• Compilation error after updating SDK

    How to switch from QN908x SDK version to the next new version - Would like to know what needs to be taken into considered from the Project implementation point of view. Am facing issue after updating the SDK to the ne...
    Kishan Saralaya
    last modified by Kishan Saralaya
  • Reader for SL3S1203_1213 ?

    What is the best reader for SL3S1203_1213 ? In particular I am interested in using the tamper alarm function present in G2iL+  I am in the development phase, so I only need a reader that is compact, easy ...
    leo torchia
    last modified by leo torchia
  • QN908x OTAP_Clinet_ATT won't work

    Dear Sir            I can’t see NXP_OTAA in IOT Tool box after I follow API Guide based on newest QN9080 SDK.            Could yo...
    Li-Chin Wang
    last modified by Li-Chin Wang
  • HTRC11001T Communication with STM32

    Hi all,   We are trying to use HTRC11001T with stm32F030K6 as a RFID module and having a hard time to get the response  from HTRC11001T. It seems HTRC11001T is using a SPI-like protocol. But there...
    Henry Wong
    last modified by Henry Wong
  • kw36 fsci bb start advertise or make connection test demo

    Hi, dear NXP engineer i am using the KW36 freedom board. i have run the FSCI demo. i just run some simple fsci command sending in the NXP TEST TOOL.    would you please give some complex command test. like...
    yuan xiao
    last modified by yuan xiao
  • QN908x BLE application fails to pair and bond  with BLE version 4.0

    Hello , Taken the FreeRTOS "wireless_example\Hid_device" example from the SDK example. Configure the pairing parameters to    .securityModeAndLevel = gSecurityMode_1_Level_2_c, .maxEncryptionKeySize = mcEn...
    Kishan Saralaya
    last modified by Kishan Saralaya
  • 88W8977/8987/8997 support STAR topology?

    According to Connected IoT Roadmap, 88W8977/8987/8997 features BLE Mesh. They supports STAR topology as well? or only support BLE Mesh?   Thanks,
    Andy Kim
    last modified by Andy Kim
  • MKW37 supports STAR and MESH topology?

    Dear NXP,   I could not find if MKW37 supports STAR and MESH topology on DistyNet.   Could you let me know if MKW37 supports STAR and MESH topology as well?   Thanks, Andy
    Andy Kim
    last modified by Andy Kim
  • KW38 HardFault

    Hello,   Request your kind support for solving HardFault issue on FRDM KW38 board during BLE operations of a custom app (GAP central) with a mobile app (peripheral). Target hardware: FRDM KW38 SDK: MKW38A512xx...
    Prince John
    last modified by Prince John
  • Zigbee Security issue with FRDM-KW41Z

    We are trying to get the FRDM-KW41Z eval board with  frdmkw41z_wireless_examples_zigbee_3_0_end_device_freertos example(SDK version: 2.2.1) connect with our zigbee network. After our ZC device replied a successfu...
    Jason Jiang
    last modified by Jason Jiang
  • Unable to receive 802.15.4 beacon frame when coordinator in beacon mode

    I'm unable to receive 802.15.4 beacon frame when using beacon mode.   I have imported frdmkw41z_wireless_examples_ieee_802_15_4_mwa_coordinator_freertos as a coordinator and frdmkw41z_wireless_examples_ieee...
    Paweł Górski
    last modified by Paweł Górski
  • QN9090 - QTool WUART profile is not working

    Hello team, My customer working with our QN9090-DK006 and OM15080-QN9090 (dongle) and he tries to use WUART communicate with the QTool WUART service. but when he tries to bond the BLE disconnect, I underst...
    Shai Berman
    last modified by Shai Berman
  • QN9080 - Voice Over BLE

    Hello team,   My customer is looking for ultra-low power Voice Over BLE solutions? Could you please advise if our QN9080 supports VoBLE/VoGT or there are other NXP BLE device which supports Voice over BLE? ...
    Shai Berman
    last modified by Shai Berman
  • PWM Timer on the Wireless UART example not working

    Hi,   I am usgin the QN9090DK.   I have followed the code in the pwn_output sample project to define my own PWM timer in the wireless_uart sample project. While the timer is operational in the pwn_output p...
    sharon urban
    last modified by sharon urban
  • QN9090 - working with SDCARD

    Hello Team,   My customer needs to implement SDCARD but he did not found any material to perform such SD card implementation with the QN9090 Dev kit. please advise if there is an example code to add an SD ...
    Shai Berman
    last modified by Shai Berman
  • gAttErrCodeInsufficientEncryption_c error in client mode

    Hello members, I have 2 boards in my architecture one in client central and one in the server peripheral configuration. These are my pairing parameters of both side gapPairingParameters_t gPairingParamete...
    rahul singh
    last modified by rahul singh
  • Using KW39/38/37 as HCI dongle

    Hi,    I'm join a project. Our application need a chip which support "coded and 2M PHY" and could direct control by HCI uart. Does KW39/38/37 meet our needs? If yes, which one do you recomme...
    Jay Lee
    last modified by Jay Lee
  • Datasheet for PQJ7981?

    Where can I find the technical Data sheet for NXP LoPSTer (PQJ7981)? All I am able to find so far is a product brochure: https://www.nxp.com/docs/en/brochure/75017268.pdf    Is this still an active suppor...
    Joel Krawczyk
    last modified by Joel Krawczyk
  • How to get PCIe MSI running instead of LEGACY mode (LS1028A)

    Hi NXP team,   we are using a custom board based on LS1028A and linux(LSDK-19.09-update-311219-V4.14). The board uses a wifi modem(WLE600VX with Qualcomm-Atheros QCA9882 chipset) attached to PCIe. The drive...
    Yuvarajesh Valleru
    last modified by Yuvarajesh Valleru
  • QN9090 - using all 8 ADC ch.

    Hello team,   According to the QN9090 Datasheet, there are 8 channels of ADCs. But after following the documentation, the ADC6 and ADC7 are for internal use for example measuring the internal temperat...
    Shai Berman
    last modified by Shai Berman