• Workspace will not connect with KDS?!!!

    I have selected my workspace location, and the project explorer is empty. I have also switched the workspace using the File directory but the explorer remains empty. It seems like there is a discontinuity between the ...
    Jose Tafolla
    last modified by Jose Tafolla
  • KDS project wizard

    Hi I need to maintain a project based on K27. I'd like to test on frdm K27 some things before to work on the official project but I can not see in the wizard menu the K27 freedom board just to start. From the new pr...
    Claudio Brunelli
    last modified by Claudio Brunelli
  • The project description file (.project) for my project is missing

    Context: I know that KDS is being phased out, but I have a client who needs a bugfix.    Problem: When I launched KDS 3.2 with the client's workspace, I got the message: The project description file (.proj...
    Robert Poor
    last modified by Robert Poor
  • assert() behaviour

    KDS 3.0 SDK 1.2 Using MQX   I'm using assert() to check some parameter ranges.   When it is triggered it drops into a infinite loop and nothing is output on the debug console. There isn't any source for...
    Randy Hermes
    last modified by Randy Hermes
  • Failure in the NXP Website. Cant find page.

    Hi,   When I go in the page https://community.nxp.com/docs/DOC-103698 to bottom and click on Kinetis design studio page then I get an error that the page is not found.   Best regards, Osto
    Mehrdad Ostovary
    last modified by Mehrdad Ostovary
  • KV58 S19 file

    Hi,   I am using "arm-none-eabi-objcopy --srec-len=64 --srec-forceS3 -O srec "aaa.elf"  "aaa.S19"" to generate S19 file. The generated S19 as follows. At the end of file, it is not 64-bit alignment... " ...
    Christie Su
    last modified by Christie Su
  • srec file is not deleting on clean

    Hello Team,   https://community.nxp.com/thread/445108 above link worked for me to generate srec file.    My question is upon Clean, only elf file is getting deleted and srec file is not getting delet...
    sudhanshu mehta
    last modified by sudhanshu mehta
  • Hexiwear programming on KDS

    Hi, I am being interrupted to program Hexiwear because of error that appear while build process.  When I try build MK64 KDS that error comes up. What should I do for that?
    Subin Seonwoo
    last modified by Subin Seonwoo
  • Memory Problems with KE06Z

    I am using the MKE06Z128 44 pin chip to replace the current processor for our company. I have been trying to understand memory issues and where my problems may lie.    Currently I have strange problems...
    cody hubman
    last modified by cody hubman
  • KDS Projects in Windows 7 transfer to Windows 10

    Hello,   We have a firmware project that's based-on Kinetis MK22FX512 MCU which was developed in Kinetis Design Studio v3.0.0 using KSDK  v1.3.0, all under Windows 7.     I took ov...
    M I
    last modified by M I
  • Problems with importing NXP examples into Codewarrior V11.1

    Hi, I loaded the examples for Gen4xs switches (Gen4eXtremeSwitch_PEx_SW.zip) and wanted to add the examples to Codewarrior workspace. I created a new project with existing code, select the directory and let copy the ...
    Mehrdad Ostovary
    last modified by Mehrdad Ostovary
  • Semi-Hosting in Kinetis Design Studio with MQX

    Hello, When I build a baremetal project in Kinetis Design studio using the KSDK I can successfully get semi-hosting to work with printf outputs on the console inside of KDS. This is configured in the Debug Configurat...
    jschepler
    last modified by jschepler
  • fatal error: PE_low_level_init.h: No such file or directory

    Hi everyone. I'm having a problem (actually two) when compiling my project. When I do it, I get this message that you can see on the image below. The first error, the file exist, but it is in another path. I ...
    Nícolas Ludwig
    last modified by Nícolas Ludwig
  • Can't Install New Software in KDS 3.2

    Hello,  I have installed KDS 3.2 today and have been trying to follow this introduction, https://www.allaboutcircuits.com/projects/getting-started-with-freescales-kinetis-design-studio/ however whenever I try ...
    Stephen Bates
    last modified by Stephen Bates
  • OM13260 replacement board

    Hi,   I would like to use efficient NXP Fm program for testing PCAL6524 build boards. What is replacement for use USB to I2C interface OM13260 board, which not more manufactured. Can I connect FRDM-MKL25Z demo b...
    Marceli Firlej
    last modified by Marceli Firlej
  • Use MIMXRT1052CVL5B Drive FT6336U

    Use the SDK_2.5.0_MIMXRT1052xxxxB2\boards\evkbimxrt1050\emwin_examples\emwin_gui_demo drive the FT6336U TFT LCD. First I used the demo touchpanel code fsl_ft5406_rt.c, change the I2C_slave_ADDRESS,find the c...
    DEGANG YU
    last modified by DEGANG YU
  • How to send 2 or more bytes of data by using PE KEA128

    Hi all,      I'm developing some audio application with KEA128, I was able to generate a sound using analog ports mainly PWM, for now, I moved to a digital audio application which KEA128 not so strong...
    Sheng Zhang
    last modified by Sheng Zhang
  • Function placed in RAM - assembler warnings

    Hello everybody, I'm using KDS 3.0.0 and the micro is Kinetis K10. I need to place a function in RAM (and of course run it from there!) As suggested in the application notes "Relocating Code and Data Using the ...
    alessandro carozzi
    last modified by alessandro carozzi
  • TWR-K60f120m and FRDM-K64f CAN communication

    I'm trying to setup CAN communication between the FRDM-K64f and the TWR-K60f120m with a TWR-SER board. I'm running the Flexcan example from the KSDK for the FRDM and the Flexcan example from MQX 4.2 for the TWR. I was...
    Timothy Smith
    last modified by Timothy Smith
  • Can we store hex data through UART into flash and RUN it from that particular location

    I am trying to store my hex file in another sector of the flash memory i.e (0x00050000) I want to store a hex file at different sector of the flash and to change the execution point to that address through my bootload...
    Keerthana R
    last modified by Keerthana R