MPC777C_eTPU_inputcapture

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

MPC777C_eTPU_inputcapture

676 Views
dreamtea81125
Contributor II

Hi NXP

I have question about input capture by eTPU.
I can use PWM function.
So i connected the pin of PWM with the pin of input capture.
but i didn't capture any signal by input capture function.
What's wrong with my code ?
There are my code. thank you.
Any advice is helpful.
1 Reply

584 Views
PetrS
NXP TechSupport
NXP TechSupport

Hi,

most probably the IGF filter, which is added on some pins, is not properly set.

You can refer to below example for frequency measuring; 

https://community.nxp.com/docs/DOC-343522 

BR, Petr