Example MPC5675K PinToggleStationery LSM CW210

File uploaded by David Tosenovjan Employee on Nov 12, 2014Last modified by David Tosenovjan Employee on Jul 29, 2015
Version 7Show Document
  • View in full screen mode


* Detailed Description:

* Application performs basic initialization, setup PLL to maximum allowed freq.,

* initializes interrupts, blinking one LED by interrupt, second LED by software

* loop, initializes and display notice via UART terminal and then terminal ECHO.

* The example configures the device for maximum performance (OPTIMIZATIONS_ON)

* by initialization of instruction/data cache and enabling of branch prediction.

* Example suppose MCU is configured for LSM (Lock-step mode).

* Its intention is to offer advanced startup code additional to CW stationery.


* ------------------------------------------------------------------------------

* Test HW:        MPC5675KEVB

* MCU:            PPC5675KFMMSJ in Lock-Step mode

* Fsys:           180/150 MHz CORE_CLK

* Debugger:       Lauterbach Trace32

*                 PeMicro USB-ML-PPCNEXUS

* Target:         RAM, internal_FLASH

* Terminal:       19200-8-no parity-1 stop bit-no flow control on eSCI_A

* EVB connection: default