reboot system. [ OK ] Started LSB: Mount debugfs on /sys/kernel/debug. [ OK ] Started LSB: Set sysfs variables from /etc/sysfs.conf. Starting LSB: Load kernel image with kexec... [ OK ] Reached target Network. Starting NXP Frame Manager Configuration tool... Starting OpenBSD Secure Shell server... Starting containerd container runtime... [ OK ] Reached target Network is Online. Starting LSB: HPA's tftp server... Starting Internet superserver... [ OK ] Started strongSwan IPsec IKEv1/IKEv2 daemon using ipsec.conf. [ OK ] Started netdata - Real-time performance monitoring. Starting LSB: network benchmark... Starting LXC network bridge setup... Starting Virtualization daemon... [ OK ] Started Unattended Upgrades Shutdown. Starting vsftpd FTP server... Starting Advanced key-value store... Starting Permit User Sessions... [ OK ] Started Internet superserver. [ OK ] Started containerd container runtime. [ OK ] Started vsftpd FTP server. [ OK ] Started Permit User Sessions. [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started NXP Frame Manager Configuration tool. Starting Set console scheme... Starting Weston Wayland Compositor (on tty7)... [ OK ] Started Serial Getty on ttyS0. Starting Docker Application Container Engine... [ OK ] Started LSB: Load kernel image with kexec. [ OK ] Started LSB: HPA's tftp server. [ OK ] Started LSB: network benchmark. [ OK ] Started Set console scheme. [ OK ] Started Advanced key-value store. [ OK ] Started Weston Wayland Compositor (on tty7). [ OK ] Created slice system-getty.slice. [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. [ OK ] Started LXC network bridge setup. Starting LXC Container Initialization and Autoboot Code... [ OK ] Started LXC Container Initialization and Autoboot Code. [ OK ] Started LXD - container startup/shutdown. [ OK ] Started Dispatcher daemon for systemd-networkd. [ OK ] Created slice User Slice of root. Starting User Manager for UID 0... [ OK ] Started Session 1 of user root. [ OK ] Started User Manager for UID 0. Stopping User Manager for UID 0... [ OK ] Stopped User Manager for UID 0. [ OK ] Removed slice User Slice of root. [ OK ] Started Virtualization daemon. Starting Suspend/Resume Running libvirt Guests... [ OK ] Started Suspend/Resume Running libvirt Guests. NXP LSDK 2012 devel localhost login: root Password: Last login: Wed Nov 4 09:14:17 UTC 2020 on tty7 Welcome to NXP LSDK 2012 devel (GNU/Linux 5.4.47-00091-g9ee73a94f0d0 aarch64) * Support: https://www.nxp.com/lsdk * Documentation: https://lsdk.github.io/document * Licensing: https://lsdk.github.io/eula root@localhost:~# root@localhost:~# echo '4 4 1 7' > /proc/sys/kernel/printk root@localhost:~# echo $? 0 root@localhost:~# ls /usr/bin/lsb_release /usr/bin/lsb_release root@localhost:~# echo $? 0 root@localhost:~# echo $HOME /root root@localhost:~# echo $? 0 root@localhost:~# export TERM=linux root@localhost:~# echo $? 0 root@localhost:~# source //root/.bashrc root@localhost:~# echo $? 0 root@localhost:~# alias ls='ls --color=never' root@localhost:~# echo $? 0 root@localhost:~# hostname localhost root@localhost:~# alias grep='grep --color=never' root@localhost:~# echo $? 0 root@localhost:~# stty columns 2000 root@localhost:~# echo $? 0 root@localhost:~# hostname LS1046ARDB root@localhost:~# echo $? 0 root@localhost:~# echo "nameserver 10.192.130.201" > /etc/resolv.conf root@localhost:~# ps -e |grep ssh 766 ? 00:00:00 sshd root@localhost:~# service --status-all | grep -i networkd [ ? ] rng-tools root@localhost:~# echo $? 1 root@localhost:~# sed -i "s/PermitRootLogin prohibit-password/PermitRootLogin yes/g" /etc/ssh/sshd_config root@localhost:~# cat /etc/ssh/sshd_config |grep -i ermitRootLogin PermitRootLogin yes # the setting of "PermitRootLogin without-password". root@localhost:~# sed -i "s/PermitEmptyPasswords no/PermitEmptyPasswords yes/g" /etc/ssh/sshd_config root@localhost:~# cat /etc/ssh/sshd_config |grep -i PermitEmptyPasswords #PermitEmptyPasswords yes root@localhost:~# sed -i 's/#PermitRootLogin yes/PermitRootLogin yes/g' /etc/ssh/sshd_config root@localhost:~# /etc/init.d/ssh restart [....] Restarting ssh (via systemctl): ssh.serviceecho $? [?25l[?1c7[ ok 8[?25h[?0c. root@localhost:~# echo $? 0 root@localhost:~# mount |grep -i boot /dev/mmcblk0p2 on /boot type ext4 (rw,relatime) root@localhost:~# echo $? 0 root@localhost:~# mount | grep tmpfs | grep ram root@localhost:~# echo $? 1 root@localhost:~# ls /media/ram root@localhost:~# echo $? 0 root@localhost:~# mount -t tmpfs tmpfs /media/ram/ root@localhost:~# echo $? 0 root@localhost:~# mount /dev/mmcblk0p4 on / type ext4 (rw,relatime,errors=remount-ro) devtmpfs on /dev type devtmpfs (rw,relatime,size=7950688k,nr_inodes=1987672,mode=755) sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime) proc on /proc type proc (rw,nosuid,nodev,noexec,relatime) securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000) tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755) tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k) tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755) cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime) cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd) pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime) cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory) cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb) cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset,clone_children) cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer) cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct) cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids) cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio) cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices) cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event) hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M) mqueue on /dev/mqueue type mqueue (rw,relatime) debugfs on /sys/kernel/debug type debugfs (rw,relatime) /dev/mmcblk0p2 on /boot type ext4 (rw,relatime) fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime) configfs on /sys/kernel/config type configfs (rw,relatime) lxcfs on /var/lib/lxcfs type fuse.lxcfs (rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other) tmpfs on /run/user/0 type tmpfs (rw,nosuid,nodev,relatime,size=1623500k,mode=700) tmpfs on /media/ram type tmpfs (rw,relatime) root@localhost:~# which iperf /usr/local/bin/iperf root@localhost:~# echo $? 0 root@localhost:~# zcat /proc/config.gz | grep -i caam # CONFIG_CRYPTO_DEV_FSL_CAAM_DMA is not set CONFIG_CRYPTO_DEV_FSL_CAAM_COMMON=y CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC=y CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC=y CONFIG_CRYPTO_DEV_FSL_CAAM_SECVIO=y CONFIG_CRYPTO_DEV_FSL_CAAM=y # CONFIG_CRYPTO_DEV_FSL_CAAM_DEBUG is not set CONFIG_CRYPTO_DEV_FSL_CAAM_JR=y CONFIG_CRYPTO_DEV_FSL_CAAM_RINGSIZE=9 # CONFIG_CRYPTO_DEV_FSL_CAAM_INTC is not set # CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API is not set CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_QI=y CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API=y CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API=y CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API=y # CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_TEST is not set CONFIG_CRYPTO_DEV_FSL_CAAM_SM=y CONFIG_CRYPTO_DEV_FSL_CAAM_SM_SLOTSIZE=7 CONFIG_CRYPTO_DEV_FSL_CAAM_SM_TEST=m CONFIG_CRYPTO_DEV_FSL_CAAM_JR_UIO=y CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM=y root@localhost:~# lsmod Module Size Used by ipt_REJECT 16384 2 nf_reject_ipv4 16384 1 ipt_REJECT xt_addrtype 16384 2 xt_conntrack 16384 2 ip6table_filter 16384 0 ip6_tables 32768 1 ip6table_filter xt_CHECKSUM 16384 2 mali_dp 81920 0 root@localhost:~# modprobe cryptodev root@localhost:~# echo $? 0 root@localhost:~# lsmod |grep cryptodev cryptodev 57344 0 root@localhost:~# echo $? 0 root@localhost:~# export LD_LIBRARY_PATH=/usr/local/lib/ root@localhost:~# echo $? 0 root@localhost:~# export OPENSSL_CONF=/usr/local/openssl/openssl.cnf root@localhost:~# echo $? 0 root@localhost:~# date -s 2020/11/17 Tue Nov 17 00:00:00 UTC 2020 root@localhost:~# echo $? 0 root@localhost:~# ifconfig fm1-mac3 down root@localhost:~# echo $? 0 root@localhost:~# ifconfig fm1-mac3 192.85.100.2 netmask 255.255.255.0 root@localhost:~# echo $? 0 root@localhost:~# ifconfig fm1-mac3 up root@localhost:~# echo $? 0 root@localhost:~# echo $? 0 root@localhost:~# grep -i "QMan portal" /proc/interrupts 22: 0 0 0 2594 GICv2 216 Level QMan portal 3 23: 0 0 0 0 GICv2 218 Level QMan portal 2 24: 0 77 0 0 GICv2 220 Level QMan portal 1 25: 107 0 0 0 GICv2 222 Level QMan portal 0 root@localhost:~# cat /sys/kernel/debug/*/ctl/ob_bytes_encrypted 85437 root@localhost:~# cat /sys/kernel/debug/*/ctl/ib_bytes_decrypted 85533 root@localhost:~# openssl s_client -connect 192.85.100.1:4433 -cipher DHE-RSA-AES128-SHA -tls1 CONNECTED(00000004) Can't use SSL_get_servername depth=0 C = CN, ST = BeiJing, L = ChaoYang=www.freescale.com verify error:num=18:self signed certificate verify return:1 depth=0 C = CN, ST = BeiJing, L = ChaoYang=www.freescale.com verify return:1 --- Certificate chain 0 s:C = CN, ST = BeiJing, L = ChaoYang=www.freescale.com i:C = CN, ST = BeiJing, L = ChaoYang=www.freescale.com --- Server certificate -----BEGIN CERTIFICATE----- MIICrTCCAhagAwIBAgIJAMldbKxmtheLMA0GCSqGSIb3DQEBBQUAMEQxCzAJBgNV BAYTAkNOMRAwDgYDVQQIEwdCZWlKaW5nMSMwIQYDVQQHExpDaGFvWWFuZz13d3cu ZnJlZXNjYWxlLmNvbTAeFw0xNDA0MDIxNDA2MjlaFw0yNDAzMzAxNDA2MjlaMEQx CzAJBgNVBAYTAkNOMRAwDgYDVQQIEwdCZWlKaW5nMSMwIQYDVQQHExpDaGFvWWFu Zz13d3cuZnJlZXNjYWxlLmNvbTCBnzANBgkqhkiG9w0BAQEFAAOBjQAwgYkCgYEA mNvDMBupfF65yuzFHFA2cHkHXU0Nj2ews4Oz4Q1s+YjvrNkgXv/Ms9+C0LcFNOvf ZTPA0TWqTWHueSYD7QR/1Zetwuni+z2y7ktrtyhY2UmnG3ZH0p+1+wHqW5a5ZSYu OXtPkxlDhWUHwNYSgKkhpi8r7A/mDrDNjeJ9VTzJj90CAwEAAaOBpjCBozAdBgNV HQ4EFgQUWR6dJzlhA5Ha78nrpk48D8Ubo7EwdAYDVR0jBG0wa4AUWR6dJzlhA5Ha 78nrpk48D8Ubo7GhSKRGMEQxCzAJBgNVBAYTAkNOMRAwDgYDVQQIEwdCZWlKaW5n MSMwIQYDVQQHExpDaGFvWWFuZz13d3cuZnJlZXNjYWxlLmNvbYIJAMldbKxmtheL MAwGA1UdEwQFMAMBAf8wDQYJKoZIhvcNAQEFBQADgYEAl8r5VT9zGrWkmOKLaPed 25l/4zBr1dyT/5z6vPXo89yLhUBaG7aYrON5S41VVPkftujx4eSGqg+wDD3ShlpI GnZWK13XbTZdgQE12416kSvWaGEOv6NBbzvxz//Ki6zmDT5DZvfAYIPe97d+P5Bn 69cC8F5wCBtEBi02csKf8nA= -----END CERTIFICATE----- subject=C = CN, ST = BeiJing, L = ChaoYang=www.freescale.com issuer=C = CN, ST = BeiJing, L = ChaoYang=www.freescale.com --- No client certificate CA names sent Peer signing digest: MD5-SHA1 Peer signature type: RSA Server Temp Key: DH, 1024 bits --- SSL handshake has read 1546 bytes and written 268 bytes Verification error: self signed certificate --- New, SSLv3, Cipher is DHE-RSA-AES128-SHA Server public key is 1024 bit Secure Renegotiation IS supported Compression: NONE Expansion: NONE No ALPN negotiated SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES128-SHA Session-ID: 1940A108951A089447F124ACC2234D856352B15E8F6464869256C925BA6657B9 Session-ID-ctx: Master-Key: C25857E6C0628FB7DD53D09A7A8100A33D279B4B949A557D8E00DDA463CB85E91F52BB67AC9DA7AA605F44C61296ED12 PSK identity: None PSK identity hint: None SRP username: None TLS session ticket lifetime hint: 7200 (seconds) TLS session ticket: 0000 - ea ba 54 62 b6 eb 4c 23-48 4b fb 8a f1 99 f4 c3 ..Tb..L#HK...... 0010 - 2e 23 02 54 33 59 e6 b1-99 83 0b d6 b6 65 2d 9b .#.T3Y.......e-. 0020 - 1d eb 38 1f a8 1b bf f6-7c ba 75 c6 fc b0 7e 8e ..8.....|.u...~. 0030 - 9c 5b f9 8b 63 c1 c0 a8-fc b3 58 f3 35 7d 2c 9d .[..c.....X.5},. 0040 - 43 78 bf 29 41 dc c1 9b-ab 70 ca 6d cc 66 9c 81 Cx.)A....p.m.f.. 0050 - 2c 95 ee cb 22 d4 c7 30-53 1d c2 cd 18 b3 d2 e5 ,..."..0S....... 0060 - 33 c9 82 34 bb 92 91 fc-4b 34 06 63 a6 50 30 c6 3..4....K4.c.P0. 0070 - a2 30 6b 57 79 4f f8 f5-e6 48 9b c6 36 71 6f 64 .0kWyO...H..6qod 0080 - 97 d6 bf b7 5f d0 ec 8f-99 fd 7b ab 6e fa 30 ce ...._.....{.n.0. 0090 - 04 05 71 53 42 c1 44 1d-61 51 87 d5 c0 66 6c 8a ..qSB.D.aQ...fl. Start Time: 1605571253 Timeout : 7200 (sec) Verify return code: 18 (self signed certificate) Extended master secret: yes --- test DHE-RSA-AES128-SHA from server test DHE-RSA-AES128-SHA from client Can't use SSL_get_servername read R BLOCK 281473810818688:error:1408F10B:SSL routines:ssl3_get_record:wrong version number:ssl/record/ssl3_record.c:308: root@localhost:~# ls bonding.ko dpdkfiles l2fwd-event root@localhost:~# grep -i "QMan portal" /proc/interrupts 22: 0 0 0 2602 GICv2 216 Level QMan portal 3 23: 0 0 8 0 GICv2 218 Level QMan portal 2 24: 0 101 0 0 GICv2 220 Level QMan portal 1 25: 130 0 0 0 GICv2 222 Level QMan portal 0 root@localhost:~# cat /sys/kernel/debug/*/ctl/ob_bytes_encrypted 85869 root@localhost:~# cat /sys/kernel/debug/*/ctl/ib_bytes_decrypted 85821 root@localhost:~# telnet>