We are using KW36A for our product and in it we want to test the BTLE TX and RX service for RF.
based on my previous question, I came to know already that we have Test tool(
Test tool requires 2 devices to be connected with it (One is the DUT and another one is the responder for the result).
Consider our case, KW36 in embedded inside a product and its UART is already connected with Meter (its a same PWB).
we can send some specific command to KW36 from meter to put it in Test mode or TX and RX mode.
however how are we going to get the result using Test tool in such case, how can be connect the embedded KW36 with test tool .
we can buy freedom board to return the result and based on that we can check pass and failed condition.
So question is how can be use the test tool effectively in such case?