• System Controller Firmware 101 - Resource management service

    The resource management service offers the possibility to divide the system into groups of resources or partitions. Resources within a partition can not access resources outside of it's partition. Partitioning a syst...
    manuelrodriguez
    last modified by manuelrodriguez
  • i.MX8X 网上设计资源向导

    www.nxp.com公网资源 .............................................. 2 1.1 www.nxp.com Documentation ................................ 3 1.2 www.nxp.com Tools&Software ............................... 7 2 nxp share point资...
    John Li
    last modified by John Li
  • Enable Ethernet for Android Auto with mek_8q

    Default Ethernet feature is removed for Android Auto (both Android_Pie9.0 and Android10) Below are the patched to bring Ethernet feature back to Android Auto. Please try to apply the according patches if you want to e...
    Andy Tian
    last modified by Andy Tian
  • How to change kernel configuration on Android build

    Tested on Android 10 (android_Q10.0.0_1.0.0)   After your the first BSP build the kernel sources are at: ${MY_ANDROID}/vendor/nxp-opensource/kernel_imx/   For the i.MX8M Mini, You can check the defconfig f...
    Renato Nogueira Frias
    last modified by Renato Nogueira Frias
  • Achieve Exceptional Graphics for IoT Devices of Tomorrow with NXP's i.MX 8M Nano Applications Processor.pdf

    Ethan Fernandes
    last modified by Ethan Fernandes
  • iMX8QXP: Use JPEG decoder in M4 SDK

    iMX8QXP/iMX8QM have hardware JPEG decoder: The JPEG-D-X core. This is the example code to use this hw decoder in M4 SDK to decode JPEG files.     M4_JPEG_DECODER_SDK_2.5.1.7z The attached "rear_view_c...
    Qiang Li - Mpu Se
    last modified by Qiang Li - Mpu Se
  • Manually build Boot binary for i.MX8M Mini

    Sometimes it is helpful/faster to build a i.MX8MM boot binary outside of the Yocto environment.   There are instructions on how to accomplish this on different places, this document tries to provide an example f...
    Renato Nogueira Frias
    last modified by Renato Nogueira Frias
  • i.MX8 MSCALE SERIES DDR Tool Release (V3.10)

    Important: For any comment/questions related with this document, create your question here https://community.nxp.com/community/imx Private messages will be ignored.          i.MX8MS...
    Oliver Chen
    last modified by Oliver Chen
  • ISL79987 and adv7180 de-interlace driver for iMX8QXP boards

    adv7180 is the 8 bits parallel CSI interface TVin to iMX8QXP validation board. Its weaving mode de-interlace can be supported on both iMX8QXP B0 and C0 chips, but blending mode de-interlace can only work on iMX8QXP C...
    Qiang Li - Mpu Se
    last modified by Qiang Li - Mpu Se
  • Create an Ubuntu VM environment to build Yocto BSP

    Tool: VMware Workstation Player Linux Distribution : Ubuntu 16.04   1. Create the VM in VMware Workstation.     2. Select the .iso file to install the Ubuntu 16.04 in the VM.     3. In...
    jimmychan
    last modified by jimmychan
  • System Controller Firmware 101

    This is a series of documents that intend to help you grasp he concept of the System Controller Unit (SCU) / System Controller Firmware (SCFW).    Getting started Power management service  Resource mana...
    manuelrodriguez
    last modified by manuelrodriguez
  • AndroidSDCARDMirrorCreator

    This tool is also for emmc user partition mirror. Just give this tool the emmc files. The typical use case is for emmc mass production by emmc offline programming.   Ver 0.4.0 2/14/2017 Support And...
    Biyong Sun
    last modified by Adrian Puga Candelario
  • Patch to enable SSI_ASRC_P2P_capture function based on Kernel_3.0.35_SabreSD_Board

    Here are two patchs: Patch 1: 0001-I.MX6-SSI_ASRC_P2P_Capture-for-SabreSD-board-Kernel-.patch Patch 2: 0001-I.MX6-SSI_ASRC_P2P-Capture-for-SebreSD-board.patch Patch 1 is based on patch 2.     memory &...
    Lei Ge
    last modified by Adrian Puga Candelario
  • i.MX51 WINCE600 eCSPI Support Multiple Bursts Mode and Wait States

    In the i.MX51 default WINCE6  release, the eCSPI doesn't support multiple bursts mode and set the wait states. Attached was the document and code for how to enable the multiple bursts mode and how to set the wai...
    Justin Jiang
    last modified by Adrian Puga Candelario
  • New Headphone Jack Patch based on Kernel 3.0.35 for imx6_sabresd board

    In the older code, headphone router is always on, it is not a good choose for low power demand. This patch uses imx_hp_jack_gpio.jack_status_check to instead of w->event. It enables Ext Spk and disables Headphone J...
    Lei Ge
    last modified by Adrian Puga Candelario
  • i.MX6UL PWM output clock not stable issue

    On L4.1.15 BSP, PWM output clock may be not stable, for example, it may switch between 200KHz and 50KHz. PWM clock source is perclk, in running mode, perclk is 24MHz, while in low power idle mode, perclk is reduced to...
    Shaojun Wang
    last modified by Adrian Puga Candelario
  • SDK and OBDS using ARM DS-5

    This document explains how to create a DS-5 project to compile and debug the SDK and OBDS for iMX6 and iMX28 respectively.   Attached you can find the .ds file for the iMX28 needed to debug in DS-5.
    alejandrolozano
    last modified by Adrian Puga Candelario
  • How to enable SSI1 double FIFO on i.MX51 WINCE600

    In the default release the SSI1 doesn't suport double FIFO in audio driver. Attached was the code to support double FIFO with updated DMA script.
    Justin Jiang
    last modified by Adrian Puga Candelario
  • BDI3000 config file with iMX6 DDR initialization

    Here is a BDI3000 config file I used with a SABRE SD board sometimes ago that includes DDR initialization. I had several request on this in the past so I am placing it here in case anyone needs it. Please feel free...
    Sinan Akman
    last modified by Adrian Puga Candelario
  • Patch to enable SSI_ASRC_P2P capture function for SebreSD board

    Patch to enable SSI_ASRC_P2P capture function for SebreSD board Modified based on https://community.freescale.com/docs/DOC-95342#comment-9739 You can use 'arecord -Dhw:0,1 -c 2 -f S16_LE -r 44100 | aplay' to test thi...
    Lei Ge
    last modified by Adrian Puga Candelario