Where is the detail bootmode list of imx6solo?

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Where is the detail bootmode list of imx6solo?

488 Views
翔李
Contributor IV

HI,

I did not find the boot mode list of imx6solo,where is the detail boot mode setting list,EIM_XXXX?

I am going to boot from 32MBYTE-SPI NOR FALSH orTFcard-SD2.

pastedImage_1.png

pastedImage_2.png

0 Kudos
3 Replies

385 Views
igorpadykov
NXP Employee
NXP Employee

Hi

please check Chapter 8 System Boot i.MX6SDL Reference Manual

http://cache.freescale.com/files/32bit/doc/ref_manual/IMX6SDLRM.pdf

Best regards
igor
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

0 Kudos

385 Views
翔李
Contributor IV

Thanks.Can you tell me what is the setting way to boot from spi flash 32MB or TFcard-sdio3? just like my sch. in my last question.

What's more,I knew the chapter8 system boot,but I did not find the full detail description list of bootmode setting.For example,the list includes boot_cfg1[0:7],boot_cfg2[0:7],boot_cfg3[0:7],boot_cfg4[0:7].Also,chapter5 fusemap does not include the full list.

Thank you so much,because I am poor in designing.

0 Kudos

385 Views
igorpadykov
NXP Employee
NXP Employee

may be useful to look at p.3 Sabre AI i.MX6DL schematic SCH-27767

Schematics (5)
Design files for i.MX 6Quad and i.MX 6DualLite CPU1 Cards
Design files for Base Board (REV E)

http://www.nxp.com/products/software-and-tools/hardware-development-tools/sabre-development-system/s...

Best regards
igor

0 Kudos